Image
Product
Price
- W/O Housing
- PowerGrip Premium OE Timing Belt Component Kit W/Water Pump
- Product Attributes:
- Springs Included: Yes
- Bolt Quantity: 2
- Belt Quantity: 1
- Grade Type: Oe Exact
- Spring Quantity: 2
- Timing Belt Width 1 (mm): 27
- Belt Top Color: Black
- Bolt Included: Yes
- Installation Instructions Included: Yes
- Installation Tool Included: No
- Instruction Sheet Number: 0098-1622
- Tensioner Included: Yes
- Timing Belt 1 Teeth Quantity: 163
- Timing Belt Included: Yes
- Timing Marks: No
- Seal Quantity: 2
- Number of Components: 6
- Gasket Quantity: 2
- Gasket Or Seals Included: Yes
- Idler Pulley Included: Yes
- Idler Quantity: 1
- Engine Water Pump Quantity: 1
- Timing Belt Width 1 (in): 1.051
- Belt Material: Hsn, Fiberglass Cord
- Tensioner Type: Spring
- Tooth Type: Curvilinear (ii)
- Tensioner Quantity: 1
-
Features:
- Total solution for any application: Includes belts, idler(s), tensioners, tensioner springs, water pump, supporting hardware, detailed installation instructions and Technical Service Bulletins for troublesome applications
- Water pumps are designed and built for long lasting, efficient cooling
- Hydraulic tensioners included, where needed
- Everything you need to do the job right, all in one box
- Gates warranty matches the original manufacturer's timing belt replacement intervals – not just for parts – but also for labor and other associated costs
- Gates Timing Belt Component Kits with Water Pump offer customers the best and most complete repair solution by including the same premium components as our TCK’s - timing belts, pulleys and tensioners - as well as a water pump. Timing belt driven water pumps should always be replaced at the same time as the timing belt. Don't take chances. With Gates TCKWP’s, you can avoid returns by replacing all critical system components at the same time.
This Part Fits the Following OEM/Substitute Numbers:
20334K, 3470-0199, AWK1220, BWPK42240, CK199LK1, GTKWP199, PP199LK2, TB199LK1, TB199LK2, TBK199WP, TCKWP199, TKT003, USTK199, VKMA91003SWP, WP138K1A, WP138K1AS, WP199K1A, WP199K1AS...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1987 - Toyota Celica | L | 1998 | 3S-FE | GAS | 4 Cyl 2.0L | 122 |
- W/O A.C.
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .667
- 17
- Outside Circumference:
- 1032
- 40.625
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1016
- 40.01
- Rib Quantity: 5
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
1050400, 12634320, 1340721, 14-0892-4, 141-1343, 141-1409, 146-051010, 146-051015, 200583, 200784, 201363, 201657, 202010, 202045, 202049, 203095, 203554, 209329...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1987 - Toyota Celica | L | 1998 | Alternator | GAS | 4 Cyl 2.0L | 122 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .667
- 17
- Outside Circumference:
- 1121
- 44.125
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1108
- 43.62
- Rib Quantity: 5
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
079903137E, 10223910, 1050435, 14-0874-8, 14088983, 141-1261, 141-1452, 141-1503, 146-051100, 146-051104, 146-051110, 1469870020, 195510710300, 200250, 200675, 201199, 201359, 201724...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1987 - Toyota Celica | L | 1998 | Alternator and Air Conditioning | GAS | 4 Cyl 2.0L | 122 |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 124
- 4.9
- End 1 Inside Diameter:
- .61
- 15
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- .61
- 15
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0491210631, 1, 10042686, 1010, 10120087, 122310, 12604942, 1333180, 1370436, 14-1725-8, 142-0801, 142-5941, 14207S, 1489658, 15115123, 15612108, 15665113, 15727639...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1987 - Toyota Celica | L | 1998 | GAS | 4 Cyl 2.0L | GTS | 122 |
Additional Fitment Information:
| Vehicle | Engine Designation |
|---|---|
| 1987 - Toyota Celica | 3S-GELC |
Additional Fitment Information:
| Vehicle | Engine Designation | Prod. Date Range |
|---|---|---|
| 1987 - Toyota Celica | 3S-FE | Fr:08-00-86 |
Additional Fitment Information:
| Vehicle | Engine Designation |
|---|---|
| 1987 - Toyota Celica | 3S-GELC |
- OE Type
- Production: 08/1986-
- w/o Gasket (82°C/180°F)
Additional Fitment Information:
| Vehicle | Engine Designation | Prod. Date Range |
|---|---|---|
| 1987 - Toyota Celica | 3S-FE | Fr:08-00-86 |
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length:
- 17
- 432
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.25
- 32
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
This Part Fits the Following OEM/Substitute Numbers:
1016636, 1040, 1082A64H03, 1118, 114, 1303648, 1602144, 2067002, 21503L1101, 23255, 25253, 31612, 360066, 4324140, 5016, 5017, 517, 52017...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1987 - Toyota Celica | L | 1998 | Upper | GAS | 4 Cyl 2.0L | 122 |
- OE Equivalent Fuel Cap
- Product Attributes:
- Grade Type: Oe Performance
- Shell Outside Diameter: 2.78
- Cam Type: Threaded
- Venting Type: Emission Control
- Thread Diameter: 1.77
- Lockable: No
- Depth: 2.05
- Type: Oe Equivalent Fuel Cap
-
Features:
- Fuel Caps are zinc-plated and dichromate dipped for superior corrosion resistance. Some models are made from rugged plastic
- EEC Fuel Caps meet OEM specifications & Federal and State Emission Requirements
- Two-way action pressure relief/vacuum relief valve allows fuel tank to “breathe” while preventing the escape of fuel fumes
- Seals are compounded from fuel-resistant rubber
- Exterior Fuel Caps have attractive chrome-plated finish
- OE Equivalent Fuel Caps feature rugged, heavy-duty construction. Meets or exceeds OEM specifications. Caps fit both shallow & deep cam filler necks - vented, non-vented & vented anti-surge.
This Part Fits the Following OEM/Substitute Numbers:
0K20142250, 10285948, 10817, 11817, 12335028, 12F46, 1325002-2, 15568336, 15597860, 15597861, 15619914, 15649035, 15671703, 159-0042, 15969279, 15978465, 15981957, 15996392...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1987 - Toyota Celica | L | 1998 | GAS | 4 Cyl 2.0L | 122 |
Showing 1 - 10 of 17 products
Loading...