Shop By Product Matching "Gates"
Choose your Submodel for your 2012 Ford F-350 Super Duty
Image
Product
Price
- Hydroboost System; Available Until Stock Depleted
- Pressure Line Assembly
This Part Fits the Following OEM/Substitute Numbers:
36-366205, 366205, 37835, 5-75153, 7-7277, 75153, 92762, BC3Z3A717J
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2012 - Ford F-350 Super Duty | V | 6210 | Pump To Hydroboost | FLEX | 8 Cyl 6.2L | 379 |
- Exhaust Gas Recirculation Inlet
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Modular Components Included: Tube
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 1048
- 41.25
- End 1 Inside Diameter:
- .7
- 18
- Material: Epdm, Aluminum, Steel
- Modular: Yes
- End 2 Inside Diameter:
- .7
- 18
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube
- synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
- Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
- Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates is the Automotive Aftermarket leader in the unique modular assembly coolant hose segment. Gates Modular Coolant Hose is manufactured to fit specific applications and are similar to OEM specifications to include specific essential integrated OE components such as hose branches, quick-connectors, sensors, restrictors, etc.
This Part Fits the Following OEM/Substitute Numbers:
52068, BC3Z 9F476 B, F11382
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Ford F-350 Super Duty | V | 6651 | DIESEL | 8 Cyl 6.7L | 406 |
- Gate Guardian Will Not Work With Power Up/Down Tailgate
- Gate Guardian Tailgate Lock;
- Gate Guardian Tailgate Lock
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: State Of California Consumers - Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
-
Features:
- Gate Guardian Tailgate Lock
- Dee Zee Gate Guardian – Theft deterrent for truck tailgates. Simply install in minutes with the tools included. Tamper resistant security screw.
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Ford F-350 Super Duty |
- TAILGATE MAT 99-16 FORD SUPERDUTY W/O FACTORY STEP GATE
- Without Tailgate Step
- BedRug Tailgate Mat;
- Product Attributes:
- Surface Preparation Required: Yes
- Install: No Drill, Hook & Loop
- Surface Configuration: Smooth
- Mounting Hardware Included: Yes
- Chemical Resistant: Yes
- Configuration: One Piece
- Mounting: Tailgate Area
- Impact Resistant: Yes
- Features and Benefits:
- 100% Polypropylene/ultra Tough Work Surface
- Bleach/battery Acid/oil And Gas Wash Right Off
- Custom Fit For Each Truck/wont Scratch Tailgate
- Designed For Exterior Use/will Not Absorb Water
- Installs In Minutes With Hook And Loop Fastener
- Limited Lifetime Warranty
- Looks And Feels Like Carpet
- Slip And Skid Resistant Fiber Surface
- Instruction Manual Included: Yes
- Category: Bedrug Tailgate Mat
- Paintable: No
- Drilling Required: No
-
Features:
- 100% Polypropylene/Ultra Tough Work Surface
- Get added protection with the BedRug Tailgate Mat. Works with either style, and easily installs with hook and loop fasteners. Provides cushion for the knees when accessing cargo in the truck bed.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2012 - Ford F-350 Super Duty | United States |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ford F-350 Super Duty | V | 6210 | 8 Cyl 6.2L | 379 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ford F-350 Super Duty | V | 6651 | 8 Cyl 6.7L | 406 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ford F-350 Super Duty | V | 6210 | 8 Cyl 6.2L | 379 |
- BEDRUG 08-16 FORD SUPERDUTY 6.5' SHORT BED WITH FACTORY STEP GATE
- 3/4 in. Thick Floor; 1/4 in. Thick Side Walls; Includes Bulkhead And Tailgate; w/Tailgate Step With Tailgate Step
- BedRug Complete Truck Bed Liner; 3/4 in. Thick Floor; 1/4 in. Thick Side Walls; Includes Bulkhead And Tailgate; w/Tailgate Step;
- Product Attributes:
- Surface Preparation Required: Yes
- Install: No Drill, Hook & Loop
- Mounting Hardware Included: Yes
- Chemical Resistant: Yes
- Configuration: Multi Piece
- Mounting: Under Bed Rail & Tailgate Area
- Impact Resistant: Yes
- Features and Benefits:
- 100% Polypropylene/ultra Tough Work Surface
- Bleach/battery Acid/oil And Gas Wash Right Off
- Custom Fit For Each Truck/wont Scratch Truck Bed
- Designed For Exterior Use/will Not Absorb Water
- Installs In Minutes With Hook And Loop Fastener
- Limited Lifetime Warranty
- Looks And Feels Like Carpet
- Slip And Skid Resistant Fiber Surface
- Bottom Configuration: Ribbed
- Instruction Manual Included: Yes
- Category: Bedrug Bedliner
- Paintable: No
- Tailgate Cover Included: Yes
- Drilling Required: No
- Extras: Includes Tailgate Mat
-
Features:
- If installing a BedRug over a spray-in bedliner, supplemental installation kit #BRZSPRAYON is required
- Made of 100 percent polypropylene, the BedRug bed liner protects your truck, and provides an ultra tough work surface. BedRug is water and stain resistant. Holds up to beach, oil, and even battery acid!
