Image
Product
Price
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 123
- 4.83
- End 1 Inside Diameter:
- .25
- 6
- Material: Epdm
- End 2 Inside Diameter:
- .25
- 6
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10623, 12570528, 14754S, 18623, 86504, B86504
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - GMC Yukon | V | 5328 | Throttle Body To Engine | GAS | 8 Cyl 5.3L | 325 |
- W/130A. Alt.
- Accessory Belt Drive Kit (Standard)
- Product Attributes:
- Idler Pulley 1 Part Number: 38001
- Belt 1 Part Number: K060930
- Outside Circumference:
- 2377
- 93.585
- Tensioner Assembly Part Number: 38158
- Belt Top Width:
- .807
- 20
-
Features:
- Designed for convenience, easy parts sourcing and reduced customer comebacks
- Includes serpentine belt with premium EPDM construction, tensioner, applicable idler pulleys and applicable tensioner hardware
- Meets or exceeds OE standards in form, function and fit
- NOTE: Kit contents vary depending on specific needs of vehicle kit application
- Complete Serpentine Kits make it easy to restore the entire accessory belt drive system. Eliminate customer comebacks by fixing the vehicle the first time by servicing the entire serpentine drive. Neglecting to replace the tensioner and pulley(s) at the same time you replace the belt can ultimately shorten the life of the belt as well as other front-end accessory components. Each kit contains an OE-equivalent belt, tensioner, idler pulley and necessary hardware with installation instructions and tech tips for easy, accurate installation for virtually every vehicle on the road today.
This Part Fits the Following OEM/Substitute Numbers:
90K-38158B, ACK060930, D60930K1, DBK060930, K49275B, LV999033C
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2000 - GMC Yukon | V | 5328 | GAS | 8 Cyl 5.3L | 325 |
- DriveAlign Premium OE Automatic Belt Tensioner
- Product Attributes:
- Contact Surface: V-ribbed Grooved
- Grade Type: Oe Exact
- Pulley 1 Flanged: Yes
- Mounting Hole Quantity: 3
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 6
- Outside Diameter 1 (mm): 76
- Width 1 (mm): 25
- Bearing Bore Inside Diameter:
- .67
- 17
- Width 1 (in): .98
- Material: Thermoplastic
- Outside Diameter 1 (in): 2.99
- Belt Type: V-ribbed
-
Features:
- Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
- Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
- Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
- Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
- Torsional round spring design provides reliability as well as consistent tension
- Gates is a global leader in Original Equipment system design and brings the same OE-quality, durability, fit and performance to our premium DriveAlign Automatic Belt Tensioners. We ensure every tensioner is manufactured to rigid tolerances and specifications that guarantee OE fit, form and function.
This Part Fits the Following OEM/Substitute Numbers:
12554027, 12580162, 305253, 35158, 38158, 419-112, 45843, 49275, 89253, 89253FN, 999033, 999033A, GT38158, SMAMP40253
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - GMC Yukon | V | 5328 | Serpentine | GAS | 8 Cyl 5.3L | 325 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 18
- 457
- End 1 Inside Diameter:
- 1.52
- 39
- Material: Epdm, Plastic
- Modular: No
- End 2 Inside Diameter:
- 1.52
- 39
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
15031305, 15037656, 15710112, 15769077, 15792826, 15907960, 19130015, 22437, 22742967, 22827735, 22861887, 24403L, 25891043, 62261, 71990, 9070, C2437, E71990...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - GMC Yukon | V | 5328 | Lower | GAS | 8 Cyl 5.3L | 325 |
- DriveAlign Premium OE Automatic Belt Tensioner
- Product Attributes:
- Contact Surface: Smooth/backside
- Grade Type: Oe Exact
- Pulley 1 Flanged: No
- Mounting Hole Quantity: 2
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 0
- Outside Diameter 1 (mm): 60
- Width 1 (mm): 21
- Bearing Bore Inside Diameter: .47
- Width 1 (in): .83
- Material: Steel
- Outside Diameter 1 (in): 2.36
- Belt Type: V-ribbed
-
Features:
- Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
- Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
- Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
- Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
- Torsional round spring design provides reliability as well as consistent tension
- Gates is a global leader in Original Equipment system design and brings the same OE-quality, durability, fit and performance to our premium DriveAlign Automatic Belt Tensioners. We ensure every tensioner is manufactured to rigid tolerances and specifications that guarantee OE fit, form and function.
