Shop By Product Matching "Gates"
Choose a Year for your vehicle
2024
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
2011
2010
2009
2008
2007
2006
2005
2004
2003
2002
2001
2000
1999
1998
1997
1996
1995
1994
1993
1992
1991
1990
1989
1988
1987
1986
1985
1984
1983
1982
1981
1980
1979
1978
1977
1976
1975
1974
1973
1972
1971
1970
1969
1968
1967
1966
1965
1964
1963
1962
1961
1960
1959
1958
1957
1956
1955
1954
1953
1952
1951
1950
1949
1948
1947
1946
1943
1942
1941
1940
1939
1938
1937
Image
Product
Price
- BEDRUG 08-16 FORD SUPERDUTY 6.5' SHORT BED WITH FACTORY STEP GATE
- 3/4 in. Thick Floor; 1/4 in. Thick Side Walls; Includes Bulkhead And Tailgate; w/Tailgate Step With Tailgate Step
- BedRug Complete Truck Bed Liner; 3/4 in. Thick Floor; 1/4 in. Thick Side Walls; Includes Bulkhead And Tailgate; w/Tailgate Step;
- Product Attributes:
- Surface Preparation Required: Yes
- Install: No Drill, Hook & Loop
- Mounting Hardware Included: Yes
- Chemical Resistant: Yes
- Configuration: Multi Piece
- Mounting: Under Bed Rail & Tailgate Area
- Impact Resistant: Yes
- Features and Benefits:
- 100% Polypropylene/ultra Tough Work Surface
- Bleach/battery Acid/oil And Gas Wash Right Off
- Custom Fit For Each Truck/wont Scratch Truck Bed
- Designed For Exterior Use/will Not Absorb Water
- Installs In Minutes With Hook And Loop Fastener
- Limited Lifetime Warranty
- Looks And Feels Like Carpet
- Slip And Skid Resistant Fiber Surface
- Bottom Configuration: Ribbed
- Instruction Manual Included: Yes
- Category: Bedrug Bedliner
- Paintable: No
- Tailgate Cover Included: Yes
- Drilling Required: No
- Extras: Includes Tailgate Mat
-
Features:
- If installing a BedRug over a spray-in bedliner, supplemental installation kit #BRZSPRAYON is required
- Made of 100 percent polypropylene, the BedRug bed liner protects your truck, and provides an ultra tough work surface. BedRug is water and stain resistant. Holds up to beach, oil, and even battery acid!
Additional Fitment Information:
| Vehicle | Region | Bed Length |
|---|---|---|
| 2010 - Ford F-350 Super Duty | United States | 81.8 |
- BEDRUG 09-14 FORD F-150 6.5' BED WITH FACTORY STEP GATE
- 3/4 in. Thick Floor; 1/4 in. Thick Side Walls; Includes Bulkhead And Tailgate With Tailgate Step
- BedRug Complete Truck Bed Liner; 3/4 in. Thick Floor; 1/4 in. Thick Side Walls; Includes Bulkhead And Tailgate; w/Tailgate Step;
- Product Attributes:
- Surface Preparation Required: Yes
- Install: No Drill, Hook & Loop
- Mounting Hardware Included: Yes
- Chemical Resistant: Yes
- Configuration: Multi Piece
- Mounting: Under Bed Rail & Tailgate Area
- Impact Resistant: Yes
- Features and Benefits:
- 100% Polypropylene/ultra Tough Work Surface
- Bleach/battery Acid/oil And Gas Wash Right Off
- Custom Fit For Each Truck/wont Scratch Truck Bed
- Designed For Exterior Use/will Not Absorb Water
- Installs In Minutes With Hook And Loop Fastener
- Limited Lifetime Warranty
- Looks And Feels Like Carpet
- Slip And Skid Resistant Fiber Surface
- Bottom Configuration: Ribbed
- Instruction Manual Included: Yes
- Category: Bedrug Bedliner
- Paintable: No
- Tailgate Cover Included: Yes
- Drilling Required: No
- Extras: Includes Tailgate Mat
-
Features:
- If installing a BedRug over a spray-in bedliner, supplemental installation kit #BRZSPRAYON is required
- Made of 100 percent polypropylene, the BedRug bed liner protects your truck, and provides an ultra tough work surface. BedRug is water and stain resistant. Holds up to beach, oil, and even battery acid!
Additional Fitment Information:
| Vehicle | Region | Bed Length |
|---|---|---|
| 2012 - Ford F-150 | United States | 78.8 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 21
- 533
- End 1 Inside Diameter:
- 1.1
- 28
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.1
- 28
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
84129275
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2019 - GMC Terrain | L | 1998 | Upper | GAS | 4 Cyl 2.0L | 122 |
- W/145A. Alt.
