Image
Product
Price
- Includes Cap/Rotor/Vacuum Advance; Iron Gear;CARB E.O. D-40-39 CARB E.O. D-40-38~If Replacing A GM HEI- A Blaster SS Coil & Coil Wire Are Required
- Ready-To-Run Distributor; Includes Cap/Rotor/Vacuum Advance; Iron Gear;
- Ready-To-Run Distributor
- Product Attributes:
- Distributor Type: Ready To Run
- Engine Make/Size:
- Chevy Big Block (396-454)
- Chevy Small Block (262-400)
-
Features:
- Simple and clean three wire installation
- Supplied w/An HEI Style Distributor Cap And Rotor
- Accepts Cap-A-Dapts
- Does not require an MSD Ignition Control
- CARB E.O. Approved
- Now includes built-in Rev Limiter
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
- Nylon pads ensure smooth operation of the advance weights
- Built-in module produces a 7.5 amp single spark through high rpm
- Easy-To-Adjust Mech. Advance w/Supplied Springs/Stop Bushings
- Vacuum advance canister for improved economy (can be locked out)
- The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEIs. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engines idle, improve starting and provide a much higher rpm range. The Ready-to-Run features MSDs adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engines needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice. Includes a separate tach circuit that is ideal to trigger an aftermarket EFI such as an Atomic EFI system.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Fuel Delivery Type | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1987 - Chevrolet G30 | V | - | 8 Cyl 5.7L | CARB | M | 350 |
- Includes Cap/Rotor/Vacuum Advance; Iron Gear;CARB E.O. D-40-39 If Replacing A GM HEI- A Blaster SS Coil and Coil Wire Are Required~CARB E.O. D-40-38
- Ready-To-Run Distributor; Includes Cap/Rotor/Vacuum Advance; Iron Gear;
- Ready-To-Run Distributor
- Product Attributes:
- Distributor Type: Ready To Run
- Engine Make/Size:
- Chevy Big Block (396-454)
- Chevy Small Block (262-400)
-
Features:
- Simple and clean three wire installation
- Supplied w/An HEI Style Distributor Cap And Rotor
- Accepts Cap-A-Dapts
- Does not require an MSD Ignition Control
- CARB E.O. Approved
- Now includes built-in Rev Limiter
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
- Nylon pads ensure smooth operation of the advance weights
- Built-in module produces a 7.5 amp single spark through high rpm
- Easy-To-Adjust Mech. Advance w/Supplied Springs/Stop Bushings
- Vacuum advance canister for improved economy (can be locked out)
- The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEIs. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engines idle, improve starting and provide a much higher rpm range. The Ready-to-Run features MSDs adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engines needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice. Includes a separate tach circuit that is ideal to trigger an aftermarket EFI such as an Atomic EFI system.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Fuel Delivery Type | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1987 - Chevrolet G30 | V | - | 8 Cyl 5.7L | FI | K | 350 |
- 3.5 mH Inductance; 42000 Max Voltage; 200mA Peak Current; 0.31 ohms Primary/9.2K ohms Secondary Resistance; 200 uS Spark Duration; 70:1 Turns Ratio; Black;CARB E.O. D-40-37 Recommend To Use w/HEAT HEI Module PN[83647]
- GM HEI Distributor Coil; 3.5 mH Inductance; 42000 Max Voltage; 200mA Peak Current; 0.31 ohms Primary/9.2K ohms Secondary Resistance; 200 uS Spark Duration; 70:1 Turns Ratio; Black;
- GM HEI Distributor Coil
- Product Attributes:
- Spark Duration: 200 Us
- WARNING CA Proposition 65: Yes
- Turns Ratio: 70:1
- Inductance: 3.5 Mh
- Maximum Voltage: 42000
- Peak Current: 200 Ma
- Primary Resistance: .310 Ohms
- Secondary Resistance: 9.2k Ohms
-
Features:
- Direct performance replacement for GM HEI coil-in-cap dist.
