Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Acura RLX | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- This bearing is equipped with an internal ABS sensor magnet. Care must be taken during installation to insure that the sensor magnet is located on the correct side of the bearing housing. Failure to do so may cause a malfunction in the ABS system. For more info, refer to the appropriate section of your service manual or check with your local dealer.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Acura ILX | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- This bearing is equipped with an internal ABS sensor magnet. Care must be taken during installation on vehicles with ABS to insure that the sensor magnet is located on the correct side of the bearing housing. Failure to do so may cause a malfunction in the ABS system. For more info, refer to the factory service information or check with your local dealer.
- Front
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Acura RLX | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Acura RDX | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Rear
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Acura ILX | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- This bearing is equipped with an internal ABS sensor magnet. Care must be taken during installation to insure that the sensor magnet is located on the correct side of the bearing housing. Failure to do so may cause a malfunction in the ABS system. For more info, refer to the appropriate section of your repair manual or check with your local dealer.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Acura TLX | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Acura RLX | Front |
- Front Wheel Bearing And Tie Rod End Kit For Honda Accord Acura TLX K7T-100155
- Transit Auto Front Wheel Bearing And Tie Rod End Kit For Honda Accord Acura TLX - Left Right Side (Driver Passenger) K7T-100155
- Transit Auto
- Product Attributes:
- WebNameEbay4: For Honda Accord Acura Tlx Front Wheel Bearing And Tie Rod End Kit
- ComponentsSummaryRegularWithBrands: 2x Kugel Wheel Bearing, 2x Tor Steering Tie Rod End
- ComponentsSummaryShort: 2x Wheel Bearing 2x Tie Rod End
- ComponentsSummaryLongWithBrands: 2x Front Kugel Wheel Bearing (both Side) + 2x Front Outer Tor Steering Tie Rod End (both Side)
- WebNamePlain: Transit Auto Front Wheel Bearing And Tie Rod End Kit K7t-100155
- ComponentsSummaryShortWithBrands: 2x Kugel Wheel Bearing 2x Tor Tie Rod End
- NumberOfPieces: 4
- ComponentsSummaryLong: 2x Front Wheel Bearing (both Side) + 2x Front Outer Steering Tie Rod End (both Side)
- WebNameLong: Transit Auto Front Wheel Bearing And Tie Rod End Kit For Honda Accord Acura Tlx - Left Right Side (driver Passenger) K7t-100155
- WebNameShort: Front Wheel Bearing And Tie Rod End Kit For Honda Accord Acura Tlx K7t-100155
- ComponentsSummaryRegular: 2x Wheel Bearing, 2x Steering Tie Rod End
- WebNameRegular: Transit Auto Front Wheel Bearing And Tie Rod End Kit For Honda Accord Acura Tlx - Left Right Side (driver Passenger) K7t-100155
- WebNameEbay2: [front] Wheel Bearing And Tie Rod End Kit For Honda Accord Acura Tlx
- WebNameEbay3: Wheel Bearing And Tie Rod End Front Kit For Honda Accord Acura Tlx
- WebNameEbay: Front Wheel Bearing And Tie Rod End Kit For Honda Accord Acura Tlx K7t-100155
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the tie rod
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Inner rings are made of AISI 52100 alloy (high carbon) steel, low-alloy chromium steel, which meets ASTM International quality standards
- Kit Includes: 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Outer TOR Steering Tie Rod End (Both Side)
- Kit Variations: K77-102555 K7T-108060
- Part Reference Numbers : WE60389 WH510118 MB60313 510118 FW202 WB000072 WB000078 TRB-510118 BES801001 TO59271XL 544-191 TO59271PR TO59271 GS60636 MS60636 ES801001 2693959 53560-T2A-A01 TES801001 BES801000 TO59272XL 544-192 TO59272PR TO5927
- Transit Auto offers the most comprehensive and highest-quality replacement kits on the market. Thanks to our cutting-edge AI, in-house product team, and proprietary fitment data, we are able to build and deliver the most accurate kits on the market. All our kits include the highest-quality parts on the market, sourced directly by Transit and its sub-brands. Backed by over 50 years of experience and with in-house quality assurance, every customer can purchase and drive with peace of mind. Transit Auto is the largest kit supplier, with over 100,000 kits, and the only supplier to provide the true picture of the kits and the complete buyer's guide. Whether you are a Do-It-Yourself enthusiast, a Mechanic, or a Garage, we have the right kit for you.