This Part Fits the Following OEM/Substitute Numbers:
12562065, 12565372, 12580196, 305258, 35159, 38159, 419-109, 45530, 49276, 89258, 89258FN, 999034, 999034A, GM1413171, GT38159, SMAMP40258
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - GMC Yukon | V | 5328 | Air Conditioning | GAS | 8 Cyl 5.3L | 325 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 29.1
- 739
- End 1 Inside Diameter:
- 1.52
- 39
- Material: Epdm, Plastic
- Modular: No
- End 2 Inside Diameter:
- 1.77
- 45
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
1029, 15655016, 15655028, 15657362, 15659495, 15659497, 15671766, 15671907, 15977371, 21941, 26207X, 62075, 71762, 72088, 8631, C1941, D71762, E72088...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - GMC Yukon | V | - | Lower | GAS | 8 Cyl 5.7L | 350 |
- DriveAlign Premium OE Automatic Belt Tensioner
- Product Attributes:
- Contact Surface: V-ribbed Grooved
- Grade Type: Oe Improved
- Pulley 1 Flanged: Yes
- Mounting Hole Quantity: 1
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 6
- Outside Diameter 1 (mm): 70
- Width 1 (mm): 25
- Bearing Bore Inside Diameter:
- .67
- 17
- Width 1 (in): .98
- Material: Thermoplastic
- Outside Diameter 1 (in): 2.76
- Belt Type: V-ribbed
-
Features:
- Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
- Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
- Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
- Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
- Torsional round spring design provides reliability as well as consistent tension
- Gates is a global leader in Original Equipment system design and brings the same OE-quality, durability, fit and performance to our premium DriveAlign Automatic Belt Tensioners. We ensure every tensioner is manufactured to rigid tolerances and specifications that guarantee OE fit, form and function.
This Part Fits the Following OEM/Substitute Numbers:
10239670, 12456152, 12561094, 12580296, 180231, 305231, 31025168, 35103, 38103, 4145, 419-100, 45897, 49203, 8102396700, 89017309, 89231, 89231FN, 999010...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2000 - GMC Yukon | V | - | GAS | 8 Cyl 5.7L | 350 |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 35.78
- 909
- End 1 Inside Diameter:
- .23
- 6
- Material: Epdm
- End 2 Inside Diameter: .3
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10126, 15020224, 15041308, 15190788, 15274729, 15788670, 18126, 18206L, 22717008, 22733960, 22742965, 22827734, 25803110, 25976471, 64113, 64413, 86836, E86836...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - GMC Yukon | V | 5328 | Radiator To Throttle Body | GAS | 8 Cyl 5.3L | 325 |
- Molded Coolant Hose
- Product Attributes:
- End 3 Inside Diameter: .75
- End 4 Inside Diameter:
- 1
- 25
- Contains Spring: No
- End 2 Inside Diameter:
- .63
- 16
- Quick Connect Fitting Quantity: 0
- Branch Quantity: 1
- Modular Components Included: Branch
- Molded: Yes
- Centerline Length:
- 19
- 19.1
- 485
- End 1 Inside Diameter:
- .63
- 16
- Material: Epdm, Plastic
- Modular: Yes
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube
- synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
- Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
- Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates is the Automotive Aftermarket leader in the unique modular assembly coolant hose segment. Gates Modular Coolant Hose is manufactured to fit specific applications and are similar to OEM specifications to include specific essential integrated OE components such as hose branches, quick-connectors, sensors, restrictors, etc.
This Part Fits the Following OEM/Substitute Numbers:
10367225, 15005677, 15032528, 15039023, 15051847, 15051850, 15058002, 15059576, 15059577, 15128150, 15792821, 15792822, 15834772, 15834773, 15854959, 18221L, 21994332, 22554...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - GMC Yukon | V | 5328 | Heater To Tank | GAS | 8 Cyl 5.3L | 325 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 1214
- 47.8
- End 1 Inside Diameter:
- 1.27
- 32
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.27
- 32
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
10379176, 15041305, 15045504, 15057981, 15076028, 15078028, 15179498, 22436, 26390X, 62262, 62634, 71989, 9069, C2436, D92675, E71989
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - GMC Yukon | V | 5328 | Upper | GAS | 8 Cyl 5.3L | 325 |
Showing 1 - 10 of 72 products
Loading...