Image
Product
Price
- ACT Heavy Duty Clutch Pressure Plate
- Heavy Duty Pressure Plate
- Heavy Duty Pressure Plate
- Product Attributes:
- Diameter:
- 212
- 8.3
- Counterweight Assist: No
- Grade Type: Performance
- SFI: 1.1
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Product Weight (lbs.):
- 10.1
- 10.3
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Diameter:
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- H021 pressure plate features an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All ACT diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Heavy Duty pressure plates increase clamp load by 20 to 50 percent. The Heavy Duty pressure plates are recommended for use with a street or race disc.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2009 - Honda S2000 | L | 2157 | DOHC | 4 Cyl 2.2L | CR | - |
- ACT XACT Prolite Clutch Flywheel
- XACT Flywheel Prolite
- XACT Flywheel Prolite
- Product Attributes:
- Friction Surface Diameter:
- 215
- 8.5
- Engine Balance: Internal
- Grade Type: Performance
- Mounting Hardware Included: No
- Mounting Hole Quantity: 8
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- SFI Rating: 1.1
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Friction Surface Configuration: Raised
- Tooth Quantity: 119
- SFI: 1.1
- Replaceable Friction Surface: No
- Product Weight (lbs.):
- 7.8
- 8.5
- Weight: 7.8
- Friction Surface Diameter:
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 600125 is a Prolite flywheel, which is ACT's lighter flywheel offering with lowest inertia. Prolite flywheels are designed for best throttle response and acceleration. Prolite flywheels are preferred for road racing or rally racing, and have reduced drivability. Materials are properly distributed for maximum strength, good heat tolerance and rigidity. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2009 - Honda Civic | L | 1998 | K20Z3 | 4 Cyl 2.0L | Si | 122 |
- ACT XACT Streetlite Clutch Flywheel
- XACT Flywheel Streetlite
- XACT Flywheel Streetlite
- Product Attributes:
- Friction Surface Diameter:
- 215
- 8.5
- Engine Balance: Internal
- Grade Type: Performance
- Mounting Hardware Included: No
- Mounting Hole Quantity: 8
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- SFI Rating: 1.1
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Friction Surface Configuration: Raised
- Tooth Quantity: 119
- SFI: 1.1
- Replaceable Friction Surface: No
- Product Weight (lbs.): 11.4
- Weight: 11.4
- Friction Surface Diameter:
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 600295 is a Streetlite flywheel, which is considerably lighter than stock and is the most durable flywheel offering from ACT. Materials are properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity. ACT's Streetlite flywheels are preferred for street or drag racing. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.
This Part Fits the Following OEM/Substitute Numbers:
2-800-ST, 565004, FW-037-SF, HF02, SA74A
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2009 - Honda Civic | L | 1998 | K20Z3 | 4 Cyl 2.0L | Si | 122 |
- ACT Heavy Duty Performance Street Sprung Clutch Kit
- HD/Perf Street Sprung
- HD/Perf Street Sprung
- Product Attributes:
- Torque Capacity Over OE: 35%
- Torque Capacity (ft/lbs.): 255
- Grade Type: Performance
- Pilot Bearing Included: No
- Alignment Tool Included: Yes
- Disc Material: Organic
- Pilot Bushing Included: Yes
- Input Shaft Diameter: 1.03125
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Disc Type Sprung Solid: Sprung
- Flywheel Bolts Included: No
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Input Spline Quantity: 24
- Pressure Plate Bolts Included: No
- Grease Included: Yes
- Clutch Slave Cylinder Included: No
- Pressure Plate Type: Heavy Duty
- Release Bearing Included: Yes
- Clutch Master Cylinder Included: No
- Product Weight (lbs.):
- 11
- 11.0
- Clutch Disc Diameter:
- 214
- 8.4
- Flywheel Included: No
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- AR1-HDSS kit features ACT's most popular Heavy Duty pressure plate and most popular street disc. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Performance Street discs feature premium organic materials with high copper content for better heat transfer and steel-backed lining for greater burst strength and durability. These discs have reduced marcel for faster shift action to complement ACT pressure plates, with increased strength and reliability.
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2009 - Honda Civic | L | 1998 | K20Z3 | 4 Cyl 2.0L | Si | 122 |
- ACT Heavy Duty Clutch Pressure Plate
- Heavy Duty Pressure Plate
- Heavy Duty Pressure Plate
- Product Attributes:
- Diameter:
- 212
- 8.3
- Counterweight Assist: No
- Grade Type: Performance
- SFI: 1.1
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Product Weight (lbs.):
- 10.1
- 10.3
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Diameter:
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- H021 pressure plate features an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All ACT diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Heavy Duty pressure plates increase clamp load by 20 to 50 percent. The Heavy Duty pressure plates are recommended for use with a street or race disc.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2009 - Honda S2000 | L | 2157 | DOHC | 4 Cyl 2.2L | CR | - |
- ACT Clutch Pilot Bearing
- Pilot Bearing
- Pilot Bearing
- Product Attributes:
- Grade Type: Regular
- Bearing Shape: Round
- Width:
- 0.276
- 7.00
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Part Fitment Requirement: Must Be Used With Act Flywheel (not Included).
