2022 Ford Addictive Desert Designs Parts
Choose a Model for your 2022 Ford
Image
Product
Price
- Hammer Black Powder Coat Finish; 20 In. Light Bar
- Ford F150 2021 - Up ADD Pro Bolt-On Front Bumper With Mounts For 20" Universal Light Bar in Hammer Black with Satin Black panels
- PRO Bolt-On Front Bumper
-
Features:
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Universal Light Mount Up To 6 Cube Lights Or 20 In. Light Bar
- The Pro-Bolt On Front Bumper for the 2021+ Ford F-150 is our slimmest fitting bumper, and was designed in a prerunner style. The main radius .120-inch wall steel tube closely follows the contours of the front end and sits flush with the grille/valance. It features an 1/8-inch aluminum skid plate that is vented to ensure proper airflow reaches the OEM intercooler. This bumper allows you to keep the intercooler in its original position.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine Designation | Fuel Type | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|---|---|---|
| 2022 - Ford F-150 | V | 3496 | Front | 998 | GAS | 6 Cyl 3.5L | XL | 8 | 213 |
- Hammer Black; Skid Color Satin Black; Mount 20 in. Radius LED or 5 Cube Lights; Low Profile Top Hoop
- Ford Bronco 2021 - Up Rock Fighter Front Bumper with mounts for a universal 20" radius light bar and with mounts for cube lights in sides with Parking Sensor cutouts in Hammer Black with Satin Black panels
- Rock Fighter Front Bumper
- Product Attributes:
- Bumper Style: Light Mount
-
Features:
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Finish Panels
- Low Profile Top Hoop
- Mount For 20 in. Radius LED or 5 Cube Lights
- Parking Sensor Cutouts
- Designed with heavy trail use in mind, this bumper features high clearance and approach angles. At the center of the bumper is a universal light mount ready for up to a 20-inch radius light bar, or 5 cube lights. There are two light mounts for round lights on top, on either side of the low profile top hoop and standard winch mount.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2022 - Ford Bronco | V | - | Front | 6 Cyl 2.7L | Black Diamond | 164 |
- Hammer Black; Skid Color Satin Black; Mount For Three Baja Designs LP4 Lights
- Ford Bronco 2021 - Up Bomber Front Bumper with D-Rings with 3 Baja Designs LP4 Mounts and Dually Mounts on Sides in Hammer Black with Satin Black panels
- Bomber Front Bumper
- Product Attributes:
- Bumper Style: Baja
-
Features:
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Mounts For Three Baja Designs Lp4 Lights
- Mounts For Cube Lights On Sides
- Parking Sensor Cutouts
- The Bomber is a tight fitting front bumper for the new Bronco. At the center of the bumper, is a satin black aluminum panel that frames 3 mounting points for Baja Designs LP4 lights. At the sides of the bumper are mounting points for cube lights. The Bomber is constructed from modern plate steel, finished in a hammer black powder coat. The aluminum panels are finished in a satin black powder coat.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2022 - Ford Bronco | L | 2300 | Front | 4 Cyl 2.3L | Outer Banks | 140 |
- Hammer Black; with Satin Black Panels; Mounts For Three Rigid 360 6 in.
- Ford Bronco 2021 - Up Bomber Front Bumper with D-Rings with 3 Rigid 360 Mounts and Dually Mounts on Sides in Hammer Black with Satin Black panels
- Bomber Front Bumper
- Product Attributes:
- Bumper Style: Light Mount
-
Features:
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Mounts For Three Rigid 360 6 in. Lights
- Mounts For Cube Lights On Sides
- Parking Sensor Cutouts
- The Bomber is a tight fitting front bumper for the new Bronco. At the center of the bumper, is a satin black aluminum panel that frames 3 mounting points for Rigid 360 6-inch lights. At the sides of the bumper are mounting points for cube lights. The Bomber is constructed from modern plate steel, finished in a hammer black powder coat. The aluminum panels are finished in a satin black powder coat.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2022 - Ford Bronco | V | - | Front | 6 Cyl 2.7L | Badlands | 164 |
- Hammer Black Powder Coat Finish; Mounts For 3 Baja LP4 Lights
- Ford Bronco Raptor 2022 - up Bomber Front Bumper 3 Baja Designs LP4 Mounts and Dually Mounts on Sides in Hammer Black with Satin Black panels
- Bomber Front Bumper
-
Features:
- Hammer Black
- Satin Black
- Center Mount 20 In. Radius Light Bar
- Up To 6 Cube Light
- Universal Mount
- The Bomber is a tight fitting front bumper for the Bronco Raptor. At the center of the bumper, is a satin black aluminum panel that frames 3 mounting points for Baja Designs LP4 lights. At the sides of the bumper are mounting points for cube lights. The Bomber is constructed from modern plate steel, finished in a hammer black powder coat. The aluminum panels are finished in a satin black powder coat.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2022 - Ford Bronco | V | 2956 | Front | 6 Cyl 3.0L | Raptor | 181 |
- Hammer Black Powder Coat Finish; Mounts For 3 RIGID 360 6 In. Lights
- Ford Bronco Raptor 2022 - up Bomber Front Bumper 3 Rigid 360 Mounts and Dually Mounts on Sides in Hammer Black with Satin Black panels
