Image
Product
Price
- ACT Heavy Duty Race Sprung 6 Pad Clutch Kit
- HD/Race Sprung 6 Pad
- HD/Race Sprung 6 Pad
- Product Attributes:
- Torque Capacity Over OE: 109%
- Torque Capacity (ft/lbs.): 464
- Grade Type: Performance
- Alignment Tool Included: Yes
- Disc Material: Ceramic
- Input Shaft Diameter: 1.0325
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Disc Type Sprung Solid: Sprung
- Flywheel Bolts Included: Yes
- Part Fitment Requirement:
- Conversion Kit. Must Use Act Flywheel (included In Kit). Flywheel Bolts Included (m12-1.0 X 25mm). Pressure Plate Bolts Included (m8-1.25 X 16mm).
- Single Mass Conversion Kit. Must Use Act Flywheel (included In Kit).
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Input Spline Quantity: 24
- Pressure Plate Bolts Included: Yes
- Flywheel Type: Streetlite
- Grease Included: Yes
- Clutch Slave Cylinder Included: No
- Pressure Plate Type: Heavy Duty
- Release Bearing Included: Yes
- Clutch Master Cylinder Included: No
- Product Weight (lbs.): 33.7
- Clutch Disc Diameter:
- 240
- 9.4
- Flywheel Included: Yes
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- HC10-HDG6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad, spring-centered race disc features a spring-center to properly damp torsional vibrations and resist failure under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad, spring-centered race disc, engagement is harsher, but shifting is faster. The 6-pad, spring-centered disc is recommended for larger clutch sizes to absorb more heat.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2017 - Honda Civic | L | 1497 | Manual | DOHC | 4 Cyl 1.5L | Sport | - |
- ACT Heavy Duty Race Sprung 6 Pad Clutch Kit
- HD/Race Sprung 6 Pad
- HD/Race Sprung 6 Pad
- Product Attributes:
- Torque Capacity Over OE: 109%
- Torque Capacity (ft/lbs.): 464
- Grade Type: Performance
- Alignment Tool Included: Yes
- Disc Material: Ceramic
- Input Shaft Diameter: 1.0325
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Disc Type Sprung Solid: Sprung
- Flywheel Bolts Included: Yes
- Part Fitment Requirement: Conversion Kit. Must Use Act Flywheel (included In Kit). Flywheel Bolts Included (m12-1.0 X 25mm). Pressure Plate Bolts Included (m8-1.25 X 16mm).
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Input Spline Quantity: 24
- Pressure Plate Bolts Included: Yes
- Flywheel Type: Streetlite
- Grease Included: Yes
- Clutch Slave Cylinder Included: No
- Pressure Plate Type: Heavy Duty
- Release Bearing Included: Yes
- Clutch Master Cylinder Included: No
- Product Weight (lbs.): 33.7
- Clutch Disc Diameter:
- 240
- 9.4
- Flywheel Included: Yes
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- HC10-HDG6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad, spring-centered race disc features a spring-center to properly damp torsional vibrations and resist failure under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad, spring-centered race disc, engagement is harsher, but shifting is faster. The 6-pad, spring-centered disc is recommended for larger clutch sizes to absorb more heat.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2017 - Honda Civic | L | 1497 | DOHC | 4 Cyl 1.5L | Si | - |
- ACT Heavy Duty Performance Street Sprung Clutch Kit
- HD/Perf Street Sprung
- HD/Perf Street Sprung
- Product Attributes:
- Torque Capacity Over OE: 33%
- Torque Capacity (ft/lbs.): 412
- Grade Type: Performance
- Alignment Tool Included: Yes
- Disc Material: Organic
- Input Shaft Diameter: 1.0325
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Disc Type Sprung Solid: Sprung
- Flywheel Bolts Included: Yes
- Part Fitment Requirement: Must Use Act Flywheel (included In Kit). Flywheel Bolts Included (m12-1.0 X 25mm). Pressure Plate Bolts Included (m8-1.25 X 16mm).
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Input Spline Quantity: 24
- Pressure Plate Bolts Included: Yes
- Flywheel Type: Streetlite
- Grease Included: Yes
- Clutch Slave Cylinder Included: No
- Pressure Plate Type: Heavy Duty
- Release Bearing Included: Yes
- Clutch Master Cylinder Included: No
- Product Weight (lbs.): 31.2
- Clutch Disc Diameter:
- 240
- 9.4
- Flywheel Included: Yes
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- HC12-HDSS kit features ACT's most popular Heavy Duty pressure plate and most popular street disc. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Performance Street discs feature premium organic materials with high copper content for better heat transfer and steel-backed lining for greater burst strength and durability. These discs have reduced marcel for faster shift action to complement ACT pressure plates, with increased strength and reliability.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2017 - Honda Civic | L | 1996 | DOHC | 4 Cyl 2.0L | Type R | 122 |
- ACT Clutch Pilot Bearing
- Pilot Bearing
- Pilot Bearing
- Product Attributes:
- Grade Type: Regular
- Bearing Shape: Round
- Width:
- 0.276
- 7.00
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Part Fitment Requirement: Must Be Used With Act Flywheel (not Included).
