Image
Product
Price
- 1900 - 2100 RPM Stall; Requires 10.75 in. Bolt Circle/Dual Pattern Flexplate Req. 10.75 in. Bolt Circle Or Dual Pattern Flexplate
- Tork Master 2000 Torque Converter; 1900 - 2100 RPM Stall; Requires 10.75 in. Bolt Circle/Dual Pattern Flexplate;
- Tork Master 2000 Torque Converter
- Product Attributes:
- Trans Year:
- 1965
- 1966
- 1967
- 1968
- 1969
- 1970
- 1971
- 1972
- 1973
- 1974
- 1975
- 1976
- 1977
- 1978
- 1979
- 1980
- 1981
- 1982
- 1983
- 1984
- 1985
- 1986
- 1987
- 1988
- 1989
- 1990
- 1991
- Automotive Item Grade: High Performance
- WARNING CA Proposition 65: No
- Bolt Circle Diameter: 10.750 In.
- Flexplate Change Needed: Yes
- Stall Speed (RPM): 1900-2100
- Furnace-Brazed: Yes
- Trans Model:
- Gm- Th350 (auto) 3 Speed
- Gm- Th375 (auto) 3 Speed
- Gm- Th375b (auto) 3 Speed
- Gm- Th400 (auto) 3 Speed
- Gm- Th425 (auto) 3 Speed
- Trans Year:
-
Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
- Washer Between Turbine and Cover
- This Tork Master 2000 fits 1965-91 GM TH400, 425, 375 and 1968-81 GM TH350, 375B (not 350C.) Dont let the exceptional value fool you into thinking Tork Master Converters are not packed with lots of quality features which make them the best value-priced street performance converters money can buy. These converters perform best when paired with stock to modified engines up to 350hp/350 ft lbs. of torque, and lighter weight applications, like street rods. The Tork Master will provide noticeably quicker launches and harder acceleration while maintaining normal daily driving qualities. Upgrades like a new precision alloy steel pump drive tube, needle thrust bearing when factory equipped, new thrust washer between turbine and cover when required, and pressure tested and fully balanced by expertly trained technicians. Notes: Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. Notes: Not recommended for big block, supercharged, plate-type nitrous oxide or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product. Has 10.75-inch bolt circle
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Transmission Manuf. Code | CID |
|---|---|---|---|---|---|
| 1970 - Buick Estate Wagon | V | - | 8 Cyl 5.7L | THM375/M39 | 350 |
- Deep; Includes Drain Plug/Mounting Hardware; Adds An Additional 2 qts.
- Transmission Oil Pan; Deep; Includes Drain Plug/Mounting Hardware; Adds An Additional 2 qts.;
- Transmission Oil Pan
- Product Attributes:
- Instructions Included: Yes
- California Proposition 65 Chemical Name 1: Chromium (hexavalent Compounds)
- Mounting Hardware Included: Yes
- Package Contents: Transmission Pan, Pan Gasket, Drain Plug With Seal, Filter Extension, O-rings, Filter Extension Screws, Nuts, Bolts, Washers And Instructions
- WARNING CA Proposition 65: No
- Style: Deep
- Filter Extension Included: Yes
- Drain Plug Kit: Yes
- Additional Fluid Capacity: 2 Qt.
- Temperature Sensor Bung: Yes
- Drain Plug Included: Yes
- Trans Model: Gm- Th400 (auto) 3 Speed
-
Features:
- Additional Oil Capacity
- More Cooling Ability
- No Dipstick Modification
- Some Include Fluid Pickup Extension
- Built-In Drain Plugs
- Cast Aluminum
- Our Hi-Tek deep transmission pans are constructed from A356-T6 aluminum and are cast with thick internal and external fins, adding additional strength and increased cooling properties. The deep pan design increases fluid capacity by 2-quarts over the stock O.E. steel pan. All these features combined help dissipate heat quicker netting lower transmission and fluid temperatures prolonging the life of your transmission, transmission fluid and corresponding components. Other features for this popular pan include a filter extension, pan gasket and drain port with magnetic drain plug for clean and easy servicing. Also includes a 1/8 inch NPT temperature sensor port for easily adding a temp gauge for monitoring transmission temperatures while daily driving, towing or racing. Includes detailed instructions with all necessary hardware for an easy at home installation.
