Image
Product
Price
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Audi A6 |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Audi A6 |
- PEAK OET European Extended Life Violet 50/50 Pre-diluted; 1 Gallon
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Audi A6 |
- Engine Coolant Water Outlet
- Thermostat Housing, O-ring INZI
- Product Attributes:
- Bolts Included: No
- Mounting Hole Quantity: 2
- Outlet Diameter: 1.51 In
- Manufactured to the highest OEM quality standards by an OE Supplier, using proprietary material to stand up to even the most demanding automotive cooling systems. Thermal shock validated and 100% leak tested Meets or exceeds all OEM standards.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Audi A6 | L | 1984 | 4 Cyl 2.0L | 121 |
- Engine Coolant Water Outlet
- Thermostat Housing, O-ring INZI
- Product Attributes:
- Bolts Included: No
- Mounting Hole Quantity: 2
- Outlet Diameter: 1.51 In
- Manufactured to the highest OEM quality standards by an OE Supplier, using proprietary material to stand up to even the most demanding automotive cooling systems. Thermal shock validated and 100% leak tested Meets or exceeds all OEM standards.
This Part Fits the Following OEM/Substitute Numbers:
06H121121K, 06H121121L, 86001, 902-5866, 9CH6001, CH6001, CO34804, NI
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Audi A6 | L | 1984 | 4 Cyl 2.0L | 121 |
- PRO-TEC Cartridge Lube Metal Free Filter
- Original Equipment Part Number 06E 115 562 A; Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Outer Diameter Top: 2.559
- Duty Type: Ld
- Style: Cartridge Lube Metal Free Filt
- Media Material: Cellulose
- Outer Diameter Bottom: 2.559
- Class: A
- Inner Diameter Bottom: 1.244
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
This Part Fits the Following OEM/Substitute Numbers:
27204, 500101521, 5001201247, 57204, 618-57204, 67204, 715, 7204, 84204, AC 6291 E, CF5598, CH10160, CH10160ECO, G7204, L45598, LF629, M5598, M966...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Audi A6 | V | 2773 | Mexico | 6 Cyl 2.8L | - |
- WIX Spin-On Lube Filter
- Factory filled synthetic oil - WIX XP or WIX Premium; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- FlowDirection: Outside-in
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.095
- Duty Type: Ld
- Style: Spin-on Lube Filter
- Media Material: Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 986 AF0 141, 0410834, 06H 115 403, 06H 115 561, 06J 115 403 C, 06J 115 403 J, 06J 115 403 M, 06J 115 403 Q, 06J 115 561 B, 0FE00413, 100 322 0014, 125, 15576, 23.493.00, 27561, 38477, 4297-OS, 5001273912...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 2012 - Audi A6 | L | 1984 | United States | 4 Cyl 2.0L | Turbocharged | 121 |
- WIX Cartridge Lube Metal Free Filter
- Original Equipment Part Number 06E 115 562 A; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Outer Diameter Top: 2.559
- Duty Type: Ld
- Style: Cartridge Lube Metal Free Filt
- Media Material: Cellulose
- Outer Diameter Bottom: 2.559
- Class: A
- Inner Diameter Bottom: 1.244
- WIX Cartridge Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months.
This Part Fits the Following OEM/Substitute Numbers:
0 986 AF0 264, 0 986 AF1 096, 0418189, 06E 115 466, 06E 115 562, 06E 115 562 A, 06E 115 562 C, 06E115486, 1 457 429 268, 10-ECO108, 100 322 0018, 14048/2, 2325, 25.080.00, 26.43.87/10, 27204, 38405, 4008-OX...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Audi A6 | V | 2773 | Mexico | 6 Cyl 2.8L | - |
- Engine Oil Filler Cap
- Product Attributes:
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Vented: No
- Neck Diameter: 1.86 In
- Shell Diameter: 2.70 In
- Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
This Part Fits the Following OEM/Substitute Numbers:
06C103485N, 06C103485P, 079103485A, 14153, 703-1923, 8153, 9MO153, MO153, NI, P8153
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Audi A6 | L | 1984 | 4 Cyl 2.0L | 121 |
- Engine Coolant Reservoir Cap
- Relief pressure 20 lb
- Standard
- Product Attributes:
- Attachment Type: Threaded
- Pressure Release Lever: No
- Vented: Yes
- Pressurized: Yes
- Lever Type: Standard
- Coolant Recovery System: Open & Closed System
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10249, 10249ST, 11249, 12R29, 1678-290344, 17049, 1J0121321B, 31529, 3B0121321, 3C0121321, 54019, 5Q0121321, 703-1391, 7049, 9T49, P7049, T49
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Audi A6 | L | 1984 | 4 Cyl 2.0L | 121 |
Showing 1 - 10 of 234 products
Loading...