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Inside Diameter:
- 0.79
- 18.9
- Sealed: Yes
- Outside Diameter:
- 1.26
- 32.0
- Bearing Type: Ball
- Product Weight (lbs.): 0.1
- Weight: 0.1
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- PB1010 is a high quality replacement bearing that is placed in the end of the crankshaft or in the center of the flywheel, depending on the vehicle. It is used to support the end of the transmission input shaft.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2009 - Honda Accord | V | 3471 | Manual | SOHC | 6 Cyl 3.5L | EX-L | - |
- ACT XACT Prolite Clutch Flywheel
- XACT Flywheel Prolite
- XACT Flywheel Prolite
- Product Attributes:
- Friction Surface Diameter:
- 215
- 8.5
- Engine Balance: Internal
- Grade Type: Performance
- Mounting Hardware Included: No
- Mounting Hole Quantity: 8
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- SFI Rating: 1.1
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Friction Surface Configuration: Raised
- Tooth Quantity: 119
- SFI: 1.1
- Replaceable Friction Surface: No
- Product Weight (lbs.):
- 7.8
- 8.5
- Weight: 7.8
- Friction Surface Diameter:
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 600125 is a Prolite flywheel, which is ACT's lighter flywheel offering with lowest inertia. Prolite flywheels are designed for best throttle response and acceleration. Prolite flywheels are preferred for road racing or rally racing, and have reduced drivability. Materials are properly distributed for maximum strength, good heat tolerance and rigidity. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2009 - Honda Civic | L | 1998 | K20Z3 | 4 Cyl 2.0L | Si | 122 |
- ACT XACT Streetlite Clutch Flywheel
- XACT Flywheel Streetlite
- XACT Flywheel Streetlite
- Product Attributes:
- Friction Surface Diameter:
- 215
- 8.5
- Engine Balance: Internal
- Grade Type: Performance
- Mounting Hardware Included: No
- Mounting Hole Quantity: 8
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- SFI Rating: 1.1
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Friction Surface Configuration: Raised
- Tooth Quantity: 119
- SFI: 1.1
- Replaceable Friction Surface: No
- Product Weight (lbs.): 11.4
- Weight: 11.4
- Friction Surface Diameter:
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 600295 is a Streetlite flywheel, which is considerably lighter than stock and is the most durable flywheel offering from ACT. Materials are properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity. ACT's Streetlite flywheels are preferred for street or drag racing. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2009 - Honda Civic | L | 1998 | K20Z3 | 4 Cyl 2.0L | Si | 122 |
- ACT Heavy Duty Performance Street Sprung Clutch Kit
- HD/Perf Street Sprung
- HD/Perf Street Sprung
- Product Attributes:
- Torque Capacity Over OE: 35%
- Torque Capacity (ft/lbs.): 255
- Grade Type: Performance
- Pilot Bearing Included: No
- Alignment Tool Included: Yes
- Disc Material: Organic
- Pilot Bushing Included: Yes
- Input Shaft Diameter: 1.03125
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Disc Type Sprung Solid: Sprung
- Flywheel Bolts Included: No
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Input Spline Quantity: 24
- Pressure Plate Bolts Included: No
- Grease Included: Yes
- Clutch Slave Cylinder Included: No
- Pressure Plate Type: Heavy Duty
- Release Bearing Included: Yes
- Clutch Master Cylinder Included: No
- Product Weight (lbs.):
- 11
- 11.0
- Clutch Disc Diameter:
- 214
- 8.4
- Flywheel Included: No
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- AR1-HDSS kit features ACT's most popular Heavy Duty pressure plate and most popular street disc. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Performance Street discs feature premium organic materials with high copper content for better heat transfer and steel-backed lining for greater burst strength and durability. These discs have reduced marcel for faster shift action to complement ACT pressure plates, with increased strength and reliability.
This Part Fits the Following OEM/Substitute Numbers:
08806, 762061, 8037-2100, DF538822, FX100 08037-HR00, SA002
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2009 - Honda Civic | L | 1998 | K20Z3 | 4 Cyl 2.0L | Si | 122 |
- ACT 4 Pad Sprung Race Clutch Disc
- 4 Pad Sprung Race Disc
- 4 Pad Sprung Race Disc
- Product Attributes:
- Splined Bore Diameter: 1.031
- Disc Type: Sprung
- Grade Type: Performance
- Disc Material: Ceramic
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Spline Quantity: 24
- Part Fitment Requirement: Must Be Used With Act Pressure Plate And Flywheel (not Included).
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Diameter:
- 240
- 9.4
- Friction Plate: No
- SFI: 1.1
- Product Weight (lbs.): 3.4
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 4240510-1 is a 4-pad spring-centered race disc made with high quality, ceramic friction materials. The engagement is harsher, but shifting is faster. The heavy duty torsional dampening springs are stronger, in most cases, than standard springs and are provided in the best sizes and spring rates to suit the application. The race disc features a heat-treated spring steel drive plate and is well-suited for the smaller disc sizes in smaller engines.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2009 - Honda Accord | V | 3471 | Manual | SOHC | 6 Cyl 3.5L | EX-L | - |
Showing 1 - 10 of 18 products
Loading...