Image
Product
Price
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 18.2
- 462
- End 1 Inside Diameter:
- 1.22
- 31
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.22
- 31
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
19501PNB000, 22492M, 22848, 62392, 62715, 72142, 9483, CH4609, E72142
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2002 - Honda CR-V | L | 2354 | Upper | GAS | 4 Cyl 2.4L | 144 |
- Engine Variable Valve Timing Solenoid
- Product Attributes:
- : Steel
- Overall Height:
- 1.031
- 26.2
- Connector Gender: Female
- Mounting Hardware Included: No
- Housing Width:
- 1.031
- 26.2
- Connector Quantity: 2
- Terminal Quantity: 2
- Seal Included: Yes
- Housing Length:
- 1.102
- 28
- Activation Type: Electromagnetic
- Terminal Type: Pin
- Terminal Gender: Male
-
Features:
- Continuously controls oil flow for precise timing and maximum engine performance
- Direct replacement ensures exact fit and easy installation
- Superior construction with exceptional components
- Gates OE performance Variable Valve Timing Solenoids, commonly referred to as Oil Control Valves, are designed to OE specifications in fit, form and performance. Each component is constructed from high quality materials for durability and maximum service life and tested to effectively restore engine performance for better fuel economy, enhanced power, improved idle and reduced emissions.
This Part Fits the Following OEM/Substitute Numbers:
15810RAAA03, 2T1147, 7V-5008, 917-224, R53013, TS1147, VTS1189, VV1044, VVS214, VVT144
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2002 - Honda CR-V | L | 2354 | Spool Valve | GAS | 4 Cyl 2.4L | 144 |
- Models made in USA.
- DriveAlign Premium OE Automatic Belt Tensioner
- Product Attributes:
- Contact Surface: Smooth/backside
- Grade Type: Oe Exact
- Pulley 1 Flanged: No
- Mounting Hole Quantity: 5
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 0
- Outside Diameter 1 (mm): 76.5
- Width 1 (mm): 37.5
- Bearing Bore Inside Diameter:
- .67
- 17
- Width 1 (in): 1.48
- Material: Steel
- Outside Diameter 1 (in): 3.01
- Belt Type: V-ribbed
-
Features:
- Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
- Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
- Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
- Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
- Torsional round spring design provides reliability as well as consistent tension
- Gates is a global leader in Original Equipment system design and brings the same OE-quality, durability, fit and performance to our premium DriveAlign Automatic Belt Tensioners. We ensure every tensioner is manufactured to rigid tolerances and specifications that guarantee OE fit, form and function.
This Part Fits the Following OEM/Substitute Numbers:
305321, 31170PNA003, 31170PNA013, 31170RAAA01, 31170RAAA02, 38278, 419-005, 419005, 45712, 49341, 89321, 89321FN, 999661, 999661A, HA1413172
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2002 - Honda CR-V | L | 2354 | GAS | 4 Cyl 2.4L | 144 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .947
- 24
- Outside Circumference:
- 1750
- 68.904
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1736
- 68.34
- Rib Quantity: 7
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
1070683, 1172000Q0F, 25-070683, 31110RLF003, 38920PNB003, 38920PNB004, 38920PNB013, 4070682, 4070685, 5037206AC, 5037206AD, 5037206AE, 5070683, 5070683DR, 682K7MK, 683K7, 685K7, 7K683...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2002 - Honda CR-V | L | 2354 | GAS | 4 Cyl 2.4L | 144 |
- DriveAlign Premium OE Pulley
- Product Attributes:
- Contact Surface: Smooth/backside
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 0
- Pulley 1 Outside Diameter (mm): 76
- Pulley 1 Flanged: No
- Bearing Bore Inside Diameter: 17
- Pulley 1 Width (mm): 37
- Material: Steel
-
Features:
- Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
- Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
- OE-quality fit for virtually every domestic or import vehicle on the road today
- Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
- Premium bearings eliminate bearing noise
- Mounting hardware included for some popular applications
- Reliable operation under severe conditions
- DriveAlign Idler Pulleys provide OE-quality fit to passenger cars and light trucks, performing as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley.
This Part Fits the Following OEM/Substitute Numbers:
180237, 1L3E 6B209 AA, 1L3Z 6B209 AA, 2W93 19A216 BA, 2W9Z 8678 BA, 305237, 305257, 31180PNA003, 31180PNAJ01, 31180RAAA01, 35133, 38028, 38133, 38191, 419-207, 419-214, 419214, 45560...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2002 - Honda CR-V | L | 2354 | GAS | 4 Cyl 2.4L | 144 |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Honda CR-V | Lower |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Honda CR-V | Upper |
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2002 - Honda CR-V | EX |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Honda CR-V | Heater To Engine |
Additional Fitment Information:
| Vehicle |
|---|
| 2002 - Honda CR-V |
Showing 1 - 10 of 11 products
Loading...