Image
Product
Price
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length: 559
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.75
- 44
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
This Part Fits the Following OEM/Substitute Numbers:
1035, 1222S, 1223, 1322, 142, 228850, 23277, 25532, 285065, 2910983, 31648, 360084, 3732564, 4949-101, 524221, 52423, 544, 6227...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|---|
| 1986 - Buick Regal | V | - | Lower | GAS | 8 Cyl 5.0L | H | 305 |
- Water Pump (Standard)
- Product Attributes:
- Outlet Quantity: 1
- Water Pump Drive Type: Accessory Belt
- Fan Clutch Included: No
- Thermostat And Housing Included: No
- Timing Belt Driven: No
- Impeller Rotation: Standard
- Includes Back Housing: No
- Pulley Included: No
- Impeller Material: Stamped Steel
-
Features:
- Quality-assured with 100 percent leakage and functional tests of seals, bearings, castings and fully assembled water pump
- Fits and performs exactly to OE specifications and requirements
- Premium water pumps are designed to enhance the performance of the equivalent standard pump
- Backed by a limited lifetime warranty
- Gates Water Pumps are recognized in the industry for their durability, superior quality and are manufactured for worry-free operations for your vehicle. Every Gates high-quality new water pump is constructed with premium alloy materials and a 100 percent functional test of seals and bearings along with a 100 percent leakage test for both the casting and assembled water pump. Get industry best and a guaranteed OE-quality fit, with Gates.
This Part Fits the Following OEM/Substitute Numbers:
10048917, 10108453, 12307869, 12522033, 12524131, 12529305, 12551306, 12555595, 130-1250, 130-1250HD, 130-1250HP, 130-1250P, 14085847, 18-308, 1AMWP00017, 20040, 20040H, 251-230...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1986 - Buick Regal | V | - | GAS | 8 Cyl 5.0L | H | 305 |
- Cut to Length, 6"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .75
- 19
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10229491, 12322343, 12368236, 12804554, 15043166, 15043168, 15079924, 15246436, 15282248, 15293037, 15755541, 15758384, 15782202, 1787185Z00, 1787285Z00, 19129880, 19129909, 19129949...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1986 - Buick Regal | V | - | GAS | 8 Cyl 5.0L | 307 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 1641
- 64.625
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1627
- 64.07
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
1060460, 1060640, 14-0592-8, 141-1377, 141-1504, 146-061623, 146-061625, 15569983, 201510, 203249, 203754, 204085, 208796, 25-060640, 25-060640HD, 25-76064, 25525518, 2U1L 8620 BA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 1986 - Buick Regal | V | 3800 | GAS | 6 Cyl 3.8L | Turbocharged | 231 |
- Cut to Length, 8"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .75
- 19
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1986 - Buick Regal | V | 3800 | Heater To Pipe | GAS | 6 Cyl 3.8L | 231 |
- Cut to Length, 4"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Weight Per Length: 13.20 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .75
- 19
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1986 - Buick Regal | V | 3800 | Pipe To Water Pump | GAS | 6 Cyl 3.8L | 231 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .667
- 17
- Outside Circumference:
- 1121
- 44.125
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1108
- 43.62
- Rib Quantity: 5
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
079903137E, 10223910, 1050435, 14-0874-8, 14088983, 141-1261, 141-1452, 141-1503, 146-051100, 146-051104, 146-051110, 1469870020, 195510710300, 200250, 200675, 201199, 201359, 201724...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|---|
| 1986 - Buick Regal | V | - | Fan and Alternator | GAS | 8 Cyl 5.0L | H | 305 |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1342
- 52.82
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 1321
- 52
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0295492, 03-02-368-0, 06580721342, 0951325, 10520, 10A1320, 10AV1325, 10AX1320, 10G1320, 1133, 11359, 11502114, 11502244, 1161612, 1161855, 1162132, 1164565, 1180370...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|---|
| 1986 - Buick Regal | V | - | Fan and Air Conditioning | GAS | 8 Cyl 5.0L | Y | 307 |
- DriveAlign Premium OE Pulley
- Product Attributes:
- Contact Surface: Smooth/backside
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 0
- Pulley 1 Outside Diameter (mm): 90
- Pulley 1 Flanged: No
- Bearing Bore Inside Diameter: 17
- Pulley 1 Width (mm): 30
- Material: Steel
-
Features:
- Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
- Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
- OE-quality fit for virtually every domestic or import vehicle on the road today
- Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
- Premium bearings eliminate bearing noise
- Mounting hardware included for some popular applications
- Reliable operation under severe conditions
- DriveAlign Idler Pulleys provide OE-quality fit to passenger cars and light trucks, performing as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
04536154, 04536154AB, 06003045, 06004123, 06004127, 10000400, 10042806, 10044970, 10069964, 10070000, 10078911, 10114908, 10115478, 10115874, 10124631, 10129518, 10129558, 10129559...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 1986 - Buick Regal | V | 3800 | Serpentine | GAS | 6 Cyl 3.8L | Turbocharged | 231 |
- OE Equivalent Fuel Cap
- Product Attributes:
- Grade Type: Oe Performance
- Shell Outside Diameter: 2.78
- Cam Type: Threaded
- Venting Type: Emission Control
- Thread Diameter: 1.77
- Lockable: No
- Depth: 2.05
- Type: Oe Equivalent Fuel Cap
-
Features:
- Fuel Caps are zinc-plated and dichromate dipped for superior corrosion resistance. Some models are made from rugged plastic
- EEC Fuel Caps meet OEM specifications & Federal and State Emission Requirements
- Two-way action pressure relief/vacuum relief valve allows fuel tank to “breathe” while preventing the escape of fuel fumes
- Seals are compounded from fuel-resistant rubber
- Exterior Fuel Caps have attractive chrome-plated finish
- OE Equivalent Fuel Caps feature rugged, heavy-duty construction. Meets or exceeds OEM specifications. Caps fit both shallow & deep cam filler necks - vented, non-vented & vented anti-surge.
This Part Fits the Following OEM/Substitute Numbers:
0K20142250, 10285948, 10817, 11817, 12335028, 12F46, 1325002-2, 15568336, 15597860, 15597861, 15619914, 15649035, 15671703, 159-0042, 15969279, 15978465, 15981957, 15996392...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1986 - Buick Regal | V | - | GAS | 8 Cyl 5.0L | 307 |
Showing 1 - 10 of 20 products
Loading...