- Bomber Front Bumper
-
Features:
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Mounts For 3 RIGID 360 6 In. Lights
- Mounts For Cube Lights On The Side
- The Bomber is a tight fitting front bumper for the Bronco Raptor. At the center of the bumper, is a satin black aluminum panel that frames 3 mounting points for Rigid 360 6-inch lights. At the sides of the bumper are mounting points for cube lights. The Bomber is constructed from modern plate steel, finished in a hammer black powder coat. The aluminum panels are finished in a satin black powder coat.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2022 - Ford Bronco | V | 2956 | Front | 6 Cyl 3.0L | Raptor | 181 |
- Hammer Black; Panel Color Satin Black
- 2021 - Up Ford Raptor Stealth Fighter Rear Bumper
- Stealth Fighter Rear Bumper
- Product Attributes:
- Bumper Style: Light Mount
-
Features:
- Bumper Color: Hammer Black
- Panel Color: Satin Black
- 2 Universal Cube Light Mounts
- Retains Parking Sensors
- The Stealth Fighter Raptor Rear Bumper follows the body lines of your Raptor and complements the factory dovetail style. Constructed from modern radius plate steel, it has recessed, satin black powder coated aluminum panels to cut down on weight. Behind these two panels are mounting points for rear facing LED cube lights for supplemental lighting at the rear of the truck. The Stealth Fighter measures the same length from your tailgate, and provides superior protection over the factory rear bumper. This bumper's design retains the OEM tow hitch, tow hooks, and dual exhaust. Sensor cut-outs allow you to retain the full functionality of your factory parking sensors. Two integrated license plate lights are included with the bumper.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - Ford F-150 | Rear | Raptor |
- Hammer Black; with Satin Black Panels; Mounts For 3 Baja Designs LP6
- Ford Raptor 2021 - Up Bomber Front Bumper 3 Baja Designs LP6 Mounts and Dually Mounts on Sides in Hammer Black with Satin Black panels
- Bomber Front Bumper
- Product Attributes:
- Bumper Style: Baja
-
Features:
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Mounts For 3 Baja Designs Lp6 Round Lights
- Mounts For Cube Lights On Sides
- Parking Sensor Cutouts
- Constructed from plate steel and lightweight aluminum panels, the Bomber provides protection to your truck's front end without compromising clearance. The 3/16-inch aluminum skid plate helps to ensure that the Bomber is lighter than the OEM bumper.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|---|---|
| 2022 - Ford F-150 | V | 3496 | Front | GAS | 6 Cyl 3.5L | Raptor | G | 213 |
- Hammer Black; Panel Color Satin Black
- Ford Raptor 2021 - Up Stealth Fighter Front Bumper with D-Ring Clevis Mounts with Universal 40" Light Mount and 10" Light Mounts on the Sides in Hammer Black with Satin Black panels
- Stealth Fighter Front Bumper
- Product Attributes:
- Bumper Style: Light Mount
-
Features:
- Bumper Color
- Hammer Black
- Satin Black
- Universal Plate/10 Dually
- 10 in. Led
- The Stealth Fighter Front Bumper was designed to closely follow the Raptor's body lines, and provides better ground clearance and approach angles than the OEM bumper. The front of the bumper sticks out only 1/2-inch further than the OEM bumper in order to fit LED lights within. The center light mount can accommodate either a 40-inch radius LED light bar, or up to 10 LED cube lights. There are 2 side mounts for Rigid 10-inch SR LED light bars on either side of the bumper for additional lighting.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|---|---|
| 2022 - Ford F-150 | V | 3496 | Front | GAS | 6 Cyl 3.5L | Raptor | G | 213 |
- Hammer Black Powder Coat Finish; 20 In. Universal Light Bar
- Ford Bronco 2021 - Up ADD Pro Bolt on Front Bumper with mounts for 5 Cube Lights or 20" Universal Light Bar in Hammer Black with Satin Black panels
- PRO Bolt-On Front Bumper
-
Features:
- Hammer Black Powder Coat Finish
- Satin Black Powder Coat Panel Finish
- Universal Light Mount For Up To 5 Cube Lights Or 20 In. Universal Light Bar
- Optional Light Hoop
- The ADD PRO Bolt-On Front Bumper for the 2021+ Ford Bronco was designed with the lowest profile fitment possible. The upper radius .120-inch wall steel tube follows the contours of the front end, and is joined to steel plating and steel tubing towards the middle. An 1/8-inch vented aluminum skid plate extends towards the undercarriage to provide protection below, and ensures proper airflow to the intercooler. The Pro Bolt-On features universal light mounts that can take a 20-inch LED light bar, or 5 cube lights. Factory parking sensors are integrated into the design and retain full functionality. There is an available ADD PRO Bolt-On Light Hoop for additional lighting. The hoop can mount four 6-inch round lights. Manufactured from the same .120-inch steel wall tubing, the hoop maintains the same low-profile fitment as the rest of the bumper. As always, this bumper is fully bolt-on and Made in America.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2022 - Ford Bronco | L | 2300 | Front | 4 Cyl 2.3L | Everglades | 140 |
Showing 1 - 10 of 38 products
Loading...