Image
Product
Price
- W/O Quick Connector; Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 11.9
- 302
- End 1 Inside Diameter:
- .75
- 19
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - Volkswagen Beetle | L | 1896 | Heater To Pipe-1 | DIESEL | 4 Cyl 1.9L | 116 |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 11.9
- 302
- End 1 Inside Diameter:
- .75
- 19
- Material: Epdm
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
11705, 16184M, 1787185Z00, 19705, 1C0121036D, 1C0121086K, 1J0121073A, 25654621, 25708701, 25740133, 64324, 88438, 92411JK60A, 96456718, 96553218, D88438
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - Volkswagen Beetle | L | 1984 | Heater To Pipe-1 | GAS | 4 Cyl 2.0L | 121 |
- W/Plastic Impeller; Interference engine application; Timing Belt Driven
- Water Pump (Standard)
- Product Attributes:
- Outlet Quantity: N/a
- Water Pump Drive Type: Timing Belt
- Fan Clutch Included: No
- Thermostat And Housing Included: No
- Installation Warnings: Coolant Flush Required. Fill W/ New Volkswagen Coolant Or Oe Equivalent Only.
- Timing Belt Driven: Yes
- Impeller Rotation: Standard
- Includes Back Housing: No
- Pulley Included: Yes
- Impeller Material: Plastic
-
Features:
- Quality-assured with 100 percent leakage and functional tests of seals, bearings, castings and fully assembled water pump
- Fits and performs exactly to OE specifications and requirements
- Premium water pumps are designed to enhance the performance of the equivalent standard pump
- Backed by a limited lifetime warranty
- Gates Water Pumps are recognized in the industry for their durability, superior quality and are manufactured for worry-free operations for your vehicle. Every Gates high-quality new water pump is constructed with premium alloy materials and a 100 percent functional test of seals and bearings along with a 100 percent leakage test for both the casting and assembled water pump. Get industry best and a guaranteed OE-quality fit, with Gates.
This Part Fits the Following OEM/Substitute Numbers:
06A121011F, 06A121011G, 06A121011H, 06A121011HX, 06A121011L, 06A121011LX, 06A121011T, 06A121011TX, 06A121012, 06A121012D, 06A121012E, 06A121012G, 06A121012X, 06A121018B, 06A121031C, 1-9270, 131-2227, 133024...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Volkswagen Beetle | L | 1984 | GAS | 4 Cyl 2.0L | 121 |
- W/Plastic Impeller; Interference engine application; Timing Belt Driven
- Water Pump (Standard)
- Product Attributes:
- Outlet Quantity: N/a
- Water Pump Drive Type: Timing Belt
- Fan Clutch Included: No
- Thermostat And Housing Included: No
- Installation Warnings: Coolant Flush Required. Fill W/ New Volkswagen Coolant Or Oe Equivalent Only.
- Timing Belt Driven: Yes
- Impeller Rotation: Standard
- Includes Back Housing: No
- Pulley Included: Yes
- Impeller Material: Plastic
-
Features:
- Quality-assured with 100 percent leakage and functional tests of seals, bearings, castings and fully assembled water pump
- Fits and performs exactly to OE specifications and requirements
- Premium water pumps are designed to enhance the performance of the equivalent standard pump
- Backed by a limited lifetime warranty
- Gates Water Pumps are recognized in the industry for their durability, superior quality and are manufactured for worry-free operations for your vehicle. Every Gates high-quality new water pump is constructed with premium alloy materials and a 100 percent functional test of seals and bearings along with a 100 percent leakage test for both the casting and assembled water pump. Get industry best and a guaranteed OE-quality fit, with Gates.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - Volkswagen Beetle | L | 1781 | Main | GAS | 4 Cyl 1.8L | - |
- Cut to Length, 4"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 8.25 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .5
- 13
- Material: Epdm
- End 2 Inside Diameter:
- .5
- 13
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
06A121497AA, 06A121497E, 09551D100, 100799100C, 10378155, 12608670, 12787736, 140551FJ0A, 14055EW600, 15077095, 15077147, 15181119, 15257756, 15710551, 15727309, 15763280, 15763290, 15834774...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - Volkswagen Beetle | L | 1781 | Turbocharger To Engine | GAS | 4 Cyl 1.8L | - |
- DriveAlign Premium OE Pulley
- Product Attributes:
- Contact Surface: Smooth/backside
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 0
- Pulley 1 Outside Diameter (mm): 70
- Pulley 1 Flanged: No
- Bearing Bore Inside Diameter: 17
- Pulley 1 Width (mm): 26
- Material: Thermoplastic
-
Features:
- Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
- Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
- OE-quality fit for virtually every domestic or import vehicle on the road today
- Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
- Premium bearings eliminate bearing noise
- Mounting hardware included for some popular applications
- Reliable operation under severe conditions
- DriveAlign Idler Pulleys provide OE-quality fit to passenger cars and light trucks, performing as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley.
