Shop By Product Matching "Gates"
Choose your Engine for your 2013 Ford Escape
Image
Product
Price
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length: 254
- End 1 Inside Diameter:
- .59
- 15
- Material: Epdm
- End 2 Inside Diameter:
- .71
- 18
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
13515, CV6Z 18N345 U, F10662
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2013 - Ford Escape | L | 2488 | Valve To Radiator Hose (Upper) | GAS | 4 Cyl 2.5L | 152 |
- Installation Tool Required
- Premium OE Stretch Fit Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 34.25
- 870
- Instruction Manual Included: Sheet B
- Grade Type: Oe Exact
- Cross Section Designation: K
- Effective Length:
- 33.74
- 857
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (stretch Fit)
- Cord Material: Nylon
- Material: Epdm
- Installation Tools Requirements: Special Installation Tool
- Top Width:
-
Features:
- Specially formulated adhesive literally locks onto the cord, allowing the cord to elongate and stretch, but never lose tension
- Gates engineered tensile cord has the needed combination of strength and flexibility using advanced polyamide tensile cord
- Patented highly engineered EPDM belt ribs are extremely resistant to contamination, wear and pilling
- NOTE: Stretch Fit belts are single-use only and must be replaced if removed
- Gates Micro-V Stretch Fit Belts, with exclusive self-tensioning technology, fit like a glove and perform properly on unique stretch fit drive systems. Gates continues to add coverage to this growing market segment.
This Part Fits the Following OEM/Substitute Numbers:
25-040338SF, 4040351S, 4K338SF, CV6E 6C301 BA, CV6Z 8620 B, E040340, JK 4361A, PK040351, S040338
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2013 - Ford Escape | L | 2488 | Air Conditioning | GAS | 4 Cyl 2.5L | 152 |
- Interference engine application
- PowerGrip Premium OE Timing Belt
- Product Attributes:
- Top Width: .87
- Belt Material: Hsn
- Grade Type: Oe Exact
- Color: Black
- Timing Marks: No
- Pitch:
- .375
- 9.5
- Cog Quantity: 117
- Pitch Length:
- 1114
- 43.88
- Profile Type: Modified Curvilinear (iii)
- Type: Automotive Timing Belt
- Cord Material: Fiberglass
-
Features:
- PTFE-infused jackets to reduce frictional losses and tooth shear
- High-grade HNBR rubber for superior heat and contamination resistance
- Premium tensile members providing maximum strength
- Aramid-reinforced nylon jackets and backsides increase durability and lifetime
- Gates warranty matches the original manufacturer's timing belt replacement intervals – not just for parts – but also for labor and other associated costs
- Simply put, no one does Timing Belts with better design, or bigger market reach, than Gates. As a leading global manufacturer of OE timing belts, we've set the standard on creating aftermarket timing belts that meet or exceed OE standards of fit, function and performance. Resistant to heat, wear and contamination, Gates automotive timing belts have extensive coverage for millions of import (European and Asian) and domestic vehicles.
This Part Fits the Following OEM/Substitute Numbers:
1675963, 250343, 30750903, 31330410, 40343, 95343, 96MM 6K288 CA, BE8Z 6268 B, BE8Z 6268 C, BM5G 6K288 AA, CD343, T343, TB343
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Ford Escape | L | 1596 | GAS | 4 Cyl 1.6L | 97 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 1373
- 54.044
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1358
- 53.48
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
1040535, 1654203, 18-542K, 200724, 200766, 202701, 202748, 204818, 25-040535, 25-71354, 3040669, 4040535, 42850, 4K1360, 4K535, 4PK1355, 4PK1359, 4PK1360...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Ford Escape | L | 2488 | GAS | 4 Cyl 2.5L | 152 |
- W/150A. Alt.
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 1373
- 54.044
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1358
- 53.48
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Ford Escape | L | 1999 | GAS | 4 Cyl 2.0L | 122 |
- Water Pump (Standard)
- Product Attributes:
- Outlet Quantity: N/a
- Water Pump Drive Type: Accessory Belt
- Fan Clutch Included: No
- Thermostat And Housing Included: No
- Timing Belt Driven: No
- Includes Back Housing: No
- Pulley Included: No
- Impeller Material: Stamped Steel
-
Features:
- Quality-assured with 100 percent leakage and functional tests of seals, bearings, castings and fully assembled water pump
- Fits and performs exactly to OE specifications and requirements
- Premium water pumps are designed to enhance the performance of the equivalent standard pump
- Backed by a limited lifetime warranty
- Gates Water Pumps are recognized in the industry for their durability, superior quality and are manufactured for worry-free operations for your vehicle. Every Gates high-quality new water pump is constructed with premium alloy materials and a 100 percent functional test of seals and bearings along with a 100 percent leakage test for both the casting and assembled water pump. Get industry best and a guaranteed OE-quality fit, with Gates.
This Part Fits the Following OEM/Substitute Numbers:
1-9216, 114112, 125-6000, 15LF01100, 18-1634, 1AMWP00035, 1S7G 8501 AK, 1S7G 8501 AL, 1S7G 8501 AM, 1S7G 8501 BC, 1S7G 8501 BD, 1S7G 8501 BE, 1S7G 8501 CB, 1S7Z 8501 A, 1S7Z 8501 AK, 1S7Z 8501 D, 1S7Z 8501 K, 20242...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Ford Escape | L | 2488 | GAS | 4 Cyl 2.5L | 152 |
- DriveAlign Premium OE Pulley
- Product Attributes:
- Contact Surface: Smooth/backside
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 0
- Pulley 1 Outside Diameter (mm): 70
- Pulley 1 Flanged: No
- Bearing Bore Inside Diameter: 17
- Pulley 1 Width (mm): 26
- Material: Thermoplastic
-
Features:
- Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
- Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
- OE-quality fit for virtually every domestic or import vehicle on the road today
- Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
- Premium bearings eliminate bearing noise
- Mounting hardware included for some popular applications
- Reliable operation under severe conditions
- DriveAlign Idler Pulleys provide OE-quality fit to passenger cars and light trucks, performing as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley.
This Part Fits the Following OEM/Substitute Numbers:
04854089A, 06A903315D, 06A903315E, 06A903315F, 11281439062, 11287503427, 11287515866, 11287515867, 166200V010, 1662036030, 19189978, 1F2015980, 1L5Q 6A228 AB, 1L5Z 6B209 A, 1L5Z 6B209 AA, 231033, 231144, 23770AA05A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Ford Escape | L | 1596 | GAS | 4 Cyl 1.6L | 97 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ford Escape | L | 2488 | 4 Cyl 2.5L | 152 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ford Escape | L | 2488 | 4 Cyl 2.5L | 152 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 1569
- 61.787
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 1555
- 61.22
- Rib Quantity: 6
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
03L903137AC, 03L903137H, 06D903137F, 1011691, 1060613, 11281427250, 11281427260, 11281437368, 11281437929, 11281469266, 11281703561, 11281726689, 11287512970, 11287516181, 11287529738, 11287544786, 11287631818, 11287636378...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Ford Escape | L | 1596 | GAS | 4 Cyl 1.6L | 97 |
Showing 1 - 10 of 19 products
Loading...