Shop By Product Matching "Gates"
Image
Product
Price
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length:
- 23
- 584
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.25
- 32
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
This Part Fits the Following OEM/Substitute Numbers:
1082A64H05, 1123, 120, 1713902, 232430, 25257, 31615, 3792911, 4026082, 5023, 52023, 524, 553, 557, 596973, 645001181, 67919, 681640...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1980 - Nissan 200SX | L | 1952 | Lower | GAS | 4 Cyl 2.0L | - |
- Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length:
- 16
- 406
- End 1 Inside Diameter:
- .625
- 16
- Angle: 90
- Arm Length:
- 102
- 305
- 4
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
This Part Fits the Following OEM/Substitute Numbers:
10007473, 10014215, 10014330, 10014332, 10014672, 1007473, 10157913, 118658, 14052460, 14052473, 14100798, 15555229, 15642507, 1594657, 15963868, 15963869, 16198M, 1641237...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1980 - Nissan 200SX | L | 1952 | Heater To Pipe | GAS | 4 Cyl 2.0L | - |
- Cut to Length, 3"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1980 - Nissan 200SX | L | 1952 | Pipe To Thermostat | GAS | 4 Cyl 2.0L | - |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 38.33
- 973.5
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 37.5
- 953
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0009976892, 0019970592, 0023255090, 0029971092, 002997592, 0069971892, 0069972592, 0200072, 02032189, 0211795013, 021903187, 026903137C, 03-02-308-3, 0307743, 049003137B, 049103137B, 0499031372, 049903137B...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1980 - Nissan 200SX | L | 1952 | Fan and Alternator | GAS | 4 Cyl 2.0L | - |
Additional Fitment Information:
| Vehicle | Prod. Date Range |
|---|---|
| 1980 - Nissan 200SX | Fr:06-00-79 |
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length:
- 17
- 432
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.25
- 32
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
This Part Fits the Following OEM/Substitute Numbers:
1016636, 1040, 1082A64H03, 1118, 114, 1303648, 1602144, 2067002, 21503L1101, 23255, 25253, 31612, 360066, 4324140, 5016, 5017, 517, 52017...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1980 - Nissan 200SX | L | 1952 | Upper | GAS | 4 Cyl 2.0L | - |
Showing 1 - 6 of 6 products
Loading...