2018 Jeep Suspension Control Arm Parts
Choose a Model for your 2018 Jeep
Image
Product
Price
- CONTROL ARMS
- ALL 8 ARMS ARE FULLY ADJUSTABLE FOR WHEEL BASE ADJUSTMENT, DRIVE LINE CORRECTION & CASTER CORRECTION THESE ARMS ALLOW FOR MORE SUSPENSION FLEX WHEN OFFROADING REBUILDABLE ENDS FEATURE A CHROMOLY HOUSING, URETHANE BUSHINGS, A SPHERICAL CENTER SUPPORT & GREASE FITTINGS FOR EASY LUBING COMES W/ FACTORY RUBBER BUSHINGS AT FIXED END THAT DO NOT REQUIRE SERVICING & ALLOW FOR ROAD NOISE REDUCTION MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- ADJUSTABLE CONTROL ARM KIT (8 PCS)
- MAXTRAC SUSPENSION'S PART# 859700-8 IS A COMPLETE 8 PIECE SET OF ADJUSTABLE CONTROL ARMS FABRICATED FROM STEEL & POWDER COATED GREY
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Jeep Wrangler JK |
- CONTROL ARMS
- ADJUSTABLE LENGTH W/ 5" OF THREAD REBUILDABLE CHROMOLY ROD END W/ POLY URITHANE BUSHINGS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- JEEP JL FRONT LOWER CONTROL ARMS
- MAXTRAC SUSPENSION'S PART# 859802 IS A PAIR OF FRONT LOWER ADJUSTABLE CONTROL ARMS FABRICATED FROM 3/8" STEEL & POWDER COATED GREY
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Jeep Wrangler |
- Black Kit Performance Upgrade Unit(s) with Front Raised Height 0 IN to 4.0 IN
- Rancho Suspension Control Arm
This Part Fits the Following OEM/Substitute Numbers:
52059979AC, 52059979AD, 52059979AE, 52059979AF
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2018 - Jeep Wrangler JK | Front Lower | 4WD |
- Includes Bushings and Ball Joint w/o SRT Package
- Control Arm; Includes Bushings and Ball Joint;
- Control Arm
-
Features:
- Control Arm
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2018 - Jeep Grand Cherokee | Front Left | Altitude |
- Includes Bushing and Ball Joint w/o SRT Package~w/o Trailhawk Package
- Control Arm; Includes Bushing and Ball Joint;
- Control Arm
-
Features:
- Control Arm
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2018 - Jeep Grand Cherokee | Front Right | Summit |
- Includes 1 Bushing At Frame Side
- Control Arm; Includes 1 Bushing At Frame Side;
- Control Arm
-
Features:
- Control Arm
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2018 - Jeep Wrangler JK | Front Left Upper | Rubicon |
- Includes 1 Bushing At Frame Side
- Control Arm; Includes 1 Bushing At Frame Side;
- Control Arm
-
Features:
- Control Arm
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2018 - Jeep Wrangler JK | Front Right Upper | Sahara |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- OE Replacement
- Rear Lower Rearward - Spring Link
- Includes Bushings
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Jeep Cherokee |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Jeep Grand Cherokee | Rear Right Lower |
- Control Arm
- Premium OE Replacement
- MOOG RK621823 Control Arm
-
Features:
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2606429, 507-1874, 52059979AC, 52059979AD, 52059979AE, 52059979AF, 521-117, CA96085, CMS25183, FA3423, MS25183
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Jeep Wrangler JK | Front Lower |
Showing 1 - 10 of 35 products
Loading...