Additional Fitment Information:
| Vehicle | Region | Bed Length |
|---|---|---|
| 2012 - Ford F-350 Super Duty | United States | 81.8 |
- BEDRUG 08-16 FORD SUPERDUTY 8.0' LONG BED WITH FACTORY STEP GATE
- 3/4 in. Thick Floor; 1/4 in. Thick Side Walls; Includes Bulkhead And Tailgate; w/Tailgate Step With Tailgate Step
- BedRug Complete Truck Bed Liner; 3/4 in. Thick Floor; 1/4 in. Thick Side Walls; Includes Bulkhead And Tailgate; w/Tailgate Step;
- Product Attributes:
- Surface Preparation Required: Yes
- Install: No Drill, Hook & Loop
- Mounting Hardware Included: Yes
- Chemical Resistant: Yes
- Configuration: Multi Piece
- Mounting: Under Bed Rail & Tailgate Area
- Impact Resistant: Yes
- Features and Benefits:
- 100% Polypropylene/ultra Tough Work Surface
- Bleach/battery Acid/oil And Gas Wash Right Off
- Custom Fit For Each Truck/wont Scratch Truck Bed
- Designed For Exterior Use/will Not Absorb Water
- Installs In Minutes With Hook And Loop Fastener
- Limited Lifetime Warranty
- Looks And Feels Like Carpet
- Slip And Skid Resistant Fiber Surface
- Bottom Configuration: Ribbed
- Instruction Manual Included: Yes
- Category: Bedrug Bedliner
- Paintable: No
- Tailgate Cover Included: Yes
- Drilling Required: No
- Extras: Includes Tailgate Mat
-
Features:
- If installing a BedRug over a spray-in bedliner, supplemental installation kit #BRZSPRAYON is required
- Made of 100 percent polypropylene, the BedRug bed liner protects your truck, and provides an ultra tough work surface. BedRug is water and stain resistant. Holds up to beach, oil, and even battery acid!
Additional Fitment Information:
| Vehicle | Region | Bed Length |
|---|---|---|
| 2012 - Ford F-350 Super Duty | United States | 98.0 |
- BEDRUG 99-16 FORD SUPERDUTY 8.0' BED WITHOUT FACTORY STEP GATE
- 3/4 in. Thick Floor; 1/4 in. Thick Side Walls; Includes Bulkhead And Tailgate Without Tailgate Step
- BedRug Complete Truck Bed Liner; 3/4 in. Thick Floor; 1/4 in. Thick Side Walls; Includes Bulkhead And Tailgate;
- Product Attributes:
- Surface Preparation Required: Yes
- Install: No Drill, Hook & Loop
- Mounting Hardware Included: Yes
- Chemical Resistant: Yes
- Configuration: Multi Piece
- Mounting: Under Bed Rail & Tailgate Area
- Impact Resistant: Yes
- Features and Benefits:
- 100% Polypropylene/ultra Tough Work Surface
- Bleach/battery Acid/oil And Gas Wash Right Off
- Custom Fit For Each Truck/wont Scratch Truck Bed
- Designed For Exterior Use/will Not Absorb Water
- Installs In Minutes With Hook And Loop Fastener
- Limited Lifetime Warranty
- Looks And Feels Like Carpet
- Slip And Skid Resistant Fiber Surface
- Bottom Configuration: Ribbed
- Instruction Manual Included: Yes
- Category: Bedrug Bedliner
- Paintable: No
- Tailgate Cover Included: Yes
- Drilling Required: No
- Extras: Includes Tailgate Mat
-
Features:
- If installing a BedRug over a spray-in bedliner, supplemental installation kit #BRZSPRAYON is required
- Made of 100 percent polypropylene, the BedRug bed liner protects your truck, and provides an ultra tough work surface. BedRug is water and stain resistant. Holds up to beach, oil, and even battery acid!
Additional Fitment Information:
| Vehicle | Region | Bed Length |
|---|---|---|
| 2012 - Ford F-350 Super Duty | United States | 98.0 |
Showing 1 - 10 of 20 products
Loading...