Image
Product
Price
- Wheel Bearing
- Install Identical to OE
- National 510092 Wheel Bearing
- Product Attributes:
- Design: Double Row Angular Contact
- Width (Inch): 1.732
- Outer Race Outside Diameter (Inch): 3.583
- Outer Race Outside Diameter (MM): 91.000
- Inner Race Bore (Inch): 2.008
- Inner Race Width (MM): 44.000
- Footnote: Gen1
- Inner Race Width (Inch): 1.732
- Outer Race Width (Inch): 1.732
- Outer Race Width (MM): 44.000
- Bore (Inch): 2.008
- Inner Race Bore (MM): 51.000
- Outside Diameter (Inch): 3.583
- Part Description: Wheel Bearing
- Designed to meet or exceed OE quality, premium-quality bearings from National® are manufactured to exacting standards to deliver lasting performance and extended bearing life.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
051-4187, 44300-SJK-J01, 44300-STK-951, FW97, WB000011, WB000012
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Acura RDX | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- This bearing is equipped with an internal ABS sensor magnet. Care must be taken during installation to insure that the sensor magnet is located on the correct side of the bearing housing. Failure to do so may cause a malfunction in the ABS system. For more info, refer to the appropriate section of your service manual or check with your local dealer.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Acura TSX | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- This bearing is equipped with an internal ABS sensor magnet. Care must be taken during installation on vehicles with ABS to insure that the sensor magnet is located on the correct side of the bearing housing. Failure to do so may cause a malfunction in the ABS system. For more info, refer to the factory service information or check with your local dealer.
- Front
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Acura RDX | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Acura RDX | Front |
- KUGEL bearing features application-specific designs to improve performance, extend service life, keep water and dirt out and resist corrosion. KUGEL hub assemblies are engineered and designed for hassle-free installation. Our design enhancements extend product life and simplify installation to exceed OE standard.
- Kugel With C-Clip
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Inner rings are made of AISI 52100 alloy (high carbon) steel, low-alloy chromium steel, which meets ASTM International quality standards
- Core made of high tensile, heat-treatable AISI 1065 high-carbon steel
- Assembly is precision processed and pre-coated with anti-corrosion lubricant, it not only makes lubricating the bearings easy, but also helps prevent corrosion of the hub
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
510095, FW26, H510095, WB000019
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Acura TSX | Front |
- KUGEL bearing features application-specific designs to improve performance, extend service life, keep water and dirt out and resist corrosion. KUGEL hub assemblies are engineered and designed for hassle-free installation. Our design enhancements extend product life and simplify installation to exceed OE standard.
- Kugel With C-Clip
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Inner rings are made of AISI 52100 alloy (high carbon) steel, low-alloy chromium steel, which meets ASTM International quality standards
- Core made of high tensile, heat-treatable AISI 1065 high-carbon steel
- Assembly is precision processed and pre-coated with anti-corrosion lubricant, it not only makes lubricating the bearings easy, but also helps prevent corrosion of the hub
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
510073, 510098, 510111, FW48, H510073, WB000056
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Acura CSX | Front |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive Drill and Slot design for left or right installation
- SIM Exclusive low-resin Semi-Metallic formula eliminates brake fade and glazing for optimal braking power
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Drilled Slotted DS-One Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic SIM Brake Pad Set (Hardware Included) + 2x Re
- Kit variations : KBB-113122 KBB-113141 KBB-113154 KBB-113206 KBB-113233 KBB-113250 KBB-115455 KBB-115606 KBB-117287 KBB-117505 KBB-117861
This Part Fits the Following OEM/Substitute Numbers:
1103, 120.40074, 120.40075, 121.40074, 121.40075, 1584, 2164689, 2164690, 248880738, 248881892, 2488821294, 31538, 31539, 48880738, 48881892, 488821294, 510095, 512391...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2011 - Acura TL | Front and Rear | FWD |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive Drill and Slot design for left or right installation
- Exclusive high-density ceramic formula for optimal braking power and quietness. Our formula provides unmatched braking power in hot or cold weather with optimal pad life
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Drilled Slotted DS-One Disc Brake Rotor (Both Side) + 1x Front Ceramic TEC Brake Pad Set (Hardware Included)
- Kit variations : KBB-100268 KBB-101467 KBB-101769 KBB-102076 KBB-102408 KBB-102762 KBB-115502 KBB-115577 KBB-122914 KBB-122932 KBB-122943
This Part Fits the Following OEM/Substitute Numbers:
120.40046, 121.40046, 125674, 1506, 1506A, 2164608, 24886795, 248880666, 31275, 31519, 4886795, 48880666, 510095, 74886795, 748880666, 7656, 8392, 96795...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Acura TSX | Front |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- PPF USA-engineered low-resin Semi-Metallic formula eliminates brake fade and glazing for optimal braking power
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Top Quality Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic Positive Plus Brake Pad Set (Hardware Included) + 2x Rear Top Q
- Kit variations : KBB-113141 KBB-113154 KBB-113206 KBB-113233 KBB-113250 KBB-115455 KBB-115533 KBB-115606 KBB-117287 KBB-117505 KBB-117861
This Part Fits the Following OEM/Substitute Numbers:
1103, 120.40074, 120.40075, 121.40074, 121.40075, 1584, 248880738, 248881892, 2488821294, 31538, 31539, 48880738, 48881892, 488821294, 510095, 512391, 748880738, 748881892...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2011 - Acura TL | Front and Rear | FWD |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive Drill and Slot design for left or right installation
- PPF USA-engineered low-resin Semi-Metallic formula eliminates brake fade and glazing for optimal braking power
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Drilled Slotted DS-One Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic Positive Plus Brake Pad Set (Hardware Include
- Kit variations : KBB-106288 KBB-106693 KBB-107093 KBB-107753 KBB-108105 KBB-108448 KBB-115531 KBB-115604 KBB-122903 KBB-122910 KBB-122923
This Part Fits the Following OEM/Substitute Numbers:
120.40046, 120.40068, 121.40046, 121.40068, 125674, 1451, 1506, 1506A, 2164608, 2164654, 24886795, 248880577, 248880666, 31275, 31479, 31519, 4886795, 48880577...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Acura TSX | Front and Rear |
Showing 1 - 10 of 93 products
Loading...