Image
Product
Price
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 114
- 4.5
- End 1 Inside Diameter:
- .94
- 24
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- .94
- 24
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
14240S, 22038, 25530817, 4483761, 53008654, 626-546, 63064, 64371, 71651, 72025, 8722, 97JM 8548 AG, A71651, B72025, C2038, F77Z 8548 AF, KM-3269, KM-3337...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Ford Explorer | V | - | GAS | 6 Cyl 4.0L | 245 |
- W/"V" Locator Tab
- DriveAlign Premium OE Automatic Belt Tensioner
- Product Attributes:
- Contact Surface: V-ribbed Grooved
- Grade Type: Oe Exact
- Pulley 1 Flanged: Yes
- Mounting Hole Quantity: 1
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 6
- Outside Diameter 1 (mm): 70
- Width 1 (mm): 25
- Bearing Bore Inside Diameter:
- .67
- 17
- Width 1 (in): .98
- Material: Thermoplastic
- Outside Diameter 1 (in): 2.76
- Belt Type: V-ribbed
-
Features:
- Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
- Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
- Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
- Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
- Torsional round spring design provides reliability as well as consistent tension
- Gates is a global leader in Original Equipment system design and brings the same OE-quality, durability, fit and performance to our premium DriveAlign Automatic Belt Tensioners. We ensure every tensioner is manufactured to rigid tolerances and specifications that guarantee OE fit, form and function.
This Part Fits the Following OEM/Substitute Numbers:
180230, 305230, 35102, 38102, 419-200, 45898, 49202, 89230, 89230FN, 999009, 999009A, BT-46, F37Z 6B209 A, F3TZ 6B209 C, F47E 6B209 AA, F4TE 6B209 AA, F77E 6B209 AA, F77Z 6B209 AA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Ford Explorer | V | - | GAS | 6 Cyl 4.0L | 245 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 2219
- 87.37
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 2200
- 86.64
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
1340A150, 1416245, 1F2218381, 1F7218381, 1L5E 8620 CB, 1L5Z 8620 CA, 1L5Z 8620 CB, 25-060866, 252122E000, 252122E800, 30731937, 4L5Z 8620 EA, 506200056, 53013864AA, 53032037AJ, 6G9Q6C301CA, 6K2199, 6K866...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - Ford Explorer | V | - | SOHC | GAS | 6 Cyl 4.0L | 245 |
- W/Round Locator Pin
- DriveAlign Premium OE Automatic Belt Tensioner
- Product Attributes:
- Contact Surface: V-ribbed Grooved
- Grade Type: Oe Exact
- Pulley 1 Flanged: Yes
- Mounting Hole Quantity: 1
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 6
- Outside Diameter 1 (mm): 70
- Width 1 (mm): 25
- Bearing Bore Inside Diameter:
- .67
- 17
- Width 1 (in): .98
- Material: Thermoplastic
- Outside Diameter 1 (in): 2.76
- Belt Type: V-ribbed
-
Features:
- Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
- Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
- Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
- Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
- Torsional round spring design provides reliability as well as consistent tension
- Gates is a global leader in Original Equipment system design and brings the same OE-quality, durability, fit and performance to our premium DriveAlign Automatic Belt Tensioners. We ensure every tensioner is manufactured to rigid tolerances and specifications that guarantee OE fit, form and function.
This Part Fits the Following OEM/Substitute Numbers:
1F22 15 980, 1L5E 6B209 AB, 1L5E 6B209 AC, 1L5E 6B209 AD, 305252, 35137, 38137, 4124, 419-210, 4535673, 45863, 49250, 660-1904, 6L2E 6B209 CA, 6L2Z 6B209 A, 6L2Z 6B209 B, 89252FN, 999021...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Ford Explorer | V | - | GAS | 6 Cyl 4.0L | 245 |
- Water Pump (Standard)
- Product Attributes:
- Outlet Quantity: 3
- Water Pump Drive Type: Accessory Belt
- Fan Clutch Included: No
- Thermostat And Housing Included: No
- Timing Belt Driven: No
- Impeller Rotation: Standard
- Includes Back Housing: No
- Pulley Included: No
- Impeller Material: Cast Iron
-
Features:
- Quality-assured with 100 percent leakage and functional tests of seals, bearings, castings and fully assembled water pump
- Fits and performs exactly to OE specifications and requirements
- Premium water pumps are designed to enhance the performance of the equivalent standard pump
- Backed by a limited lifetime warranty
- Gates Water Pumps are recognized in the industry for their durability, superior quality and are manufactured for worry-free operations for your vehicle. Every Gates high-quality new water pump is constructed with premium alloy materials and a 100 percent functional test of seals and bearings along with a 100 percent leakage test for both the casting and assembled water pump. Get industry best and a guaranteed OE-quality fit, with Gates.
This Part Fits the Following OEM/Substitute Numbers:
125-2102, 131-2357, 1386525, 18-1488, 1AMWP00057, 1F2215010, 1F8215010, 20227, 226055, 252-544, 3-9166, 314096, 43279, 4741275, 51-1729, 55-4108, 58543, 6H2E 8501 AB...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - Ford Explorer | V | - | SOHC | GAS | 6 Cyl 4.0L | 245 |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 241
- 9.5
- End 1 Inside Diameter:
- .62
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .62
- 16
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
05005341AB, 11005, 14148S, 19005, 1L2Z 18472 CB, 602023801, 64323, 8724589122, B91030, F77Z 18472 AA, F7TH 18472 AB, KH-66
Additional Fitment Information:
| Vehicle | Block | CC | Position | Cylinder Head Type | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2000 - Ford Explorer | V | - | Valve-1 To Water Pump | SOHC | GAS | 6 Cyl 4.0L | 245 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 18.7
- 475
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.5
- 38
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
095, 1352339, 203011609, 20470, 24015L, 2532663, 2907396, 346, 3780635, 3882884, 3940639, 3947866, 512, 60411, 62550, 70346, 70512, 70519...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - Ford Explorer | V | - | Lower | GAS | 6 Cyl 4.0L | 245 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 2245
- 88.387
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 2231
- 87.82
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
1060878, 12590807, 12637203, 14-0591-0, 25-060878, 25-060878HD, 252123F360, 33002964, 3P903-15780, 4060878, 4060878F, 4S4Q 6C301 EA, 4S4Z 8620 EA, 4S4Z 8620 EB, 4S4Z8620EB, 5060878, 5060878DR, 5060880...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - Ford Explorer | V | - | OHV | GAS | 6 Cyl 4.0L | 245 |
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length:
- 17
- 432
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.5
- 38
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
01002124, 10-18944, 100370, 1026, 10MF29301P2, 1117024, 113, 118040, 1216S, 1217, 129980306, 1301304, 134MDR1, 145788, 1657156011, 1719640, 17348, 182347M1...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - Ford Explorer | V | - | Lower | GAS | 6 Cyl 4.0L | 245 |
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length:
- 17
- 432
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.5
- 38
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Cylinder Head Type | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2000 - Ford Explorer | V | - | Upper - Radiator To Pipe | SOHC | GAS | 6 Cyl 4.0L | 245 |
Showing 1 - 10 of 55 products
Loading...