This Part Fits the Following OEM/Substitute Numbers:
04854089A, 06A903315D, 06A903315E, 06A903315F, 11281439062, 11287503427, 11287515866, 11287515867, 166200V010, 1662036030, 19189978, 1F2015980, 1L5Q 6A228 AB, 1L5Z 6B209 A, 1L5Z 6B209 AA, 231033, 231144, 23770AA05A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Volkswagen Beetle | L | 1984 | GAS | 4 Cyl 2.0L | 121 |
- Molded
- Flange to Automatic Transmission Cooler
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Volkswagen Beetle | L | 1984 | Automatic | 4 Cyl 2.0L | 121 |
- Molded
- Adapter to Auxiliary Water Pump
- Adapter>Aux Water Pump
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Volkswagen Beetle | L | 1781 | 4 Cyl 1.8L | - |
- W/A.C.; Available Until Stock Depleted
- Premium OE Dual Sided Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 1232
- 48.5
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1200
- 47.25
- Rib Quantity: 6
- Type: Automotive Dual-sided V-ribbed Belt
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Micro-V belt ribs on both sides of the belt
- Specially designed to resist wear and cracking due to overall reduced thickness in construction
- Custom setup for specialized Gates Solution Kits for serpentine drives that cause problems from the OEM
- Broad, application-specific coverage
- Tensioner Replacement is Recommend (if equipped)
- Gates Dual-Sided Micro-V belt replace original equipment belts on serpentine drives that require a higher degree of efficiency when transmitting power. These belts are designed for small diameter pulleys, used with or without automatic tensioners.
This Part Fits the Following OEM/Substitute Numbers:
06A260849, 06A260849B, 06A260849C, 06A260849E, 1111928, 2060472, 25-D060472, 470DK6MK, 470KK6, 472DK6MK, 6060470, 6060470DR, 6DK472, 6DPK1195, 6DPK1199, 6DPK1200, 6PKK1195, 6PVKK1195...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Volkswagen Beetle | L | 1984 | GAS | 4 Cyl 2.0L | 121 |
- Available Until Stock Depleted
- Premium OE Dual Sided Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 1232
- 48.5
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1200
- 47.25
- Rib Quantity: 6
- Type: Automotive Dual-sided V-ribbed Belt
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Micro-V belt ribs on both sides of the belt
- Specially designed to resist wear and cracking due to overall reduced thickness in construction
- Custom setup for specialized Gates Solution Kits for serpentine drives that cause problems from the OEM
- Broad, application-specific coverage
- Tensioner Replacement is Recommend (if equipped)
- Gates Dual-Sided Micro-V belt replace original equipment belts on serpentine drives that require a higher degree of efficiency when transmitting power. These belts are designed for small diameter pulleys, used with or without automatic tensioners.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Volkswagen Beetle | L | 1781 | GAS | 4 Cyl 1.8L | - |
Showing 1 - 10 of 17 products
Loading...