Image
Product
Price
- Fuel Cap
- Vented Black Cap
- Standard
- Product Attributes:
- Vented: Yes
- Lockable: No
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10285948, 1078-290309, 10817, 10819, 10830, 10830D, 10834, 10834Y, 10837, 10869, 11817, 11830, 11834, 11834Y, 11837, 12335028, 12F46, 15001538...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Nissan Tsuru | L | 1597 | 4 Cyl 1.6L | 97 |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Nissan Tsuru |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Nissan Tsuru |
- PRO-TEC Spin-On Lube Filter
- Original Equipment Part Number 1520855Y0A; Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.234
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 340
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: None
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
This Part Fits the Following OEM/Substitute Numbers:
1361, 150, 21361, 21361MP, 31361, 397, 5001202796, 51361, 61361, 61361BP, 618-51361, 618-51361MP, 8-51361, 85361, 85361HD, AA3682, B4457, B4457MP...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Nissan Tsuru | L | 1597 | Mexico | 4 Cyl 1.6L | 97 |
- Stabilizer Bar Link Kit
- Product Attributes:
- Spacer Included: No
- Mounting Hardware Included: Yes
- Grade Type: Regular
- Bushing Color: Black
- Length: 173
- End 1 Type: Male Threaded
- Link Material: Steel
- Bushings Included: Yes
- Greaseable: No
- Bolt Thread Pitch: 1.25
- End 2 Type: Male Threaded
- Adjustable: No
- Locking Nuts Included: No
- Sleeve Included: No
- Weight: 0.59 Lb
- Bushing Material: Rubber
- Bolt Thread Size: 10
- Package Contents: 1 Stabilizer Bar Link; 2 Nuts; 2 Bushings; 2 Washers
- Bushing Inside Diameter: 10
- Washers Included: No
- End 1 Attachment Size : 10 Mm
- Bushing Outside Diameter: 25
- Threaded End: Yes
- Grease Fittings Included: No
- Pre-Greased: No
- Bolts Included: No
- Dust Boot Included: No
- Bearing Material: Polymer
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension stabilizer bar link kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1014383, 45G0047, 54618-58Y10, 5461858Y10, 606.42061, GK9826, JTS205, K9826, MK9826, SL-4745, SL274, SL4745, TC2183
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Nissan Tsuru | Rear |
- Suspension Ball Joint
- Product Attributes:
- Housing Press Fit Diameter: 39.3 Mm
- Mounting Hardware Included: Yes
- Package Contents: 1 Ball Joint; 1 Castle Nut; 1 Cotter Pin; 1 Snap Ring
- Mounting Hole Quantity: 0
- Castle Nut Included: Yes
- Greaseable: No
- Cotter Pin Hole: Yes
- Dust Boot Material: Rubber
- Attachment Type: Taper
- Adjustable: No
- Stud Thread Diameter: 14
- Suspension Grade Type: Standard
- Bolts/Studs Included: No
- Bearing Material: Polymer
- Mounting Type: Press
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension ball joint is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
40160-50Y00, 4016050Y00, 45D2194, 610.42006, FA2082, GK9449, JBJ181, K9449, MK9449, SB-4742, SK9449, TC1858
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Nissan Tsuru | Front Lower |
- Steering Tie Rod End
- Product Attributes:
- Grease Fitting Included: No
- Mounting Hardware Included: Yes
- Package Contents: 1 Tie Rod End; 1 Castle Nut; 1 Cotter Pin
- Length: 100
- End 1 Gender: Female
- Housing Material: Steel
- End 2 Gender: Male
-
Features:
- Trustworthy replacement - this steering tie rod end assembly directly replaces the original equipment on specific vehicle applications
- Durably designed - factory-sealed and precision-forged housing resists future corrosion
- Reliably engineered - built to decrease wear rate and ensure overall strength
- Trustworthy quality - backed by team of professional engineers and quality control specialists in the United States
- This steering tie rod end directly replaces the original equipment tie rod on specific vehicle applications. It has undergone an industry-leading evaluation process to ensure smooth, safe operation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1014534, 45A0436, 48520-50A00, 485202B003, 612.42013, ES2814, ES2814RL, GES2814RL, JTE266, MES2814RL, SE-4771, SES2971, TA1537
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Nissan Tsuru | Front Outer |
- Stabilizer Bar Link Kit
- Product Attributes:
- Spacer Included: No
- Mounting Hardware Included: Yes
- Grade Type: Regular
- Bushing Color: Black
- Length: 87
- End 1 Type: Male Threaded
- Link Material: Steel
- Bushings Included: Yes
- Greaseable: No
- Bolt Thread Pitch: 1.25
- End 2 Type: Male Threaded
- Adjustable: No
- Locking Nuts Included: No
- Sleeve Included: No
- Weight: 0.59 Lb
- Bushing Material: Rubber
- Bolt Thread Size: 10
- Package Contents: 1 Suspension Stabilizer Bar; 2 Washers; 2 Bushings; 2 Nuts; 1 Zerk Fitting
- Bushing Inside Diameter: 10
- Washers Included: No
- End 1 Attachment Size : 10 Mm
- Bushing Outside Diameter: 25.8
- Threaded End: Yes
- Grease Fittings Included: Yes
- Pre-Greased: No
- Bolts Included: No
- Dust Boot Included: No
- Bearing Material: Polymer
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension stabilizer bar link kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1014377, 4056A038, 4242060A00, 4242065D00, 45G0030, 54618-D5010, 546180B000, 5483036000, 606.42000, GK8643, JTS199, K750181, K750201, MB573540, MK8643, SL-4740, SL241, SL264...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Nissan Tsuru | Front |
- R-Line
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
084-1034, 105396, 105396-10, 13210, 13301916, 14071826, 18029799, 1K0615273A, 22069, 22687789, 4112821010, 41128880, 41128AW70A, 41128P6500, 41128V5510, 4353210, 447615273, 45215671672...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Nissan Tsuru | Front |
- Blower Motor Module Connector
- Product Attributes:
- California Proposition 65: Warning: This Product Contains A Chemical Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm.
- Connector Gender: Female
- Terminal Type: Blade
- Connector Shape: Rectangular
- Terminal Gender: Female
- Terminal Quantity: 4
- Wire Quantity: 4
- Offering hundreds of high-quality pigtails & sockets for nearly every electrical job. Utilizing high grade materials to ensure peak conductivity and perfect connections. Decades of industry leading research and development focused on meeting the technician's needs. With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1157, 1170, 1P1388, 1P1789, 1P1802, 37257, 57-5167, 57-5570, 57-5583, 5U2Z14S411RA, 645-701, 645-714, 88987868, EC1016, PT1017, PT1708, PTC1099, WPT858...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Nissan Tsuru |
Showing 1 - 10 of 22 products
Loading...