Image
Product
Price
- For use with crimp type center hub assemblies.
- Monoloc Collar
- Monoloc Collar
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Product Weight (lbs.): 0.1
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 884006P is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications. Monoloc's hardened chrome-moly steel construction will provide years of service.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2013 - Subaru Impreza | H | 2458 | DOHC | United States | 4 Cyl 2.5L | WRX STI | - |
- XACT Flywheel Streetlite
- XACT Flywheel Streetlite
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Friction Surface Diameter:
- 240
- 9.4
- Tooth Quantity: 124
- SFI: 1.1
- Mounting Hole Quantity: 8
- Product Weight (lbs.): 15.5
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 600235 is a Streetlite flywheel, which is considerably lighter than stock and is the most durable flywheel offering from ACT. Materials are properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity. ACT's Streetlite flywheels are preferred for street or drag racing. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.
This Part Fits the Following OEM/Substitute Numbers:
2-721-ST, FF501A, FW-721-SF, SU30S
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Trans. Speed | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|---|
| 2013 - Subaru Impreza | H | 2458 | Manual | DOHC | 4 Cyl 2.5L | 6 | WRX STI Limited | Turbocharged | - |
- XACT Flywheel Prolite
- XACT Flywheel Prolite
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Friction Surface Diameter:
- 240
- 9.4
- Tooth Quantity: 124
- SFI: 1.1
- Mounting Hole Quantity: 8
- Product Weight (lbs.): 11.8
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 600240 is a Prolite flywheel, which is ACT's lighter flywheel offering with lowest inertia. Prolite flywheels are designed for best throttle response and acceleration. Prolite flywheels are preferred for road racing or rally racing, and have reduced drivability. Materials are properly distributed for maximum strength, good heat tolerance and rigidity. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.
This Part Fits the Following OEM/Substitute Numbers:
FW-721-AL, SU30A
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Trans. Speed | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|---|
| 2013 - Subaru Impreza | H | 2458 | Manual | DOHC | 4 Cyl 2.5L | 6 | WRX STI Limited | Turbocharged | - |
- XACT Flywheel Prolite
- XACT Flywheel Prolite
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Friction Surface Diameter:
- 11
- 280
- Tooth Quantity: 168
- SFI: 1.1
- Mounting Hole Quantity: 6
- Product Weight (lbs.): 14.6
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 600585 is a Prolite flywheel, which is ACT's lighter flywheel offering with lowest inertia. Prolite flywheels are designed for best throttle response and acceleration. Prolite flywheels are preferred for road racing or rally racing, and have reduced drivability. Materials are properly distributed for maximum strength, good heat tolerance and rigidity. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.
This Part Fits the Following OEM/Substitute Numbers:
2-LS1-STU, 460530, 700142, FW-LS1-SF, GF502A, SC75S
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine Designation | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|---|
| 2013 - Chevrolet Camaro | V | 6162 | Manual | OHV | LS3 | 8 Cyl 6.2L | SS | 376 |
- XACT Flywheel Streetlite
- XACT Flywheel Streetlite
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Friction Surface Diameter:
- 240
- 9.4
- Tooth Quantity: 114
- SFI: 1.1
- Mounting Hole Quantity: 7
- Product Weight (lbs.): 11.8
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 600550 is a Streetlite flywheel, which is considerably lighter than stock and is the most durable flywheel offering from ACT. Materials are properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity. ACT's Streetlite flywheels are preferred for street or drag racing. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.
This Part Fits the Following OEM/Substitute Numbers:
2-645-1STU, FW-110-SF, MF05A, SM10A
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2013 - Mitsubishi Lancer | L | 1998 | DOHC | 4 Cyl 2.0L | Evolution GSR | 122 |
- HD-M/Perf Street Sprung
- HD-M/Perf Street Sprung
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Torque Capacity Over OE: 45%
- Torque Capacity (ft/lbs.): 522
- Alignment Tool Included: Yes
- Disc Material: Organic
- Pilot Bushing Included: Yes
- Input Shaft Diameter: 1
- Part Fitment Requirement:
- Includes Act Monoloc.
- Includes Monoloc.
- Input Spline Quantity: 24
- Pressure Plate Type: Heavy Duty
- Release Bearing Included: Yes
- Product Weight (lbs.): 18.2
- Clutch Disc Diameter:
- 240
- 9.4
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- SB10-HDSS kit features ACT's most popular Heavy Duty pressure plate and most popular street disc. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Performance street discs are the most popular disc purchased. They feature premium organic materials with high copper content for better heat transfer and steel-backed lining for greater burst strength and durability. These discs feature a reduced marcel for faster shift action to complement ACT pressure plates. Quiet operation with increased strength and reliability. Monoloc is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications. Monoloc's hardened chrome-moly steel construction will provide years of service.
This Part Fits the Following OEM/Substitute Numbers:
15030-2100, 15803HD, 762651, DF012628, FX100 15017-HD00, SU302
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2013 - Subaru WRX STI | H | 2458 | DOHC | 4 Cyl 2.5L | Sport-tech | - |
- XT-M/Perf Street Sprung
- XT-M/Perf Street Sprung
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Torque Capacity Over OE: 68%
- Torque Capacity (ft/lbs.): 598
- Alignment Tool Included: Yes
- Disc Material: Organic
- Pilot Bushing Included: Yes
- Input Shaft Diameter: 1
- Part Fitment Requirement:
- Includes Act Monoloc.