Additional Fitment Information:
| Vehicle | Transmission Manuf. Code |
|---|---|
| 1970 - Buick LeSabre | THM400 |
- Deep; Includes Drain Plug/Mounting Hardware; Adds Additional 4 qts.; Repl. Filter PN[10288]
- Transmission Oil Pan; Deep; Includes Drain Plug/Mounting Hardware; Adds Additional 4 qts.; Repl. Filter PN[10288];
- Transmission Oil Pan
- Product Attributes:
- Instructions Included: Yes
- Bolt Quantity: 14
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- California Proposition 65 Chemical Name 1: Lead
- Mounting Hardware Included: Yes
- Package Contents: Transmission Pan, Gasket, Filter, Filter Extension, Magnetic Drain Plug, 1/8 Brass Npt Fitting And Installation Hardware
- WARNING CA Proposition 65: No
- Style: Deep
- Filter Included: Yes
- Pan Hang Over Stock: 3-3/8 In
- Filter Extension Included: Yes
- Drain Plug Kit: Yes
- Gasket Material: Cork
- Additional Fluid Capacity: 4 Qt. To All Trans Except 48re
- Drain Plug Type: Magnetic
- Temperature Sensor Bung: Yes
- Drain Plug Included: Yes
- Trans Model: Chrysler- Torqueflite A727 (auto) 3 Speed
-
Features:
- Additional Oil Capacity
- More Cooling Ability
- No Dipstick Modification
- Some Include Fluid Pickup Extension
- Built-In Drain Plugs
- Cast Aluminum
- Our Hi-Tek deep transmission pans are constructed from A356-T6 aluminum and are cast with thick internal and external fins, adding additional strength and increased cooling properties. The deep pan design increases fluid capacity by 4-quarts over the stock O.E. steel pan. All these features combined help dissipate heat quicker netting lower transmission and fluid temperatures prolonging the life of your transmission, transmission fluid and corresponding components. Other features for this popular pan include a filter, filter extension, gasket and drain port with magnetic drain plug for clean and easy servicing. Also includes a 1/8-inch NPT temperature sensor port for easily adding a temp gauge for monitoring transmission temperatures while daily driving, towing or racing. Includes detailed instructions with all necessary hardware for an easy at home installation. Fits all Chrysler, Dodge, Plymouth A727 (RH36, RH37) A518 (46RH, 46RE) A618 (47RH, 47RE, 48RE) automatic transmissions.
Additional Fitment Information:
| Vehicle | Transmission Manuf. Code |
|---|---|
| 1970 - Plymouth Barracuda | A727 (36RH) |
- 2300 - 2500 RPM Stall; 10 in. Bolt Circle
- Holeshot 2400 Torque Converter; 2300 - 2500 RPM Stall; 10 in. Bolt Circle;
- Holeshot 2400 Torque Converter
- Product Attributes:
- Lock Up Type: No
- Trans Year:
- 1967
- 1968
- 1969
- 1970
- 1971
- 1972
- 1973
- 1974
- 1975
- 1976
- 1977
- 1978
- 1979
- 1980
- 1981
- Automotive Item Grade: High Performance
- California Proposition 65 Chemical Name 1: Chromium (hexavalent Compounds)
- WARNING CA Proposition 65: No
- Flexplate Change Needed: Yes
- Stall Speed (RPM): 2300-2500
- Furnace-Brazed: Yes
- Trans Model: Chrysler- Torqueflite A727 (auto) 3 Speed
-
Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
- New Turbine Hub
- New Springs/Rollers In Stator
- B&M Holeshot 2400 for 1967-81 Chrysler, Dodge, Plymouth Torqueflite A727 automatic transmissions (Non-lock-up) with 24 spline input and a 10-inch bolt circle. The Holeshot 2400 converter is good for vehicles with some performance engine modifications, particularly big cams that tend to reduce low-end power and torque. The higher stall speed of this converter will launch the car in a higher rpm range where more torque is readily available, resulting in quicker acceleration. Holeshot converters feature furnace brazed impeller fins and turbine, new precision alloy impeller hub and new heavy duty needle bearings. Other features include fully balanced and pressure tested by expert technicians. If your vehicle is equipped with a plate type nitrous system or supercharger, please refer to the Nitrous Holeshot line of converters. Notes: Stall speed listings are based on engines producing 230lb ft of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. This converter is Not recommended for supercharged, plate-type nitrous oxide or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Transmission Manuf. Code | CID |
|---|---|---|---|---|---|
| 1970 - Chrysler Town & Country | V | 7211 | 8 Cyl 7.2L | A727 (36RH) | 440 |
- 2300 - 2500 RPM Stall; Requires 10.75 in. Bolt Circle/Dual Pattern Flexplate Req. 10.75 in. Bolt Circle Or Dual Pattern Flexplate
- Holeshot 2400 Torque Converter; 2300 - 2500 RPM Stall; Requires 10.75 in. Bolt Circle/Dual Pattern Flexplate;
- Holeshot 2400 Torque Converter
- Product Attributes:
- Trans Year:
- 1965
- 1966
- 1967
- 1968
- 1969
- 1970
- 1971
- 1972
- 1973
- 1974
- 1975
- 1976
- 1977
- 1978
- 1979
- 1980
- 1981
- 1982
- 1983
- 1984
- 1985
- 1986
- 1987
- 1988
- 1989
- 1990
- 1991
- Automotive Item Grade: High Performance
- WARNING CA Proposition 65: No
- Bolt Circle Diameter: 10.750 In.