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Inside Diameter:
- 0.79
- 18.9
- Sealed: Yes
- Outside Diameter:
- 1.26
- 32.0
- Bearing Type: Ball
- Product Weight (lbs.): 0.1
- Weight: 0.1
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- PB1010 is a high quality replacement bearing that is placed in the end of the crankshaft or in the center of the flywheel, depending on the vehicle. It is used to support the end of the transmission input shaft.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2017 - Honda Accord | V | 3471 | Manual | SOHC | 6 Cyl 3.5L | EX-L | - |
- ACT XACT Streetlite Clutch Flywheel
- XACT Flywheel Streetlite
- XACT Flywheel Streetlite
- Product Attributes:
- Friction Surface Diameter:
- 240
- 9.4
- Engine Balance: Internal
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Mounting Hole Quantity: 7
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- SFI Rating: 1.1
- Part Fitment Requirement: Must Be Used With Act Pressure Plate And Disc (not Included). Flywheel Bolts Included (m12-1.0 X 25mm).
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Friction Surface Configuration: Recessed
- Tooth Quantity: 139
- SFI: 1.1
- Replaceable Friction Surface: No
- Product Weight (lbs.): 15.2
- Weight: 15.2
- Friction Surface Diameter:
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 601200 is a Streetlite flywheel, which is considerably lighter than stock and is the most durable flywheel offering from ACT. Materials are properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity. ACT's Streetlite flywheels are preferred for street or drag racing. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2017 - Honda Civic | L | 1996 | DOHC | 4 Cyl 2.0L | Type R | 122 |
- ACT XACT Streetlite Clutch Flywheel
- XACT Flywheel Streetlite
- XACT Flywheel Streetlite
- Product Attributes:
- Friction Surface Diameter:
- 240
- 9.4
- Engine Balance: Internal
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Mounting Hole Quantity: 7
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- SFI Rating: 1.1
- Part Fitment Requirement:
- Must Be Used With Act Pressure Plate And Disc (not Included). Flywheel Bolts Included (m12-1.0 X 25mm).
- Must Be Used With Act Pressure Plate And Disc.
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Friction Surface Configuration: Recessed
- Tooth Quantity: 139
- SFI: 1.1
- Replaceable Friction Surface: No
- Product Weight (lbs.): 15.2
- Weight: 15.2
- Friction Surface Diameter:
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 601200 is a Streetlite flywheel, which is considerably lighter than stock and is the most durable flywheel offering from ACT. Materials are properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity. ACT's Streetlite flywheels are preferred for street or drag racing. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2017 - Honda Civic | L | 1996 | DOHC | 4 Cyl 2.0L | Type R | 122 |
- ACT Clutch Pilot Bearing
- Pilot Bearing
- Pilot Bearing
- Product Attributes:
- Grade Type: Regular
- Bearing Shape: Round
- Width:
- 0.276
- 7.00
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Part Fitment Requirement:
- Must Be Used With Act Flywheel (not Included).
- Must Be Used With Act Flywheel.
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Inside Diameter:
- 0.79
- 18.9
- Sealed: Yes
- Outside Diameter:
- 1.26
- 32.0
- Bearing Type: Ball
- Product Weight (lbs.): 0.1
- Weight: 0.1
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- PB1010 is a high quality replacement bearing that is placed in the end of the crankshaft or in the center of the flywheel, depending on the vehicle. It is used to support the end of the transmission input shaft.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2017 - Honda Civic | L | 1996 | DOHC | 4 Cyl 2.0L | Type R | 122 |
- ACT Heavy Duty Performance Street Sprung Clutch Kit
- HD/Perf Street Sprung
- HD/Perf Street Sprung
- Product Attributes:
- Torque Capacity Over OE: 33%
- Torque Capacity (ft/lbs.): 412
- Grade Type: Performance
- Alignment Tool Included: Yes
- Disc Material: Organic
- Input Shaft Diameter: 1.0325
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Disc Type Sprung Solid: Sprung
- Flywheel Bolts Included: Yes
- Part Fitment Requirement:
- Must Use Act Flywheel (included In Kit).