- Includes Monoloc.
- Input Spline Quantity: 24
- Pressure Plate Type: Xtreme
- Release Bearing Included: Yes
- Product Weight (lbs.): 18.2
- Clutch Disc Diameter:
- 240
- 9.4
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- SB10-XTSS kit features an Xtreme pressure plate for the most demanding driver. ACT Xtreme pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Performance street discs are the most popular disc purchased. They feature premium organic materials with higher copper content for better heat transfer and steel-backed lining for greater burst strength and durability. These discs feature a reduced marcel for faster shift action to complement ACT pressure plates. Quiet operation with increased strength and reliability. Monoloc is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications. Monoloc's hardened chrome-moly steel construction will provide years of service.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2013 - Subaru WRX STI | H | 2458 | DOHC | 4 Cyl 2.5L | Base | - |
- 240mm upgrade. Must use ACT flywheel (included in kit).
- XT/Perf Street Sprung
- XT/Perf Street Sprung
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Torque Capacity Over OE: 65%
- Torque Capacity (ft/lbs.): 532
- Alignment Tool Included: Yes
- Disc Material: Organic
- Input Shaft Diameter: 1
- Part Fitment Requirement: Conversion Kit. Replaces Original 230mm Clutch. Must Use Act Flywheel (included In Kit). Subaru Has Incorporated 240mm Clutch Components Into Production During Mid-2018my Production Starting With Vin J806877. Act Clutch Kits And Flywheels Are Not Compatib
- Input Spline Quantity: 24
- Flywheel Type: Streetlite
- Pressure Plate Type: Xtreme
- Release Bearing Included: Yes
- Product Weight (lbs.): 28.6
- Clutch Disc Diameter:
- 240
- 9.4
- Flywheel Included: Yes
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- SB11-XTSS kit features an Xtreme pressure plate for the most demanding driver. ACT Xtreme pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Performance street discs are the most popular disc purchased. They feature premium organic materials with high copper content for better heat transfer and steel-backed lining for greater burst strength and durability. These discs have reduced marcel for faster shift action to complement ACT pressure plates. Quiet operation with increased strength and reliability.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine Designation | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2013 - Subaru WRX | H | 2458 | DOHC | EJ255 | 4 Cyl 2.5L | Limited | - |
- Includes ACT Prolite flywheel. Must use ACT flywheel (included in kit).
- HD/Perf Street Sprung
- HD/Perf Street Sprung
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Torque Capacity Over OE: 61%
- Torque Capacity (ft/lbs.): 270
- Alignment Tool Included: Yes
- Disc Material: Organic
- Input Shaft Diameter: 1
- Part Fitment Requirement:
- Conversion Kit. Includes Act Prolite Flywheel. Must Use Act Flywheel (included In Kit).
- Conversion Kit. Includes Act Prolite Flywheel. Must Use Act Flywheel (included In Kit). Flywheel Bolts Included (m10-1.0 X 25mm). Pressure Plate Bolts Included (m8-1.25 X 16mm).
- Input Spline Quantity: 24
- Flywheel Type: Prolite
- Pressure Plate Type: Heavy Duty
- Release Bearing Included: Yes
- Product Weight (lbs.): 24.9
- Clutch Disc Diameter:
- 224
- 8.8
- Flywheel Included: Yes
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- SB8-HDSS kit features ACT's most popular Heavy Duty pressure plate and most popular street disc. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Performance Street discs feature premium organic materials with high copper content for better heat transfer and steel-backed lining for greater burst strength and durability. These discs have reduced marcel for faster shift action to complement ACT pressure plates, with increased strength and reliability.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2013 - Subaru BRZ | H | 1998 | Manual | 4 Cyl 2.0L | Limited | 122 |
- HD/Race Sprung 6 Pad
- HD/Race Sprung 6 Pad
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Torque Capacity Over OE: 73%
- Torque Capacity (ft/lbs.): 640
- Alignment Tool Included: Yes
- Disc Material: Ceramic
- Input Shaft Diameter: 1
- Part Fitment Requirement:
- Must Be Used With The Act Flywheel (included In Kit). Gear Rattle Is Expected When Using The Act Single Mass Flywheel.
- Must Be Used With The Act Flywheel (included In Kit). Gear Rattle Is Expected When Using The Act Single Mass Flywheel. Pressure Plate Bolts Included (m8-1.25 X 20mm).
- Input Spline Quantity: 23
- Flywheel Type: Streetlite
- Pressure Plate Type: Heavy Duty
- Release Bearing Included: Yes
- Product Weight (lbs.): 30.1
- Clutch Disc Diameter:
- 240
- 9.4
- Flywheel Included: Yes
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- FF5-HDG6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad, spring-centered race disc features a spring-center to properly damp torsional vibrations and resist failure under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad, spring-centered race disc, engagement is harsher, but shifting is faster. The 6-pad, spring-centered disc is recommended for larger clutch sizes to absorb more heat.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2013 - Ford Focus | L | 1999 | Manual | DOHC | 4 Cyl 2.0L | ST | 122 |
Showing 1 - 10 of 58 products
Loading...