- 70:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Full Power Sparks To 9000 Rpm w/PN[83647] MSD HEI Module
- Recommended For Use w/MSD HEI Module PN[83647]
- CARB E.O. Approved
- HEI owners now have a choice to replace their stock coil with the MSD High Energy Unitized Coil for GM HEI Distributors. This coil is a direct replacement of the stock coil and offers increased spark energy when used with the MSD HEI Module, PN 83647.The MSD HEI Coil is designed for use with the MSD High Output HEI Module, PN 8364. It will work with stock ignition modules, but for maximum output use the MSD HEI Module.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1987 - Chevrolet G30 | V | - | 6 Cyl 4.3L | 262 |
- 3.5 mH Inductance; 42000 Max Voltage; 200mA Peak Current; 0.31 ohms Primary/9.2K ohms Secondary Resistance; 200 uS Spark Duration; 70:1 Turns Ratio; Black;CARB E.O. D-40-37 Recommend To Use w/HEAT HEI Module PN[83647]
- GM HEI Distributor Coil; 3.5 mH Inductance; 42000 Max Voltage; 200mA Peak Current; 0.31 ohms Primary/9.2K ohms Secondary Resistance; 200 uS Spark Duration; 70:1 Turns Ratio; Black;
- GM HEI Distributor Coil
- Product Attributes:
- Spark Duration: 200 Us
- WARNING CA Proposition 65: Yes
- Turns Ratio: 70:1
- Inductance: 3.5 Mh
- Maximum Voltage: 42000
- Peak Current: 200 Ma
- Primary Resistance: .310 Ohms
- Secondary Resistance: 9.2k Ohms
-
Features:
- Direct performance replacement for GM HEI coil-in-cap dist.
- 70:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Full Power Sparks To 9000 Rpm w/PN[83647] MSD HEI Module
- Recommended For Use w/MSD HEI Module PN[83647]
- CARB E.O. Approved
- HEI owners now have a choice to replace their stock coil with the MSD High Energy Unitized Coil for GM HEI Distributors. This coil is a direct replacement of the stock coil and offers increased spark energy when used with the MSD HEI Module, PN 83647.The MSD HEI Coil is designed for use with the MSD High Output HEI Module, PN 8364. It will work with stock ignition modules, but for maximum output use the MSD HEI Module.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1987 - Chevrolet G30 | V | - | 6 Cyl 4.3L | 262 |
- J Hook Hold Down; Red
- GM HEI Distributor Cap; J Hook Hold Down; Red;
- GM HEI Distributor Cap
- Product Attributes:
- Distributor Type: Gm
- WARNING CA Proposition 65: Yes
-
Features:
- Stock GM HEI replacement distributor cap
- Red
- Red, stock GM HEI distributor cap.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1987 - Chevrolet G30 | V | - | 8 Cyl 5.7L | 350 |
- J Hook Hold Down; Red
- GM HEI Distributor Cap; J Hook Hold Down; Red;
- GM HEI Distributor Cap
- Product Attributes:
- Distributor Type: Gm
- WARNING CA Proposition 65: Yes
-
Features:
- Stock GM HEI replacement distributor cap
- Red
- Red, stock GM HEI distributor cap.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1987 - Chevrolet G30 | V | - | 8 Cyl 5.7L | 350 |
- 8.5mm; Fits Engines w/Late-model Type HEI Distributor Caps; Includes [8] 90 Degree Boots/Terminal Ends; Red
- Universal Spark Plug Wire Set; 8.5mm; Fits Engines w/Late-model Type HEI Distributor Caps; Includes [8] 90 Degree Boots/Terminal Ends; Red;
- Universal Spark Plug Wire Set
- Product Attributes:
- Boot Type: 90 Degree
- Engine: Universal 8 Cylinder
-
Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Distributor Cap - Boots and Terminals Included
- Includes Mini-Stripper-Crimper For Factory Style Crimps
- Size Includes [8] 90 Degree Boots/Terminal Ends
- Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of people want to build their own so they can route them exactly how they see fit. Our Universal spark plug wire sets come with the Straight Multi-angle spark plug terminal and boot installed with the other end open. Distributor cap boots and terminals are included so you can cut the wire to the desired length, then install the terminal with the supplied Mini-Stripper-Crimper. Its a little more work, but in the end it will be worth it.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Fuel Delivery Type | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1987 - Chevrolet G30 | V | - | 8 Cyl 5.7L | FI | K | 350 |
