Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Mazda 2 | Front |
- TQ offers premium suspension parts at reasonable pricing and have been the reference accross North America for over 40 years.
- Top Quality
-
Features:
- TQ powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
- TQ engineered steel composition results in a stronger component. Our full-ball metal stud provides smooth, consistent, rotational movement resulting in more responsive steering
- TQ greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2601858, 532-643, BJ21115, K500255, MS40534
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Mazda 2 | Front Lower |
- TQ offers premium suspension parts at reasonable pricing and have been the reference accross North America for over 40 years.
- Top Quality
-
Features:
- TQ powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
- TQ engineered steel composition results in a stronger component. Our full-ball metal stud provides smooth, consistent, rotational movement resulting in more responsive steering
- TQ greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1076501, 2601687, 505-1391, 531-367, 539-302, BJ65215, BJ65215XL, BJ96016, CP1235, GS76501, K500136, K500209, MS76501, TK500136, TXMS76501
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Mazda 3 Sport | Front Lower |
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
- TOR
-
Features:
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
- TOR engineered steel composition (40cr+) results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- An enlarged ball joint receptacle in the control arm can cause a loose ball joint fit. TOR exclusive design includes an oversized housing for a more secure fit
- Dust boot is re-installed and permanently attached to reduce contaminants, and increase durability and service life
- Full-ball type studs are manufactured using a cold-formed process to reduce imperfections and hold the tightest of tolerances
- TOR greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2601858, 532-643, BJ21115, K500255, K500331, MS40534
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Mazda 2 | Front Lower |
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
- TOR
-
Features:
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
- TOR engineered steel composition (40cr+) results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- An enlarged ball joint receptacle in the control arm can cause a loose ball joint fit. TOR exclusive design includes an oversized housing for a more secure fit
- Dust boot is re-installed and permanently attached to reduce contaminants, and increase durability and service life
- Full-ball type studs are manufactured using a cold-formed process to reduce imperfections and hold the tightest of tolerances
- TOR greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1076501, 2601687, 505-1391, 531-367, 539-302, BJ65215, BJ65215XL, BJ96016, BJ96016XL, CP1235, GS76501, K500136, K500209, MS76501, TK500136, TXMS76501
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Mazda 3 Sport | Front Lower |
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
- TOR
-
Features:
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
- TOR engineered steel composition (40cr+) results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- An enlarged ball joint receptacle in the control arm can cause a loose ball joint fit. TOR exclusive design includes an oversized housing for a more secure fit
- Dust boot is re-installed and permanently attached to reduce contaminants, and increase durability and service life
- Full-ball type studs are manufactured using a cold-formed process to reduce imperfections and hold the tightest of tolerances
- TOR greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2601931, BJ65295, BJ65295PR, CP1741, K500395, MS76505, N/A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Mazda CX-5 | Front Lower |
- Ball Joint
- Design Allows Easier Installation
- MOOG K500209 Ball Joint
- Product Attributes:
- Adjustable: No
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
539-302, B37F34300A, B37F34300B, B37F34350A, B37F34350B, B39D34350A, BJ65215
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Mazda 3 | Front Lower |
- Ball Joint
- Includes Greasable Socket Design to Reduce Corrosion and Wear
- MOOG K500205 Ball Joint
- Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2601862, 45D10181, 5051533, 610.61034, 8T4Z3078A, 8T4Z3079A, BJ86265, MS40521, TD1134300B, TD1134300D, TD1134350B, TE6934350, TE6934350C
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Mazda CX-9 | Front Lower |
- Ball Joint
- Standard Design
- MOOG K500205 Ball Joint
- Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Mazda CX-9 | Front Lower |
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
- Use To Depletion, Then Use TOR-K500205
-
Features:
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
- TOR engineered steel composition (40cr+) results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- An enlarged ball joint receptacle in the control arm can cause a loose ball joint fit. TOR exclusive design includes an oversized housing for a more secure fit
- Dust boot is re-installed and permanently attached to reduce contaminants, and increase durability and service life
- Full-ball type studs are manufactured using a cold-formed process to reduce imperfections and hold the tightest of tolerances
- TOR greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2601794, 537-083, BJ86265, K500244
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Mazda CX-9 | Front Lower |
Showing 1 - 10 of 11 products
Loading...