- Must Use Act Flywheel (included In Kit). Flywheel Bolts Included (m12-1.0 X 25mm). Pressure Plate Bolts Included (m8-1.25 X 16mm).
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Input Spline Quantity: 24
- Pressure Plate Bolts Included: Yes
- Flywheel Type: Streetlite
- Grease Included: Yes
- Clutch Slave Cylinder Included: No
- Pressure Plate Type: Heavy Duty
- Release Bearing Included: Yes
- Clutch Master Cylinder Included: No
- Product Weight (lbs.): 31.2
- Clutch Disc Diameter:
- 240
- 9.4
- Flywheel Included: Yes
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- HC12-HDSS kit features ACT's most popular Heavy Duty pressure plate and most popular street disc. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Performance Street discs feature premium organic materials with high copper content for better heat transfer and steel-backed lining for greater burst strength and durability. These discs have reduced marcel for faster shift action to complement ACT pressure plates, with increased strength and reliability.
This Part Fits the Following OEM/Substitute Numbers:
08800B, 762031, 8026-2100, CFT900800, FX100 08913-HR00, SA262
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2017 - Honda Civic | L | 1996 | DOHC | 4 Cyl 2.0L | Type R | 122 |
- ACT Heavy Duty Performance Street Sprung Clutch Kit
- HD/Perf Street Sprung
- HD/Perf Street Sprung
- Product Attributes:
- Torque Capacity Over OE: 63%
- Torque Capacity (ft/lbs.): 363
- Grade Type: Performance
- Alignment Tool Included: Yes
- Disc Material: Organic
- Input Shaft Diameter: 1.0325
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Disc Type Sprung Solid: Sprung
- Flywheel Bolts Included: Yes
- Part Fitment Requirement:
- Conversion Kit. Must Use Act Flywheel (included In Kit). Flywheel Bolts Included (m12-1.0 X 25mm). Pressure Plate Bolts Included (m8-1.25 X 16mm).
- Single Mass Conversion Kit. Must Use Act Flywheel (included In Kit).
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Input Spline Quantity: 24
- Pressure Plate Bolts Included: Yes
- Flywheel Type: Streetlite
- Grease Included: Yes
- Clutch Slave Cylinder Included: No
- Pressure Plate Type: Heavy Duty
- Release Bearing Included: Yes
- Clutch Master Cylinder Included: No
- Product Weight (lbs.): 33.1
- Clutch Disc Diameter:
- 240
- 9.4
- Flywheel Included: Yes
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- HC10-HDSS kit features ACT's most popular Heavy Duty pressure plate and most popular street disc. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Performance Street discs feature premium organic materials with high copper content for better heat transfer and steel-backed lining for greater burst strength and durability. These discs have reduced marcel for faster shift action to complement ACT pressure plates, with increased strength and reliability.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2017 - Honda Civic | L | 1497 | Manual | DOHC | 4 Cyl 1.5L | Sport | - |
- ACT Heavy Duty Performance Street Sprung Clutch Kit
- HD/Perf Street Sprung
- HD/Perf Street Sprung
- Product Attributes:
- Torque Capacity Over OE: 63%
- Torque Capacity (ft/lbs.): 363
- Grade Type: Performance
- Alignment Tool Included: Yes
- Disc Material: Organic
- Input Shaft Diameter: 1.0325
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Disc Type Sprung Solid: Sprung
- Flywheel Bolts Included: Yes
- Part Fitment Requirement: Conversion Kit. Must Use Act Flywheel (included In Kit). Flywheel Bolts Included (m12-1.0 X 25mm). Pressure Plate Bolts Included (m8-1.25 X 16mm).
- Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Input Spline Quantity: 24
- Pressure Plate Bolts Included: Yes
- Flywheel Type: Streetlite
- Grease Included: Yes
- Clutch Slave Cylinder Included: No
- Pressure Plate Type: Heavy Duty
- Release Bearing Included: Yes
- Clutch Master Cylinder Included: No
- Product Weight (lbs.): 33.1
- Clutch Disc Diameter:
- 240
- 9.4
- Flywheel Included: Yes
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- HC10-HDSS kit features ACT's most popular Heavy Duty pressure plate and most popular street disc. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Performance Street discs feature premium organic materials with high copper content for better heat transfer and steel-backed lining for greater burst strength and durability. These discs have reduced marcel for faster shift action to complement ACT pressure plates, with increased strength and reliability.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2017 - Honda Civic | L | 1497 | Manual | DOHC | 4 Cyl 1.5L | Sport | - |
Showing 1 - 10 of 19 products
Loading...