Image
Product
Price
- B6 - Suspension Strut Assembly
- With Off-Road Suspension With Jeep Active Drive II (4WD)
- Twintube Strut Assembly
- B6
- Product Attributes:
- Boot Included: No
- Internal Design: Twintube
- Lower Mount Type: Base Cup
- Upper Mount Type: Stem
- Reservoir: No
- Segment: Tuning
- Adjustable Damping: Non-adjustable
- Spring Seat Included: Yes - Fixed
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- Uses OEM springs and mounting hardware
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Specific tuning for stock height vehicles
- Bilstein B6 shock absorbers and struts are the ideal choice for improving the performance of any vehicle. Bilstein B6 shock absorbers and struts utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions to provide consistent fade free performance. All B6 shock absorbers and struts are tuned for each specific application to assure optimal performance is achieved. Bilstein B6 shock absorbers and struts offer a significant improvement in ride quality, handling, and comfort.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2023 - Jeep Cherokee | Front Left | Altitude Lux | AWD |
- B8 TerraSport - Suspension Strut Assembly
- Provides 1.5" Front Lift
- Twintube Strut Assembly
- B8 TerraSport
- Product Attributes:
- Boot Included: No
- Internal Design: Twintube
- Lower Mount Type: Bracket
- Upper Mount Type: Stem
- Segment: Tuning
- Spring Seat Included: Yes - Fixed
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- No spacers required. Shocks lift vehicle 1-2 inches, depending on application
- Utilizes vehicle‘s factory coil springs and OEM mounting locations, for a direct fit, easy installation
- Direct fit shocks are designed to increase ground clearance and improve off-road capabilities
- Bilstein B8 TerraSport direct fit shocks are designed to increase ground clearance and improve off-road capability for CUVs. Enthusiasts will gain 1-2” of lift depending on application, allowing them to safely navigate back-country terrain, while enhancing day-to-day ride quality. Like all Bilstein products, B8 TerraSport shocks have been tested and tuned for each application, and always with the end user in mind. Whether you’re traversing your way up a snow packed summit, or loaded up with gear and looking for that epic camping spot, B8 TerraSport gives you the confidence to push further when the pavement ends, and the durability to get you back home.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Toyota RAV4 | Front Left | Adventure |
- B4 OE Replacement - Suspension Strut Assembly
- Twintube Strut Assembly
- B4 OE Replacement
- Product Attributes:
- Boot Included: No
- Internal Design: Twintube
- Lower Mount Type: Bracket
- Upper Mount Type: Stem
- Segment: Spare Parts
- Spring Seat Included: Yes - Fixed
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- Restores original driving comfort, handling and safety
- High OE quality
- High power reserves for maximum safety
- Bilstein B4 OE Replacement dampers are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
This Part Fits the Following OEM/Substitute Numbers:
NZ6Z 18124-G, NZ6Z 18124-H, NZ6Z 18124-J, NZ6Z18124G, NZ6Z18124H, NZ6Z18124J
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Ford Maverick | Front Left | XL |
- B8 TerraSport - Suspension Strut Assembly
- Provides 1.5" Front Lift
- Twintube Strut Assembly
- B8 TerraSport
- Product Attributes:
- Boot Included: No
- Internal Design: Twintube
- Lower Mount Type: Bracket
- Upper Mount Type: Stem
- Segment: Tuning
- Spring Seat Included: Yes - Fixed
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- Utilizes vehicle‘s factory coil springs and OEM mounting locations, for a direct fit, easy installation
- Direct fit shocks are designed to increase ground clearance and improve off-road capabilities
- No spacers required. Shocks lift vehicle 1-2 inches, depending on application
- Bilstein B8 TerraSport direct fit shocks are designed to increase ground clearance and improve off-road capability for CUVs. Enthusiasts will gain 1-2” of lift depending on application, allowing them to safely navigate back-country terrain, while enhancing day-to-day ride quality. Like all Bilstein products, B8 TerraSport shocks have been tested and tuned for each application, and always with the end user in mind. Whether you’re traversing your way up a snow packed summit, or loaded up with gear and looking for that epic camping spot, B8 TerraSport gives you the confidence to push further when the pavement ends, and the durability to get you back home.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Toyota RAV4 | Front Right | Hybrid XSE |
- B6 Performance - Suspension Strut Assembly
- Twintube Strut Assembly
- B6 Performance
- Product Attributes:
- Boot Included: No
- Internal Design: Twintube
- Lower Mount Type: Clevis
- Upper Mount Type: Stem
- Segment: Tuning
- Spring Seat Included: Yes - Fixed
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- Improved safety and performance without the requirement of new springs (use of series spring possible)
- Bilstein gas-pressure technology
- Optimum grip and enhanced lane stability in day to day and extreme situations
- Bilstein B6 Performance dampers are a performance upgrade to OE dampers designed to be paired with the OE factory spring. These dampers offer application specific valve settings to bring out the best handling performance of a vehicle. Each damper is rigorously tested for quality that meets or exceeds OE standards. B6 Performance dampers will provide improved safety and handling performance with the added benefit of world-famous Bilstein quality.
This Part Fits the Following OEM/Substitute Numbers:
23420870, 23420872, 23509097, 23509099, 85115459, 85115461, 85115465, 85115467
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Chevrolet Camaro | Front Right | LT |
- B6 Performance - Suspension Strut Assembly
- Twintube Strut Assembly
- B6 Performance
- Product Attributes:
- Boot Included: No
- Internal Design: Twintube
- Lower Mount Type: Base Cup
- Upper Mount Type: Stem
- Reservoir: No
- Segment: Tuning
- Adjustable Damping: Non-adjustable
- Spring Seat Included: Yes - Fixed
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- Optimum grip and enhanced lane stability in day to day and extreme situations
- Improved safety and performance without the requirement of new springs (use of series spring possible)
- Bilstein gas-pressure technology
- Bilstein B6 Performance dampers are a performance upgrade to OE dampers designed to be paired with the OE factory spring. These dampers offer application specific valve settings to bring out the best handling performance of a vehicle. Each damper is rigorously tested for quality that meets or exceeds OE standards. B6 Performance dampers will provide improved safety and handling performance with the added benefit of world-famous Bilstein quality.