- Accessory Belt Drive Kit (Heavy Duty)
- Product Attributes:
- Idler Pulley 1 Part Number: 36299
- Belt 1 Part Number: K060930hd
- Outside Circumference:
- 2377
- 916
- 93.585
- Belt 2 Part Number: K040355sf
- Tensioner Assembly Part Number: 39083
- Belt Top Width:
- .56
- .807
- 14
- 20
-
Features:
- Kit includes application-specific FleetRunner heavy duty serpentine belt(s), FleetRunner tensioner, idler pulleys as required and hardware (where applicable) needed to perform a complete serpentine belt drive refresh
- FleetRunner belts are engineered to handle high mileage, high idle times and high temperatures in abusive environments
- Complete system service extends preventive maintenance schedules
- Engineered to save your fleet money and reduce downtime
- Gates FleetRunner Heavy Duty Serpentine Kits make it easy to perform proper serpentine system service. One part number gets you everything you need in one package so you can keep your fleet on the road. Some kits offer improvements over OE designs, solving problems that have been discovered through thousands of miles of heavy duty maintenance histories.
This Part Fits the Following OEM/Substitute Numbers:
90K-39083B
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2017 - Chevrolet Suburban | V | 5967 | FLEX | 8 Cyl 6.0L | 364 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .947
- 24
- Outside Circumference:
- 1391
- 54.75
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1377
- 54.21
- Rib Quantity: 7
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
1070542, 117205052RM4, 25-070542, 2819931696, 7K542, 7PK1377
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Smart Fortwo | L | 898 | GAS | 3 Cyl 0.9L | 55 |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width:
- .531
- 13
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1158
- 45.625
- Construction: Notched
- Cross Section Designation: Hc50 Modified
- Effective Length:
- 1149
- 45.22
- Angle: 30
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
- Top Width:
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
This Part Fits the Following OEM/Substitute Numbers:
0211715023, 17452M, 25-9452M, 9452M
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1991 - Nissan Pickup | L | 2389 | Power Steering | GAS | 4 Cyl 2.4L | - |
- Interference engine application
- Timing Belt Tensioner
- Product Attributes:
- Contact Surface: Smooth/backside
- Inside Diameter: 30
- Pulley Quantity: 1
- Grade Type: Oe Exact
- Tensioner Type: Spring
- Pulley 1 Flanged: No
- Pulley Width 1 (mm): 26.5
- Pulley Outside Diameter 1 (mm): 60
- Material: Plastic
-
Features:
- Premium bearings meet or exceed OE standards
- Metal components resist contamination with composite sealant
- Engineered with high strength, low weight & quiet operation for efficient system operation
- Gates PowerGrip Timing Tensioners are engineered with OE-quality or OE-exact fit & performance, designed & tested to increase belt life, maintain optimal tension & eliminate the need for tensioning operation during installation.
This Part Fits the Following OEM/Substitute Numbers:
30677832, 490-3813, T43172
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Volvo C30 | L | 2521 | GAS | 5 Cyl 2.5L | 154 |
- VIN 202465 & After; Interference engine application
- Timing Belt Tensioner
- Product Attributes:
- Contact Surface: Smooth/backside
- Inside Diameter: 30
- Pulley Quantity: 1
- Grade Type: Oe Exact
- Tensioner Type: Spring
- Pulley 1 Flanged: No
- Pulley Width 1 (mm): 26.5
- Pulley Outside Diameter 1 (mm): 60
- Material: Plastic
-
Features:
- Premium bearings meet or exceed OE standards
- Metal components resist contamination with composite sealant
- Engineered with high strength, low weight & quiet operation for efficient system operation
- Gates PowerGrip Timing Tensioners are engineered with OE-quality or OE-exact fit & performance, designed & tested to increase belt life, maintain optimal tension & eliminate the need for tensioning operation during installation.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2005 - Volvo V50 | L | 2521 | GAS | 5 Cyl 2.5L | - |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 30
- 762
- End 1 Inside Diameter:
- 1.3
- 33
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.53
- 39
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
15160997, 22651, 26398X, 62423, 72193, 9284, E72193
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - Buick Rainier | L | - | Lower | GAS | 6 Cyl 4.2L | 256 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 10.1
- 257
- End 1 Inside Diameter:
- 1.3
- 33
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.3
- 33
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
15160996, 20382S, 22652, 62422, 71078, 9285, F10103
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - GMC Envoy | L | - | Upper | GAS | 6 Cyl 4.2L | 256 |
Showing 1 - 10 of 17074 products
Loading...