This amazing oval oblong designed flush mount auxiliary light has an outstanding Flood beam pattern and is a great solution for a sleek fitment or design. The 5. 5 inch LED light lens is recessed and sealed within a 7. 25 inch flush mount flange and can be mounted inside the cut out in which the heat sink of the light is behind the surface and only the lens of the light shows above the surface. If this solution is what fits the bill, look no further. Specifications: 1500 lm Raw Lumens. 2800 lx MAX LUX @ 1'. Heavy Duty design. Black Powder Coated. Die Cast Aluminum Housing. Polycarbonate Lens. Oval Oblong Design - 7. 28 inches wide x 2. 37 inches height (Lens length with LED's is 5. 5 inches wide). 9-32VDC Input. 18 Watts. 82A Current Draw. IP67 Water and Dust Resistant and lab tested. 2-hole Screw Mounting. Chrome Reflective Lens area. 2-Wire Power Cable (Power and Ground). NOTE - Surface Cut-out for heat sink must at least be 6. 25 inches x 1. 75 inches rectangle
7.5 inch Oval Flush Mount Mini LED Flood Beam Auxiliary Light 10-30VDC
General
AAP_UDA_12
Ea
AAP_UDA_22
1
AAP Selling Package Quantity UOM
Ea
Freight Class
65
Wattage
18-watts
AAP Selling Package Quantity
1
IP Rating
Ip67
Prop 65 - Short Label
Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Prop 65 - Long Label
Prop 65 Warning: This Product Can Expose You To Chemicals, Which Are Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
Estimated Install Time
0.5 Hours
Operating Voltage
9-32vdc
LUX
15,000lx
AAP_UDA_4
65
Reverse Polarity Protection
Yes
Warranty
3 Year
Prop 65 Warning Label
Warning - Both Cancer And Reproduction.tif
Kelvin (Color Temperature)
5,500k
Current Draw
0.5-2.0a
Chip Type
Cree
Prop 65 (C, R or CR)
Cr
Warranty Process
Https://www.racesportinc.com/rma
Life Expectancy
30,000 Hours
Packaging
package quantity
1
length
8.13 in
width
2.25 in
height
2.50 in
weight
0.55 lb
Information on technical characteristics, the delivery set, the country of manufacture and the appearance
of the goods is for reference only and is based on the latest information available at the time of publication.