Image
Product
Price
- 3mm Zip Tie Required for Installation
- Premium OE Stretch Fit Micro-V Belt
- Product Attributes:
- Top Width:
- .42
- 11
- Outside Circumference:
- 25.625
- 650
- Instruction Manual Included: Sheet E
- Grade Type: Oe Exact
- Cross Section Designation: K
- Effective Length:
- 25.04
- 636
- Rib Quantity: 3
- Type: Automotive V-ribbed Belt (stretch Fit)
- Cord Material: Nylon
- Material: Epdm
- Installation Tools Requirements: 3 Mm Zip Tie
- Top Width:
-
Features:
- Specially formulated adhesive literally locks onto the cord, allowing the cord to elongate and stretch, but never lose tension
- Gates engineered tensile cord has the needed combination of strength and flexibility using advanced polyamide tensile cord
- Patented highly engineered EPDM belt ribs are extremely resistant to contamination, wear and pilling
- NOTE: Stretch Fit belts are single-use only and must be replaced if removed
- Gates Micro-V Stretch Fit Belts, with exclusive self-tensioning technology, fit like a glove and perform properly on unique stretch fit drive systems. Gates continues to add coverage to this growing market segment.
This Part Fits the Following OEM/Substitute Numbers:
25-030250SF, 250K3S, 3K250SF, 3PK648EE, 3PK650, 4030250S, 5L8E 8K543 AA, 5L8Z 8620 AA, AJ0415908, E030250, K030250SF, S030250
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2005 - Ford Escape | V | 2968 | Water Pump | GAS | 6 Cyl 3.0L | 181 |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 213
- 8.4
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.5
- 38
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
20376S, 22448, 2S7Z 8A567 AA, 2S7Z 8A567 AD, 4F22 8261 AA, 62732, 71728, 71984, 72385, 9081, B71728, B71984, B72385, F5RZ 8A567 A, GY0115536, KH337, KM-4392, XF22 8291 AA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2005 - Ford Escape | V | 2968 | Water Pump To Thermostat | GAS | 6 Cyl 3.0L | 181 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 2146
- 84.5
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 2133
- 83.97
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
0039935796, 074260849J, 1060840, 14-0839-4, 25-060840, 252122G710, 4015903, 4060840, 4593685AA, 4L8E 8620 AB, 4L8Z 8620 AB, 4S4Q 6C301 FA, 5060840, 5060840DR, 5L3Z 8620 EA, 6019970392KZ, 6K2130, 6K840...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2005 - Ford Escape | V | 2968 | Accessory Drive | GAS | 6 Cyl 3.0L | 181 |
- DriveAlign Premium OE Automatic Belt Tensioner
- Product Attributes:
- Contact Surface: Smooth/backside
- Grade Type: Oe Exact
- Pulley 1 Flanged: No
- Mounting Hole Quantity: 1
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 0
- Outside Diameter 1 (mm): 76
- Width 1 (mm): 30.5
- Bearing Bore Inside Diameter:
- .67
- 17
- Width 1 (in): 1.2
- Material: Steel
- Outside Diameter 1 (in): 2.99
- Belt Type: V-ribbed
-
Features:
- Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
- Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
- Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
- Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
- Torsional round spring design provides reliability as well as consistent tension
- Gates is a global leader in Original Equipment system design and brings the same OE-quality, durability, fit and performance to our premium DriveAlign Automatic Belt Tensioners. We ensure every tensioner is manufactured to rigid tolerances and specifications that guarantee OE fit, form and function.
This Part Fits the Following OEM/Substitute Numbers:
1X4E6B209AC, 1X4Z 6B209 AA, 305370, 305634, 38279, 3W43 6B209 AA, 3W4Z 6B209 AA, 49344, 4L8E 6B209 AC, 4L8E6B209AB, 4L8Z 6B209 AA, 4R8E 6B209 AA, 4R8E 6B209 AB, 4R8Z 6B209 AA, 89370, 89370FN, 89634, 999707...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2005 - Ford Escape | V | 2968 | Accessory Drive | GAS | 6 Cyl 3.0L | 181 |
- Optional Belt; W/O A.C.