This Part Fits the Following OEM/Substitute Numbers:
31476356, 31658722, 32221638, 32221640, 32221642, 32221644, 32221646, 32246637, 32246639, 32246641, 32246643, 32246645, 32246647
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Volvo XC40 Recharge | Front Left | Plus |
- B6 Camper Advanced (Dampmatic) - Suspension Strut Assembly
- Twintube Strut Assembly
- B6 Camper Advanced (DampMatic)
- Product Attributes:
- Boot Included: No
- Internal Design: Twintube
- Lower Mount Type: Bracket
- Upper Mount Type: Stem
- Segment: Tuning
- Spring Seat Included: Yes - Fixed
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- More engaging driving experience through high traction and precise handling
- With patented BILSTEIN DampMatic technology and individually tuned to two characteristic curves in the BILSTEIN road test
- Reduction of driving noise due to better damping on roads with changing road surfaces
- Bilstein B6 Camper shock absorbers and struts are the ideal choice for improving the performance of your camper van. Each damper utilizes a unique, velocity sensitive, digressive piston which reacts to changing road conditions to provide consistent fade free performance. All B6 Camper shock absorbers and struts are tuned for each specific application and increased vehicle weight to assure optimal performance is achieved.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
906 320 06 33, 906 320 07 33, 906 320 09 33, 906 320 10 33, 906 320 13 33, 906 320 62 30, 906 320 63 30, 906 320 70 30, 906 320 74 30, 906 320 76 30, 906 320 80 30, 907 320 12 02, 907 320 13 02, 907 320 53 01
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2023 - Mercedes-Benz Sprinter 3500XD | Front | Base | RWD |
- B6 - Suspension Strut Assembly
- Twintube Strut Assembly
- B6
- Product Attributes:
- Boot Included: No
- Internal Design: Twintube
- Lower Mount Type: Base Cup
- Upper Mount Type: Stem
- Reservoir: No
- Segment: Tuning
- Adjustable Damping: Non-adjustable
- Spring Seat Included: Yes - Fixed
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- Uses OEM springs and mounting hardware
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Specific tuning for stock height vehicles
- Bilstein B6 shock absorbers and struts are the ideal choice for improving the performance of any vehicle. Bilstein B6 shock absorbers and struts utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions to provide consistent fade free performance. All B6 shock absorbers and struts are tuned for each specific application to assure optimal performance is achieved. Bilstein B6 shock absorbers and struts offer a significant improvement in ride quality, handling, and comfort.
This Part Fits the Following OEM/Substitute Numbers:
5274 531AE, 5274 531AF, 5274 533AE, 5274 533AF, 5274531AE, 5274531AF, 5274533AE, 5274533AF, 6838 1243AC, 6838 1243AD
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Jeep Cherokee | Front Left | Trailhawk |
- B8 TerraSport - Suspension Strut Assembly
- Provides 1" Front Lift
- Twintube Strut Assembly
- B8 TerraSport
- Product Attributes:
- Boot Included: No
- Internal Design: Twintube
- Lower Mount Type: Bracket
- Upper Mount Type: Stem
- Reservoir: No
- Segment: Tuning
- Adjustable Damping: Non-adjustable
- Spring Seat Included: Yes - Fixed
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- No spacers required. Shocks lift vehicle 1-2 inches, depending on application
- Utilizes vehicle‘s factory coil springs and OEM mounting locations, for a direct fit, easy installation
- Direct fit shocks are designed to increase ground clearance and improve off-road capabilities
- Bilstein B8 TerraSport direct fit shocks are designed to increase ground clearance and improve off-road capability for CUVs. Enthusiasts will gain 1-2” of lift depending on application, allowing them to safely navigate back-country terrain, while enhancing day-to-day ride quality. Like all Bilstein products, B8 TerraSport shocks have been tested and tuned for each application, and always with the end user in mind. Whether you’re traversing your way up a snow packed summit, or loaded up with gear and looking for that epic camping spot, B8 TerraSport gives you the confidence to push further when the pavement ends, and the durability to get you back home.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2023 - Jeep Renegade | Front Right | Limited | AWD |
- B6 Camper - Suspension Strut Assembly
- Twintube Strut Assembly
- B6 Camper
- Product Attributes:
- Boot Included: No
- Internal Design: Twintube
- Lower Mount Type: Bracket
- Upper Mount Type: Stem
- Reservoir: No
- Segment: Tuning
- Adjustable Damping: Non-adjustable
- Spring Seat Included: Yes - Fixed
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- More engaging driving experience through high traction and precise handling
- No additional spring change necessary
- Safety plus in crosswinds and in curves due to optimum road grip
- Bilstein B6 Camper shock absorbers and struts are the ideal choice for improving the performance of your camper van. Each damper utilizes a unique, velocity sensitive, digressive piston which reacts to changing road conditions to provide consistent fade free performance. All B6 Camper shock absorbers and struts are tuned for each specific application and increased vehicle weight to assure optimal performance is achieved.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
906 320 11 33, 906 320 14 33, 906 320 14 33 64
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2023 - Mercedes-Benz Sprinter 3500XD | Front | Base | AWD |
Showing 1 - 10 of 101 products
Loading...