Shop By Product Matching "280"
Choose your Engine for your 1998 Ford E-250 Econoline
Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Ford E-250 Econoline | V | - | 8 Cyl 5.4L | 330 |
- For Truck/SUV; 18000 lb. Capacity
- SEC18 ES Premium Winch; For Truck/SUV; 18000 lb. Capacity;
- SEC18 ES Premium Winch
- Product Attributes:
- Voltage: Na
- Rated Single Line Pull (lbs.): 18000
- WARNING CA Proposition 65: No
-
Features:
- Planetary Gear System For Fast Line Speed
- Automatic Load-Holding Brake
- Free Spooling
- Power In And Out
- Low Electric Current
- Waterproof - Fully Submersible
- Mile Marker's most powerful electric w in. to date: the SEC18(es). With 18,000 pounds of pulling and recovery power, this electric w in. can be utilized in many applications from tow trucks to industrial DC; due to its relatively light weight and wide range of accommodations. The SEC18(es) features fast line speed, is completely sealed, and meets SAE J706 Standards.
Additional Fitment Information:
| Vehicle |
|---|
| 1998 - Ford E-250 Econoline |
- For Truck/SUV; 18000 lb. Capacity
- SEC18 ES Premium Winch; For Truck/SUV; 18000 lb. Capacity;
- SEC18 ES Premium Winch
- Product Attributes:
- Voltage: Na
- Rated Single Line Pull (lbs.): 18000
- WARNING CA Proposition 65: No
-
Features:
- Planetary Gear System For Fast Line Speed
- Automatic Load-Holding Brake
- Free Spooling
- Power In And Out
- Low Electric Current
- Waterproof - Fully Submersible
- Mile Marker's most powerful electric w in. to date: the SEC18(es). With 18,000 pounds of pulling and recovery power, this electric w in. can be utilized in many applications from tow trucks to industrial DC; due to its relatively light weight and wide range of accommodations. The SEC18(es) features fast line speed, is completely sealed, and meets SAE J706 Standards.
Additional Fitment Information:
| Vehicle |
|---|
| 1998 - Ford E-250 Econoline |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Ford E-250 Econoline | V | - | 6 Cyl 4.2L | 256 |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 180
- 7.1
- End 1 Inside Diameter:
- .59
- 15
- Material: Epdm
- End 2 Inside Diameter:
- .59
- 15
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10242185, 11025, 12593464, 14155S, 15294018, 19025, 25862087, 63348, 63980, 63981, 71877, 8720904040, 872450C280, 872453D500, A71877, A90897, E92579, G922B48010...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Ford E-250 Econoline | V | - | GAS | 6 Cyl 4.2L | 256 |
- Replacement USCAR Socket with 24in. Wires (Vehicle Side)
- 24 in. Bonded Wire
- CURT 56229 Replacement USCAR Connector Wiring Harness; 24-Inch Wires; 7 Pin Trailer Wiring
- 7-Way USCAR Electrical Connector
-
Features:
- Replaces Damaged Or Missing Uscar Vehicle Harnesses
- Includes 24 In. Color-Coded Bonded Wires For Easy Installation
- Made In USA
- Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailers electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way USCAR replacement harness is designed to replace an existing USCAR plug and supply power for tail lights, turn signals, electric trailer brakes, a battery, reverse lights and brake lights, as well as a ground connection. It features rust-free black plastic construction and comes with color-coded wires and 24 in. of bonded wire for easy splicing into your vehicles wiring system. This 7-way USCAR connector is a female-end socket, specifically designed for the vehicle side of the connection.
Additional Fitment Information:
| Vehicle |
|---|
| 1998 - Ford E-250 Econoline |
- Greaseable Premium Universal Joint
- 1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Premium with Spicer 1350
- MOOG 331 Greaseable Premium Universal Joint for Ford F-150
- Product Attributes:
- Bearing Cap Type: 4 Plain Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.188
- 30.1
- Grade Type: Premium
- Length Axis 1:
- 3.62
- 91.95
- Length Axis 2:
- 3.62
- 91.95
- Greaseable: Yes
- Bearing Cap Axis 1 Diameter:
- 1.188
- 30.2
- U-Joint Identification: 4 Plain Round Bearings
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Lube Fitting Location: Regular Lube Fitting In Cross
- Part Description: Universal Joint
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE -- Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN -- Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR -- Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE -- Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
043710C082, 114-10HD, 114-10HP, 114-578, 114-578R, 114-578U, 11410HD, 11410HP, 114578, 114578R, 114578U, 12471503, 12476231, 12547189, 14067677, 15583283, 15634970, 178...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - Ford E-250 Econoline | At Rear Axle |
- Greaseable Premium Universal Joint
- 1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Premium with Spicer 1350
- MOOG 331 Greaseable Premium Universal Joint for Ford F-150
- Product Attributes:
- Bearing Cap Type: 4 Plain Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.188
- 30.1
- Grade Type: Premium
- Length Axis 1:
- 3.62
- 91.95
- Length Axis 2:
- 3.62
- 91.95
- Greaseable: Yes
- Bearing Cap Axis 1 Diameter:
- 1.188
- 30.2
- U-Joint Identification: 4 Plain Round Bearings
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Lube Fitting Location: Regular Lube Fitting In Cross
- Part Description: Universal Joint
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE -- Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN -- Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR -- Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE -- Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - Ford E-250 Econoline | At Transmission |
- Steering Drag Link
- with Single Rear Wheels (SRW) Functioning as Drag Link Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG DS300003 Steering Drag Link for Ford E-350 Super Duty
- Product Attributes:
- Part Description: Steering Drag Link
-
Features:
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
2696069, 531-617, 626.65806, 627.65805, 740-65400, 8C2Z3304D, D1287, D1287XL, DS1287, DS1287E, DS300003, F2UZ3304B, GDS1287, MDS1287, TA2800
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - Ford E-250 Econoline | Front Right Inner |
- Steering Drag Link
- MOOG DS300003 Steering Drag Link for Ford E-350 Super Duty
- Product Attributes:
- Part Description: Steering Drag Link
-
Features:
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - Ford E-250 Econoline | Front Right Inner |
Showing 1 - 10 of 24 products
Loading...