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 2201
- 86.648
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 2186
- 86.08
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
1060860, 14-0596-0, 14100679, 14102594, 1X500662, 201198, 202906, 203285, 203608, 24501983, 24503551, 25-060860, 25-060860HD, 25-76086, 3520768, 3523439, 3808254C1, 406-0860...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2005 - Ford Escape | L | - | GAS | 4 Cyl 2.3L | 140 |
- Water Pump (Standard)
- Product Attributes:
- Outlet Quantity: N/a
- Water Pump Drive Type: Accessory Belt
- Fan Clutch Included: No
- Thermostat And Housing Included: No
- Timing Belt Driven: No
- Includes Back Housing: No
- Pulley Included: No
- Impeller Material: Stamped Steel
-
Features:
- Quality-assured with 100 percent leakage and functional tests of seals, bearings, castings and fully assembled water pump
- Fits and performs exactly to OE specifications and requirements
- Premium water pumps are designed to enhance the performance of the equivalent standard pump
- Backed by a limited lifetime warranty
- Gates Water Pumps are recognized in the industry for their durability, superior quality and are manufactured for worry-free operations for your vehicle. Every Gates high-quality new water pump is constructed with premium alloy materials and a 100 percent functional test of seals and bearings along with a 100 percent leakage test for both the casting and assembled water pump. Get industry best and a guaranteed OE-quality fit, with Gates.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2005 - Ford Escape | L | - | Main | FULL HYBRID EV-GAS (FHEV) | 4 Cyl 2.3L | 140 |
- Water Pump (Standard)
- Product Attributes:
- Outlet Quantity: N/a
- Water Pump Drive Type: Accessory Belt
- Fan Clutch Included: No
- Thermostat And Housing Included: No
- Timing Belt Driven: No
- Includes Back Housing: No
- Pulley Included: No
- Impeller Material: Stamped Steel
-
Features:
- Quality-assured with 100 percent leakage and functional tests of seals, bearings, castings and fully assembled water pump
- Fits and performs exactly to OE specifications and requirements
- Premium water pumps are designed to enhance the performance of the equivalent standard pump
- Backed by a limited lifetime warranty
- Gates Water Pumps are recognized in the industry for their durability, superior quality and are manufactured for worry-free operations for your vehicle. Every Gates high-quality new water pump is constructed with premium alloy materials and a 100 percent functional test of seals and bearings along with a 100 percent leakage test for both the casting and assembled water pump. Get industry best and a guaranteed OE-quality fit, with Gates.
This Part Fits the Following OEM/Substitute Numbers:
1-9216, 114112, 125-6000, 15LF01100, 18-1634, 1AMWP00035, 1S7G 8501 AK, 1S7G 8501 AL, 1S7G 8501 AM, 1S7G 8501 BC, 1S7G 8501 BD, 1S7G 8501 BE, 1S7G 8501 CB, 1S7Z 8501 A, 1S7Z 8501 AK, 1S7Z 8501 D, 1S7Z 8501 K, 20242...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2005 - Ford Escape | L | - | GAS | 4 Cyl 2.3L | 140 |
- W/O A.C.
- DriveAlign Premium OE Pulley
- Product Attributes:
- Contact Surface: V-ribbed Grooved
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 6
- Pulley 1 Outside Diameter (mm): 70
- Pulley 1 Flanged: Yes
- Bearing Bore Inside Diameter: 17
- Pulley 1 Width (mm): 25
- Material: Thermoplastic
-
Features:
- Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
- Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
- OE-quality fit for virtually every domestic or import vehicle on the road today
- Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
- Premium bearings eliminate bearing noise
- Mounting hardware included for some popular applications
- Reliable operation under severe conditions
- DriveAlign Idler Pulleys provide OE-quality fit to passenger cars and light trucks, performing as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley.
This Part Fits the Following OEM/Substitute Numbers:
10239670, 10239930, 11287509508, 12456152, 12550377, 12555423, 12555424, 12556612, 12559325, 12560344, 12561094, 12568181, 12569301, 12580296, 12580772, 12580774, 1753054L10, 1753054L11...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2005 - Ford Escape | L | - | GAS | 4 Cyl 2.3L | 140 |
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2005 - Ford Escape | L | - | GAS | 4 Cyl 2.3L | 140 |
Additional Fitment Information:
| Vehicle | Fuel Type |
|---|---|
| 2005 - Ford Escape | FULL HYBRID EV-GAS (FHEV) |
Showing 1 - 10 of 28 products
Loading...