This Part Fits the Following OEM/Substitute Numbers:
510118, 539-361, ES801000, ES801001, FW202, MB60313, MS60635, MS60636, N/A, TES801000, TES801001, TRB-510118, WB000072, WB000078
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Acura TLX | L | 2356 | Front | 4 Cyl 2.4L | 144 |
- Front Wheel Bearing And Link Kit For Honda Civic Acura ILX K77-100551
- Transit Auto Front Wheel Bearing And Link Kit For Honda Civic Acura ILX - Left Right Side (Driver Passenger) K77-100551
- Transit Auto
- Product Attributes:
- WebNameEbay4: For Honda Civic Acura Ilx Front Wheel Bearing And Link Kit
- ComponentsSummaryRegularWithBrands: 2x Kugel Wheel Bearing, 2x Top Quality Suspension Stabilizer Bar Link Kit
- ComponentsSummaryShort: 2x Wheel Bearing 2x Link Kit
- ComponentsSummaryLongWithBrands: 2x Front Kugel Wheel Bearing (both Side) + 2x Front Top Quality Suspension Stabilizer Bar Link Kit (both Side)
- WebNamePlain: Transit Auto Front Wheel Bearing And Link Kit K77-100551
- ComponentsSummaryShortWithBrands: 2x Kugel Wheel Bearing 2x Tq Link Kit
- NumberOfPieces: 4
- ComponentsSummaryLong: 2x Front Wheel Bearing (both Side) + 2x Front Suspension Stabilizer Bar Link Kit (both Side)
- WebNameLong: Transit Auto Front Wheel Bearing And Link Kit For Honda Civic Acura Ilx - Left Right Side (driver Passenger) K77-100551
- WebNameShort: Front Wheel Bearing And Link Kit For Honda Civic Acura Ilx K77-100551
- ComponentsSummaryRegular: 2x Wheel Bearing, 2x Suspension Stabilizer Bar Link Kit
- WebNameRegular: Transit Auto Front Wheel Bearing And Link Kit For Honda Civic Acura Ilx - Left Right Side (driver Passenger) K77-100551
- WebNameEbay2: [front] Wheel Bearing And Link Kit For Honda Civic Acura Ilx
- WebNameEbay3: Wheel Bearing And Link Front Kit For Honda Civic Acura Ilx
- WebNameEbay: Front Wheel Bearing And Link Kit For Honda Civic Acura Ilx K77-100551
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- TQ USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- TQ steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Inner rings are made of AISI 52100 alloy (high carbon) steel, low-alloy chromium steel, which meets ASTM International quality standards
- Kit Includes: 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Top Quality Suspension Stabilizer Bar Link Kit (Both Side)
- Kit Variations: K77-100552 K7T-100859 K7T-101029
- Part Reference Numbers : WE60382 WH510073 WH510098 WH510111 481073 H510073 510111 510073 510098 FW48 WB000013 WB000056 WB000060 TRB-510073 SL59071PR SL59071XL SL59071 GS608104 MS608104 K750605 2653243 TK750605 SL59072PR SL59072XL SL59072 G
- Transit Auto offers the most comprehensive and highest-quality replacement kits on the market. Thanks to our cutting-edge AI, in-house product team, and proprietary fitment data, we are able to build and deliver the most accurate kits on the market. All our kits include the highest-quality parts on the market, sourced directly by Transit and its sub-brands. Backed by over 50 years of experience and with in-house quality assurance, every customer can purchase and drive with peace of mind. Transit Auto is the largest kit supplier, with over 100,000 kits, and the only supplier to provide the true picture of the kits and the complete buyer's guide. Whether you are a Do-It-Yourself enthusiast, a Mechanic, or a Garage, we have the right kit for you.