- Black Super Conductor; 8.5mm; Fits 8 Cyl. Late Model HEI Caps [Ford Duraspark Or MSD Cap-A-Dapt]; Includes: Wires/90 Degree Boots/Terminals
- Universal Spark Plug Wire Set; Black Super Conductor; 8.5mm; Fits 8 Cyl. Late Model HEI Caps [Ford Duraspark Or MSD Cap-A-Dapt]; Includes: Wires/90 Degree Boots/Terminals;
- Universal Spark Plug Wire Set
- Product Attributes:
- Boot Type: 90 Degree
- Engine: Universal 8 Cylinder
- Engine Make/Size: Universal 8 Cylinder
-
Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Distributor Cap - Boots and Terminals Included
- Includes Mini-Stripper-Crimper
- Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of people want to build their own so they can route them exactly how they see fit. Our Universal spark plug wire sets come with the spark plug terminal and boot installed with the other end open. Distributor cap boots and terminals are included so you can cut the wire to the desired length, then install the terminal with the supplied Mini-Stripper-Crimper. Its a little more work, but in the end it will be worth it.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Fuel Delivery Type | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1987 - Chevrolet G30 | V | - | 8 Cyl 5.7L | FI | K | 350 |
- 8.5mm; Fits Engines w/Late-model Type HEI Distributor Caps; Includes [8] 90 Degree Boots/Terminal Ends; Black
- Universal Spark Plug Wire Set; 8.5mm; Fits Engines w/Late-model Type HEI Distributor Caps; Includes [8] 90 Degree Boots/Terminal Ends; Black;
- Universal Spark Plug Wire Set
- Product Attributes:
- WARNING CA Proposition 65: No
- Boot Type: Multi-angle
- Engine: Universal 8 Cylinder
- Engine Make/Size: Universal 8 Cylinder
-
Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Distributor Cap - Boots and Terminals Included
- Includes Mini-Stripper-Crimper For Factory Style Crimps
- Size Includes [8] 90 Degree Boots/Terminal Ends
- Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of people want to build their own so they can route them exactly how they see fit. Our Universal spark plug wire sets come with the spark plug terminal and boot installed with the other end open. Distributor cap boots and terminals are included so you can cut the wire to the desired length, then install the terminal with the supplied Mini-Stripper-Crimper. Its a little more work, but in the end it will be worth it.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1987 - Chevrolet G30 | V | - | 8 Cyl 5.7L | 350 |
- 8.5mm; Fits Engines w/Late-model Type HEI Distributor Caps; Includes [8] 90 Degree Boots/Terminal Ends; Red
- Universal Spark Plug Wire Set; 8.5mm; Fits Engines w/Late-model Type HEI Distributor Caps; Includes [8] 90 Degree Boots/Terminal Ends; Red;
- Universal Spark Plug Wire Set
- Product Attributes:
- Boot Type: 90 Degree
- Engine: Universal 8 Cylinder
-
Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Distributor Cap - Boots and Terminals Included
- Includes Mini-Stripper-Crimper For Factory Style Crimps
- Size Includes [8] 90 Degree Boots/Terminal Ends
- Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of people want to build their own so they can route them exactly how they see fit. Our Universal spark plug wire sets come with the Straight Multi-angle spark plug terminal and boot installed with the other end open. Distributor cap boots and terminals are included so you can cut the wire to the desired length, then install the terminal with the supplied Mini-Stripper-Crimper. Its a little more work, but in the end it will be worth it.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Fuel Delivery Type | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|---|
| 1987 - Chevrolet G30 | V | - | 8 Cyl 5.7L | CARB | Hi-Cube | M | 350 |
Showing 1 - 10 of 40 products
Loading...