Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Straight Connection
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1998 - Audi A4 | Avant |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Original
- Spin-On
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Audi A4 | L | 1781 | 4 Cyl 1.8L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Spin-On
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Audi A4 | L | 1781 | 4 Cyl 1.8L | - |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Audi A4 | L | 1781 | 4 Cyl 1.8L | - |
Additional Fitment Information:
| Vehicle |
|---|
| 1998 - Audi A4 |
- Located by Air Distribution Housing - Center Lower
Additional Fitment Information:
| Vehicle |
|---|
| 1998 - Audi A4 |
- WIX Spin-On Lube Filter
- Original Equipment Part Number 028 115 561 E Factory filled synthetic oil - WIX XP or WIX Premium ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.660
- Burst Pressure: 345
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 30
- Flow Rate: 7-9 Gpm
- Media Material: Enhanced Cellulose
- Class: C
- Anti-Drain Back Valve: Yes
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
This Part Fits the Following OEM/Substitute Numbers:
0 141 758, 0 451 103 028, 0 451 103 185, 0 451 103 185-30N, 0 451 103 253, 0 451 103 256, 0 451 103 346, 0 451 103 347, 0 451 103 906, 0 451 103 906-000, 0 451 104 511, 0 451 203 012, 0 451 203 061, 0 451 203 088, 0 451 203 176, 0 986 452 400, 0 986 AF0 067, 00 03 141 914...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Audi A4 | V | 2771 | Canada | 6 Cyl 2.8L | - |
- Replaces 96421RGS Replaces 1096421 Rotor Diameter 288mm
- Raybestos R-Line
- Product Attributes:
- Overall Height:
- 1.82
- 46.25
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.602
- 15.3
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Directional or Non-Directional Brake Surface: Non-directional
- Harmonize Code: 8708.30.5030
- ABS Tone Ring Included: No
- Center Hole Diameter:
- 2.677
- 68
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 0.977
- 24.8
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 0.906
- 23
- UNSPSC Code: 25171715
- Material: Cast Iron
- Mounting Bolt Hole Circle Diameter:
- 112
- 4.409
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
08.8408.11, 083-2579, 083-2804, 09.5745.10, 117113, 120.33077, 121.33039, 121.33077, 125.33039, 125.33039CRY, 125433, 126.33039CSL, 126.33039CSR, 126.33039SL, 126.33039SR, 126.33077CSL, 126.33077CSR, 126.33077SL...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - Audi A4 | Front |
- Original Equipment Part Number 06A 115 561; Oil Drain Intervals of up to 5000 miles
This Part Fits the Following OEM/Substitute Numbers:
1393, 181, 21393, 21393MP, 31393, 500101509, 51393, 51393XP, 61393, 61393BP, 618-51393, 618-51393MP, 8-51393, 84301, 85393, B0252, B0252MP, CF134...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Audi A4 | L | 1781 | Mexico | 4 Cyl 1.8L | - |
- Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter
- Joint Diameter 3.58 In. Uni-Fit
- Product Attributes:
- Shaft End Inside Diameter: 0.93
- Boot Color:
- Black
- Negro
- Noir
- Split Or Solid Type:
- Solid
- Sólido
- Boot Material:
- Neoprene
- Neopreno
- Rib Quantity: 6
- Contenidos del paquete:
- 1 Fuelle De Junta Homocinética
- 1 Paquetes De Grasa De Junta Homocinética
- 2 Grampas
- Vented Boot:
- No
- Non
- Joint End Inside Diameter: 3.58
-
Features:
- Direct replacement - this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
- Ideal solution - this kit is a reliable replacement for original components that have failed due to wear
- Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
103-2892, 103-8020, 1032145, 1032237, 1032263, 1032265, 1032283, 1032487, 1032491, 1032507, 1032553, 1032620, 1032622, 1032624, 1032653, 1032654, 1032760, 1032762...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - Audi A4 | Front Outer |
Showing 1 - 10 of 29 products
Loading...