2023 Addictive Desert Designs Parts

Choose a Make for your 2023 vehicle


Showing 1 - 10 of 66 products
Image
SKU
Product
Rating
Price

Addictive Desert Designs
  • Hammer Black
  • Adaptive Speed Control Bracket; Hammer Black;
  • Adaptive Speed Control Bracket
  • Features:
    • Hammer Black Powder Coat Finish
  • This bracket was designed to relocate the Adaptive Cruise Control sensor behind the grille to make room for your ADD Offroad Bronco Front Bumper. This bracket could also be used for other aftermarket front bumpers; but why would you want to buy anything but American Made ADD bumpers for your Bronco??

Additional Fitment Information:
Vehicle
2023 - Ford Bronco

Addictive Desert Designs
  • Hammer Black Powder Coat Finish; 20 In. Light Bar
  • PRO Bolt-On Front Bumper; Hammer Black Powder Coat Finish; 20 In. Light Bar;
  • PRO Bolt-On Front Bumper
  • Features:
    • Hammer Black Powder Coat Finish
    • Satin Black Powder Coat Panel Finish
    • Universal Light Mount Up To 6 Cube Lights Or 20 In. Light Bar
  • The Pro-Bolt On Front Bumper for the 2021-2023 Ford F-150 is our slimmest fitting bumper and was constructed in a prerunner style, giving your truck a serious but stylish look. Constructed with a heavy-duty .120-inch wall steel tube that fits right up against the grille/valance area, you'll get plenty of protection while keeping drag and weight down. An included 1/8-inch aluminum skid plate is vented to ensure maximum airflow reaches your intercooler & radiator, leaving it running cooler even as speed picks up. Plus, its design allows you to keep the intercooler in its original position so you can keep your overall setup simple and efficient. At the center of the bumper is a universal light mount with a couple of lighting options. Up to 6 cube lights, or a 20-inch radius LED light bar can be mounted here. The lights are protected from impact by the lower steel tube & skid plate, as well as side steel plating. As always, this F-150 bumper is fully bolt-on and Made in America.

Additional Fitment Information:
Vehicle Block CC Position Engine Designation Fuel Type Engine Sub Model Engine VIN CID
2023 - Ford F-150 V 3496 Front 99D FULL HYBRID EV-GAS (FHEV) 6 Cyl 3.5L XLT D 213

Addictive Desert Designs
  • Hammer Black Powder Coat Finish; Mounts For Two 10 In. SR
  • Phantom Front Bumper; Hammer Black Powder Coat Finish; Mounts For Two 10 In. SR;
  • Phantom Front Bumper
  • Features:
    • Hammer Black Powder Coat Finish
    • Satin Black Powder Coat Panel Finish
    • Mount For 20 In. RDS
    • Mounts For Two 10 In. SR
  • The new Phantom line of ADD bumpers are the perfect way to give your Raptor or Raptor R a unique, stylish look. This low-profile 3rd gen Raptor front bumper features a prerunner inspired arrangement. The aggressive contours and sleek design of the Phantom are sure to set your truck apart from the rest. The bumper is constructed from plate steel for a more enhanced style, rather than the traditional tube steel. It features a knife's edge design that mimics the look of trailing arms, and a lightweight 3/16-inch aluminum skid plate that provides full protection without adding excess weight. The skid plate also has vented cutouts for proper intercooler air flow, making it the perfect choice for those who want style and function. The Phantom has several lighting options, including a central 20-inch radius light bar mount and 10-inch SR light mounts behind each side panel. The bumper features sensor mounts to retain full functionality of the parking sensors. An Adaptive Cruise Control relocation bracket is required for installation, however the intercooler does not need to be moved for proper fitment. As always, this is fully bolt-on and Made in America.