This Part Fits the Following OEM/Substitute Numbers:
265-3243, 265-3244, 2653243, 2653244, 510073, 510098, 545-1959, 545-1960, FW48, H510073, K750604, K750605, MS608104, MS608105, SL59071, SL59072, TK750604, TK750605...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Acura ILX | Front |
- Front Wheel Bearing And Tie Rod End Kit For Honda Civic Acura ILX K77-100552
- Transit Auto Front Wheel Bearing And Tie Rod End Kit For Honda Civic Acura ILX - Left Right Side (Driver Passenger) K77-100552
- Transit Auto
- Product Attributes:
- WebNameEbay4: For Honda Civic Acura Ilx Front Wheel Bearing And Tie Rod End Kit
- ComponentsSummaryRegularWithBrands: 2x Kugel Wheel Bearing, 2x Top Quality Steering Tie Rod End
- ComponentsSummaryShort: 2x Wheel Bearing 2x Tie Rod End
- ComponentsSummaryLongWithBrands: 2x Front Kugel Wheel Bearing (both Side) + 2x Front Outer Top Quality Steering Tie Rod End (both Side)
- WebNamePlain: Transit Auto Front Wheel Bearing And Tie Rod End Kit K77-100552
- ComponentsSummaryShortWithBrands: 2x Kugel Wheel Bearing 2x Tq Tie Rod End
- NumberOfPieces: 4
- ComponentsSummaryLong: 2x Front Wheel Bearing (both Side) + 2x Front Outer Steering Tie Rod End (both Side)
- WebNameLong: Transit Auto Front Wheel Bearing And Tie Rod End Kit For Honda Civic Acura Ilx - Left Right Side (driver Passenger) K77-100552
- WebNameShort: Front Wheel Bearing And Tie Rod End Kit For Honda Civic Acura Ilx K77-100552
- ComponentsSummaryRegular: 2x Wheel Bearing, 2x Steering Tie Rod End
- WebNameRegular: Transit Auto Front Wheel Bearing And Tie Rod End Kit For Honda Civic Acura Ilx - Left Right Side (driver Passenger) K77-100552
- WebNameEbay2: [front] Wheel Bearing And Tie Rod End Kit For Honda Civic Acura Ilx
- WebNameEbay3: Wheel Bearing And Tie Rod End Front Kit For Honda Civic Acura Ilx
- WebNameEbay: Front Wheel Bearing And Tie Rod End Kit For Honda Civic Acura Ilx K77-100552
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- TQ powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- TQ engineered steel composition results in a stronger component. Our full-ball metal stud provides smooth, consistent, rotational movement resulting in more responsive steering
- Inner rings are made of AISI 52100 alloy (high carbon) steel, low-alloy chromium steel, which meets ASTM International quality standards
- Kit Includes: 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Outer Top Quality Steering Tie Rod End (Both Side)
- Kit Variations: K77-100551 K7T-100859 K7T-101029
- Part Reference Numbers : WE60382 WH510073 WH510098 WH510111 481073 H510073 510111 510073 510098 FW48 WB000013 WB000056 WB000060 TRB-510073 TO59251XL TO59251PR TO59251 GS60651 MS60651 ES800912 2693624 TES800912 TO59252XL TO59252PR TO59252 G
- Transit Auto offers the most comprehensive and highest-quality replacement kits on the market. Thanks to our cutting-edge AI, in-house product team, and proprietary fitment data, we are able to build and deliver the most accurate kits on the market. All our kits include the highest-quality parts on the market, sourced directly by Transit and its sub-brands. Backed by over 50 years of experience and with in-house quality assurance, every customer can purchase and drive with peace of mind. Transit Auto is the largest kit supplier, with over 100,000 kits, and the only supplier to provide the true picture of the kits and the complete buyer's guide. Whether you are a Do-It-Yourself enthusiast, a Mechanic, or a Garage, we have the right kit for you.
This Part Fits the Following OEM/Substitute Numbers:
2693623, 2693624, 510073, 510098, 534-899, 539-173, DS60614, DS60615, ES800912, ES800913, FW48, H510073, MS60651, MS60652, TES800912, TES800913, TO59251, TO59252...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Acura ILX | Front |
Showing 1 - 10 of 121 products
Loading...