2013 Dodge Suspension Ball Joint Parts
Choose a Model for your 2013 Dodge
Image
Product
Price
- Ball Joint
- Non-Adjustable Type Both New and Original Designs can be Installed on Vehicle
- MOOG K80996 Ball Joint
- Product Attributes:
- Suspension Grade Type: Standard
- Maximum Outside Diameter: 2.240
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2013 - Dodge Charger | Front Lower Rearward | RWD |
- Ball Joint
- Non-Adjustable Type Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces New Pre-Installed Integral Dust Boot Allows For Ease Of Installation Both New and Original Designs can be Installed on Vehicle
- MOOG K80996 Ball Joint
- Product Attributes:
- Suspension Grade Type: Standard
- Maximum Outside Diameter: 2.240
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2601744, 45D2442, 46D2442A, 4782740AA, 4782740AB, 4782740AC, 4782740AD, 4782741AB, 505-1433, 505-1433B, 5290539AB, 5290547AB, 531-284, 610.63013, 68159271AA, BJ81155, BJ82285, FA2383E...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2013 - Dodge Charger | Front Lower Rearward | RWD |
- Suspension Ball Joint
- Improved Design
- Product Attributes:
- Dust Boot Material: Rubber
- Attachment Type: Taper
- Housing Press Fit Diameter: 41.15 Mm
- Stud Thread Diameter: 14
- Suspension Grade Type: Standard
- Bearing Material: Polymer
- Mounting Hole Quantity: 0
- Mounting Type: Press
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension ball joint is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1006023, 10480996, 45D2442, 4782706AA, 610.63013, FA2383, GS25505, JBJ1044, K80996, MS25505, TC5042
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2013 - Dodge Charger | Front Lower Rearward | RWD |
- Ball Joint
- Design Allows Easier Installation
- MOOG K500235 Ball Joint
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
50900033AB, 5090033AA, 5090033AB, BJ81155, MS25503
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Dodge Journey | Front Lower |
- Ball Joint
- MOOG K500235 Ball Joint
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Dodge Journey | Front Lower |
- Ball Joint; Lower;
- Ball Joint
-
Features:
- Ball Joint
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Dodge Durango | Lower |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Dodge Journey | Front |
- Ball Joint
- Knurled Type
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Which Is Known To The State Of California To Cause Cancer. For More Information Go To Www.p65warnings.ca.gov.
- Tapered Stud: Yes
- Grade Type: Regular
- Mounting Hardware Included: Yes
- Steering Type: Power
- Maximum Outside Diameter:
- 2.283
- 58.00
- Wrench Size: 6 Mm
- Greaseable: No
- Ball Joint Assembly: Yes
- Cotter Pin Hole: No
- Dust Boot Material: Rubber
- Stud Type: Threaded
- Adjustable: No
- Mount Plate Included: No
- Suspension Grade Type: Standard
- Stud Thread Pitch: 1.50
- Wear Indicator Included: No
- Cotter Pin Included: No
- Retaining Ring Included: Yes
- Stud Thread Length:
- 0.984
- 25.00
- Mounting Bolts Included: No
- Stud Tapered End 2 Diameter:
- 0.756
- 19.20
- Thread Direction: Counterclockwise (left)
- Washers Included: No
- Castle Nut Included: No
- Grease Fitting Included: No
- Attachments Included: No
- Stud Thread Diameter:
- 0.551
- 14.00
- Position(s): Front Lower Rearward
- Reinforced: No
- Dust Boot Included: Yes
- Stud Tapered End 1 Diameter:
- 0.602
- 15.30
- Bearing Type: Plastic
- Mounting Type: Press-in
- Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
4782740AB, 4782740AD, 68159 271AA, K80996, MS25505
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2013 - Dodge Charger | Front Lower Rearward | RWD |
- Ball Joint
- Knurled Type
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Which Is Known To The State Of California To Cause Cancer. For More Information Go To Www.p65warnings.ca.gov.
- Tapered Stud: Yes
- Grade Type: Regular
- Mounting Hardware Included: Yes
- Steering Type: Power
- Maximum Outside Diameter:
- 2.138
- 54.30
- Wrench Size: 6 Mm
- Greaseable: No
- Ball Joint Assembly: Yes
- Cotter Pin Hole: No
- Dust Boot Material: Rubber
- Stud Type: Threaded
- Adjustable: No
- Mount Plate Included: No
- Suspension Grade Type: Standard
- Stud Thread Pitch: 1.50
- Wear Indicator Included: No
- Cotter Pin Included: No
- Retaining Ring Included: Yes
- Stud Thread Length:
- 0.913
- 23.20
- Mounting Bolts Included: No
- Stud Tapered End 2 Diameter:
- 0.748
- 19.00
- Thread Direction: Counterclockwise (left)
- Washers Included: No
- Castle Nut Included: No
- Grease Fitting Included: No
- Attachments Included: No
- Stud Thread Diameter:
- 0.472
- 12.00
- Position(s): Front Lower
- Reinforced: No
- Dust Boot Included: Yes
- Stud Tapered End 1 Diameter:
- 0.610
- 15.50
- Bearing Type: Plastic
- Mounting Type: Press-in
- Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
5085 914AB, 5085 914AC, 5090 033AA, 5090033AB, BJ81225XL, K05090033AA, K500120, MS25503
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Dodge Journey | Front Lower |
- Ball Joint
- Knurled Type Non-Adjustable Type Greasable
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Which Is Known To The State Of California To Cause Cancer. For More Information Go To Www.p65warnings.ca.gov.
- Tapered Stud: Yes
- Grade Type: Regular
- Mounting Hardware Included: Yes
- Steering Type: Power
- Maximum Outside Diameter:
- 2.283
- 58.00
- Wrench Size: 6 Mm
- Greaseable: No
- Ball Joint Assembly: Yes
- Cotter Pin Hole: No
- Dust Boot Material: Rubber
- Stud Type: Threaded
- Adjustable: No
- Mount Plate Included: No
- Suspension Grade Type: Standard
- Stud Thread Pitch: 1.50
- Wear Indicator Included: No
- Cotter Pin Included: No
- Retaining Ring Included: No
- Stud Thread Length:
- 1.063
- 27.00
- Mounting Bolts Included: No
- Stud Tapered End 2 Diameter:
- 0.789
- 20.05
- Thread Direction: Counterclockwise (left)
- Washers Included: No
- Castle Nut Included: No
- Grease Fitting Included: No
- Attachments Included: No
- Stud Thread Diameter:
- 0.551
- 14.00
- Position(s): Front Upper
- Reinforced: No
- Dust Boot Included: Yes
- Stud Tapered End 1 Diameter:
- 0.659
- 16.75
- Bearing Type: Plastic
- Mounting Type: Press-in
- Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
68022626AB, 68046 195AD, 68046 195AE, 68046 195AF, 68046 196AD, 68046 196AE, 68046 196AF, 68217808AB, 68217809AB, CMS251101, K500285
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Dodge Durango | Front Upper |
Showing 1 - 10 of 25 products
Loading...