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine Sub Model Engine VIN CID
2023 - Ford F-150 V 3496 Front GAS 6 Cyl 3.5L Raptor G 213

Addictive Desert Designs
  • Hammer Black Powder Coat Finish; 20 In. Universal Light Bar
  • PRO Bolt-On Front Bumper; Hammer Black Powder Coat Finish; 20 In. Universal Light Bar;
  • PRO Bolt-On Front Bumper
  • Features:
    • Hammer Black Powder Coat Finish
    • Satin Black Powder Coat Panel Finish
    • Universal Light Mount For Up To 5 Cube Lights Or 20 In. Universal Light Bar
    • Optional Light Hoop
  • The ADD PRO Bolt-On Front Bumper for the 2021-2023 Ford Bronco was designed with the lowest profile fitment possible without having to cut your frame. The upper radius .120-inch wall steel tube tightly follows the contours of the front end, and is joined to steel plating and additional steel tubing at the middle of the bumper. An 1/8-inch vented aluminum skid plate extends towards the undercarriage to provide protection below. The venting in the skid plate ensures proper airflow to the intercooler. Our Pro Bolt-On Bronco Bumper features universal light mounts that can take a 20-inch LED light bar, or 5 cube lights at the center of the bumper. Factory parking sensors are integrated into the design and retain full functionality.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
2023 - Ford Bronco L 2300 Front 4 Cyl 2.3L Heritage Edition 140

Addictive Desert Designs
  • Hammer Black Powder Coat Finish
  • Rock Fighter Rear Bumper; Hammer Black Powder Coat Finish;
  • Rock Fighter Rear Bumper
  • Features:
    • Hammer Black Powder Coat Finish
    • Parking Sensor Cutouts
  • The Rock Fighter Rear Bumper is the perfect addition for those looking to enhance their Bronco Raptor. With a low profile and sleek design, it's designed with contours engineered to flow seamlessly with the rear end - including the large Raptor fender flares. The modern plate steel construction guarantees durability even whether you're crawling rocks on the trail, or racing through the desert. In addition, you don't have to worry about sacrificing any convenience features: its design allows for compatibility with the factory-installed tire mount, backup camera, parking sensors, and license plate light. We've also incorporated two reinforced clevis mounts accept soft shackles for maximum recovery options in case of an emergency. The Rock Fighter can be installed with or without the factory mud flaps. As always, this is fully bolt-on and Made in the USA.

Additional Fitment Information:
Vehicle Position Sub Model
2023 - Ford Bronco Rear Raptor

Addictive Desert Designs
  • Hammer Black; Panel Color Satin Black
  • Stealth Fighter Front Bumper; Hammer Black; Panel Color Satin Black;
  • Stealth Fighter Front Bumper
  • Product Attributes:
    • Bumper Style: Light Mount
  • Features:
    • Hammer Black Powder Coat Finish
    • Satin Black Powder Coat Panel Finish
    • Mount For 40 in. Radius Light Bar Or 10 Cube Lights
    • Mounts For Cube Lights On Sides
  • Addictive Desert Designs is proud to bring the Stealth Fighter line of bumpers to the 2020 Ram 2500/3500 platform. A radius plate steel design allows the bumper to stay tight to the front of the truck. Our universal light mount system in the center of the bumper allows the use of a 40 in. radius light bar or up to 10 cube lights. There is an additional cube light mount behind each side panel. Standard cutouts allow this bumper to retain OEM parking sensors. The Stealth Fighter comes standard with a w in. mount that bolts directly to the vehicle's frame for greater strength. Access holes in the top of the bumper ensure maximum w in. functionality. Our clevis mounts also provide a reinforced mounting point for 3/4 in. D-rings. As always this product is fully bolt-on and made in America.

