Image
Product
Price
- Control Arm;
- Control Arm
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Control Arm
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1991 - Jeep Cherokee | Front Upper |
- Control Arm;
- Control Arm
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Control Arm
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1991 - Jeep Cherokee | Rear Upper |
- Lower; 40 Percent Lighter Than OEM; Includes Spherical Wheel Hub Joint/Elastomeric Bushings; Forged 6061-T6 Aluminum; Black Anodized; Set of 2
- Ultra Series Control Arm Set; Lower; 40 Percent Lighter Than OEM; Includes Spherical Wheel Hub Joint/Elastomeric Bushings; Forged 6061-T6 Aluminum; Black Anodized; Set of 2;
- Ultra Series Control Arm Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Lead; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Forged 6061-T6 Billet Aluminum
- CNC Machined To A Precise Fit And Finish
- 15% Lighter Than Previous Skunk2 LCAs
- 40% Lighter Than OEM Arms
- 7% Stronger Than Previous Skunk LCAs
- Tuned Durometer Elastomeric Bushings To Damp Out Harshness
- Delrin Shock Bushings For Low Friction w/Minimal Deflection
- Skunk2 has done it again. While others are busy imitating our LCA's, Skunk2 engineers have spent years of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is proud to announce the release of its Alpha Series Lower Control Arms for the '88-'95 Civic/ CRX and '90-'01 Integra. The Alpha Series LCA's are based off of the same technology the company's been using in its own race cars for 20 years and are a must-have for enthusiast looking to fine-tune their suspension for maximum handling performance while keeping budget in mind. Skunk2's Rear Lower Control Arms are direct replacements, maintain OEM suspension geometry, and are ideal for street and race applications. When deciding on a material to base our new design on, we chose very carefully, as there are many inferior annealed and cheap versions of aluminum available on the market today. We chose 6061-T6 because of its excellent strength to weight ratio. With an ultimate tensile strength of over 42,000 PSI, and fatigue strength of 14,000 psi for 500 million cycles – we knew this would be perfect for the Alpha Series Lower Control Arms. The result of our re-engineered lower control arm is a 6061-T6 Forged Aluminum LCA, that is 15% lighter and 7% stronger than our previous generation of LCA's. Accurate suspension geometry is maintained under the most aggressive driving conditions using high load steel spherical bearings on the trailing arm side and tuned durometer elastomeric bushings for the sub frame side of the LCA. Delrin bushings are utilized at the shock mounting position for their low friction and minimal deflection for unparalleled dynamic shock control. Using this specific combination of bushings allows the most comfort and control under any driving conditions. Properly designed suspension components must be strong and functional first and aesthetically pleasing second. Skunk2's Rear Lower Control Arms are both..
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1991 - Honda Civic | L | 1493 | Rear Lower | 4 Cyl 1.5L | Base | - |
- Control Arm
- Minus 2 Degree To 5 Degree Camber Premium OE Replacement
- MOOG RK100068 Control Arm
- Product Attributes:
- Adjustable: Yes
- Length: 8.000
- Bushing Material: Rubber
- Bushings Included: Yes
-
Features:
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
13100068, 264-3013, 274-3111, 521-131, CA30234, CMS601049, CMS601153, MS601049
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1991 - Honda Civic | Rear Upper |
- Extreme Duty Control Arm;
- Extreme Duty Control Arm
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Improves Ride And Handling
- Improves Driveline Geometry
- Constructed Of 2 in x 1/4 in Wall 4130 Chromoly
- Features Super Flex Joints
- These Arms Are Used In Conjunction With The Re4020 Arms To Convert The Factory Four Link To A Radius Arm Design. This Change Improves Ride, Handling, And Driveline Geometry In Your Lifted Jeep. This Arm Is Constructed Out Of 2 in. X 1/4 in. Wall 4130 Chromoly And Is Nearly Bulletproof. The Arms Are Adjustable And Feature Our Super-Flex Joints For Increased Axle Articulation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1991 - Jeep Cherokee | Front Right Lower |
- Extreme Duty Control Arm;
- Extreme Duty Control Arm
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Improves Ride And Handling
- Improves Driveline Geometry
- Constructed Of 2 in x 1/4 in Wall 4130 Chromoly
- Features Super Flex Joints
- These Arms Are Used In Conjunction With The Re4020 Arms To Convert The Factory Four Link To A Radius Arm Design. This Change Improves Ride, Handling, And Driveline Geometry In Your Lifted Jeep. This Arm Is Constructed Out Of 2 in. X 1/4 in. Wall 4130 Chromoly And Is Nearly Bulletproof. The Arms Are Adjustable And Feature Our Super-Flex Joints For Increased Axle Articulation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1991 - Jeep Cherokee | Front Left Lower |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1991 - Jeep Comanche | Front Upper |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1991 - Subaru Legacy | Front Left |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1991 - INFINITI G20 | Front Right Upper |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1991 - GMC K2500 | Front Right Upper |
Showing 1 - 10 of 217 products
Loading...