2012 Land Rover Wheel Bearing Parts
Choose a Model for your 2012 Land Rover
Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- This bearing is equipped with an internal ABS sensor magnet. Care must be taken during installation to insure that the sensor magnet is located on the correct side of the bearing housing. Failure to do so may cause a malfunction in the ABS system. For more info, refer to the appropriate section of your service manual or check with your local dealer.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Land Rover Range Rover Evoque | Rear |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Rear
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Land Rover Range Rover Evoque | Rear |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Land Rover LR2 | Rear |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- -w/Snap Ring & Nut
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Land Rover Range Rover Sport | Rear |
- KUGEL bearing features application-specific designs to improve performance, extend service life, keep water and dirt out and resist corrosion. KUGEL hub assemblies are engineered and designed for hassle-free installation. Our design enhancements extend product life and simplify installation to exceed OE standard.
- Kugel With C-Clip
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Inner rings are made of AISI 52100 alloy (high carbon) steel, low-alloy chromium steel, which meets ASTM International quality standards
- Core made of high tensile, heat-treatable AISI 1065 high-carbon steel
- Assembly is precision processed and pre-coated with anti-corrosion lubricant, it not only makes lubricating the bearings easy, but also helps prevent corrosion of the hub
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
510073, 510098, 510111, FW48, H510073, WB000056
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Land Rover Range Rover Evoque | Rear |
- KUGEL bearing features application-specific designs to improve performance, extend service life, keep water and dirt out and resist corrosion. KUGEL hub assemblies are engineered and designed for hassle-free installation. Our design enhancements extend product life and simplify installation to exceed OE standard.
- Kugel With C-Clip
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Inner rings are made of AISI 52100 alloy (high carbon) steel, low-alloy chromium steel, which meets ASTM International quality standards
- Core made of high tensile, heat-treatable AISI 1065 high-carbon steel
- Assembly is precision processed and pre-coated with anti-corrosion lubricant, it not only makes lubricating the bearings easy, but also helps prevent corrosion of the hub
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
510082, FW33, H510082
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Land Rover Range Rover | Rear |
- KUGEL bearing features application-specific designs to improve performance, extend service life, keep water and dirt out and resist corrosion. KUGEL hub assemblies are engineered and designed for hassle-free installation. Our design enhancements extend product life and simplify installation to exceed OE standard.
- Kugel With C-Clip
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Inner rings are made of AISI 52100 alloy (high carbon) steel, low-alloy chromium steel, which meets ASTM International quality standards
- Core made of high tensile, heat-treatable AISI 1065 high-carbon steel
- Assembly is precision processed and pre-coated with anti-corrosion lubricant, it not only makes lubricating the bearings easy, but also helps prevent corrosion of the hub
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Land Rover Range Rover Evoque | Front |
- KUGEL bearing features application-specific designs to improve performance, extend service life, keep water and dirt out and resist corrosion. KUGEL hub assemblies are engineered and designed for hassle-free installation. Our design enhancements extend product life and simplify installation to exceed OE standard.
- Kugel With C-Clip
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Inner rings are made of AISI 52100 alloy (high carbon) steel, low-alloy chromium steel, which meets ASTM International quality standards
- Core made of high tensile, heat-treatable AISI 1065 high-carbon steel
- Assembly is precision processed and pre-coated with anti-corrosion lubricant, it not only makes lubricating the bearings easy, but also helps prevent corrosion of the hub
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
510087, FW44, H510087
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Land Rover LR2 | Rear |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive Drill and Slot design for left or right installation
- Exclusive high-density ceramic formula for optimal braking power and quietness. Our formula provides unmatched braking power in hot or cold weather with optimal pad life
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Drilled Slotted DS-One Disc Brake Rotor (Both Side) + 1x Front Ceramic TEC Brake Pad Set
- Kit variations : KBB-100200 KBB-101409 KBB-101713 KBB-102013 KBB-102345 KBB-102701 KBB-115496 KBB-115571 KBB-117658 KBB-118186 KBB-118852
This Part Fits the Following OEM/Substitute Numbers:
120.39040, 121.39040, 1306, 2164685, 248880725, 34413, 48880725, 510082, 748880725, 8421, 900854, 980725, AD8421, AR45025, BD180354, BD180354E, BR900854, D1306...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Land Rover Range Rover Evoque | Front |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive Drill and Slot design for left or right installation
- PPF USA-engineered low-resin Semi-Metallic formula eliminates brake fade and glazing for optimal braking power
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Rear Kugel Wheel Bearing (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Drilled Slotted DS-One Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic Positive Plus Brake Pad Set + 2x Rear Coated Drilled Slotted D
- Kit variations : KBB-106467 KBB-106870 KBB-107282 KBB-107924 KBB-108270 KBB-108624 KBB-115592 KBB-115672 KBB-117380 KBB-117770 KBB-118478
This Part Fits the Following OEM/Substitute Numbers:
120.22023, 120.39040, 121.22023, 121.39040, 1306, 1307, 1307A, 2164685, 2164726, 248880725, 248881694, 34413, 34507, 48880725, 48881694, 510073, 510082, 510098...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Land Rover Range Rover Evoque | Front and Rear |
Showing 1 - 10 of 50 products
Loading...