Additional Fitment Information:
Vehicle Position
2023 - Ram 2500 Front

Addictive Desert Designs
  • Hammer Black Powder Coat Finish
  • Cruise Control Bracket; Hammer Black Powder Coat Finish;
  • Cruise Control Bracket
  • Features:
    • Satin black powder coat
  • Relocates your adaptive cruise control module on your Ford F-150 to be compatible with all Addictive Desert Designs front bumpers.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2023 - Ford F-150 V 3496 6 Cyl 3.5L Platinum 213

Addictive Desert Designs
  • Hammer Black Powder Coat Finish
  • Stealth Fighter Rear Bumper; Hammer Black Powder Coat Finish;
  • Stealth Fighter Rear Bumper
  • Features:
    • Hammer Black Powder Coat Finish
    • Mid Width Rear Bumper
    • Retains OEM Parking Sensors
    • Retains OEM License Plate Lights
  • Sleek, tough, and ready to take on anything, the 3rd Gen Tundra Stealth Fighter Rear Bumper is perfect for anyone who wants to add a little extra edge to their truck. With its mid-width design and integrated light pod mounts, this bumper is sure to turn heads no matter where you go. It's finished in a hammered black powder coat with satin black aluminum accent panels for a touch of rugged sophistication. We've integrated the factory reverse and license plate lights seamlessly into its design. The bumper retains Factory Blind Spot Detection and OEM Backup Sensor Functionality, so you can drive with confidence knowing that your safety is always our top priority. No cutting of the body panels is required for installation. The factory hitch & receiver fit perfectly with the bumper and function as intended. As always, this is fully bolt-on and Made in the USA.

Additional Fitment Information:
Vehicle Position
2023 - Toyota Tundra Rear

Addictive Desert Designs
  • Backup Sensor Cutouts
  • Stealth Fighter Rear Bumper; Backup Sensor Cutouts;
  • Stealth Fighter Rear Bumper
  • Product Attributes:
    • Bumper Style: Light Mount
  • Features:
    • Backup Sensor Cutouts
    • Hammer Black Powder Coat Finish
    • Satin Black Powder Coat Panel Finish
    • Mounts For Cube Lights
  • Addictive Desert Designs Jeep Gladiator Stealth Fighter rear bumper is one of the slimmest bumpers on the market. The low profile plate steel design provides a unique style without adding bulk or size to the Gladiator.

Additional Fitment Information:
Vehicle Position Sub Model
2023 - Jeep Gladiator Rear Sport S

Addictive Desert Designs
  • Top Hoop; Hammer Black; Panel Color Satin Black; Mount For 20 in. Light Bar In Center; Mount 30 in.Radius Light Bar In Top Hoop
  • HoneyBadger Front Bumper; Top Hoop; Hammer Black; Panel Color Satin Black; Mount For 20 in. Light Bar In Center; Mount 30 in.Radius Light Bar In Top Hoop;
  • HoneyBadger Front Bumper
  • Product Attributes:
    • Bumper Style: Light Mount
  • Features:
    • Fits Sensor And Non-Sensor Trucks
    • Hammer Black Powder Coat Finish
    • Satin Black Powder Coat Panel Finish
    • Mount For 20 in. Light Bar In Center
    • Mount For 30 in. Radius Light Bar On Top
    • Mount For Cube Lights On Sides
  • The newly redesigned Addictive Desert Designs HoneyBadger Front Bumper keeps the same rugged styling as the original but with a low-profile fitment. There is an optional top hoop, but either configuration has room to mount a radius 30 in. light bar on top of the bumper. The center of the bumper houses a straight 20 in. light bar, and two cube lights can be mounted behind the side panels. The HoneyBadger comes in hammer black powder coat with satin black panels. OEM amenities, such as parking sensors and tow hooks, are retained. Even though it is an aftermarket front bumper, the HoneyBadger follows the bodylines perfectly, making the front of your Ford F-150 look unique without sacrificing quality. As always this product is fully bolt-on and made in America.

Additional Fitment Information:
Vehicle Block CC Position Engine Designation Fuel Type Engine Sub Model Engine VIN CID
2023 - Ford F-150 V 3496 Front 998 GAS 6 Cyl 3.5L King Ranch 8 213
Showing 1 - 10 of 66 products

Loading...