- Flexplate Change Needed: Yes
- Stall Speed (RPM): 2300-2500
- Furnace-Brazed: Yes
- Trans Model:
- Gm- Th350 (auto) 3 Speed
- Gm- Th375 (auto) 3 Speed
- Gm- Th375b (auto) 3 Speed
- Gm- Th400 (auto) 3 Speed
- Gm- Th425 (auto) 3 Speed
- Trans Year:
-
Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
- New Turbine Hub
- New Springs/Rollers In Stator
- HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) are for serious-minded performance enthusiasts and offer additional strength and durability features not found in our Tork Master or Traveler series of converters. The Holeshot converter is an excellent choice for vehicles with some performance engine modifications, particularly big cams that tend to reduce low-end power and torque. The higher stall speed of this converter will launch the car in a higher rpm range where more torque is readily available, resulting in quicker acceleration. Holeshot converters feature furnace brazed impeller fins and turbine, new precision alloy impeller hub and new heavy duty needle bearings. Other features include fully balanced and pressure tested by expert technicians. If your vehicle is equipped with a plate type nitrous system or supercharger, please refer to the Nitrous Holeshot line of converters. Notes: Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. This converter is Not recommended for supercharged, plate-type nitrous oxide or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product. 10.75-inch bolt circle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Transmission Manuf. Code | CID |
|---|---|---|---|---|---|
| 1970 - Chevrolet C20 Pickup | V | - | 8 Cyl 5.7L | THM375/M39 | 350 |
- 2800 - 3200 RPM Stall
- Tork Master 3000 Torque Converter; 2800 - 3200 RPM Stall;
- Tork Master 3000 Torque Converter
- Product Attributes:
- Trans Year:
- 1965
- 1966
- 1967
- 1968
- 1969
- 1970
- 1971
- 1972
- 1973
- 1974
- 1975
- 1976
- 1977
- 1978
- 1979
- 1980
- 1981
- 1982
- 1983
- 1984
- 1985
- 1986
- 1987
- 1988
- 1989
- 1990
- 1991
- Automotive Item Grade: High Performance
- WARNING CA Proposition 65: No
- Bolt Circle Diameter: 10.750 In.
- Flexplate Change Needed: Yes
- Stall Speed (RPM): 2800-3200
- Furnace-Brazed: Yes
- Trans Model:
- Gm- Th350 (auto) 3 Speed
- Gm- Th375 (auto) 3 Speed
- Gm- Th375b (auto) 3 Speed
- Gm- Th400 (auto) 3 Speed
- Gm- Th425 (auto) 3 Speed
- Trans Year:
-
Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
- Washer Between Turbine and Cover
- The Tork Master 3000 fits 1965-91 GM TH400, 425, 375 and 1968-81 GM TH350, 375B (not 350C) transmissions. Dont let the exceptional value fool you into thinking Tork Master Converters are not packed with lots of quality features, making them the best value-priced street performance converters money can buy. These converters perform best when paired with stock to modified engines up to 350hp/350 ft lbs. of torque, and lighter weight applications, like street rods. The Tork Master will provide noticeably quicker launches and harder acceleration while maintaining normal daily driving qualities. Upgrades like a new precision alloy steel pump drive tube, needle thrust bearing when factory equipped, new thrust washer between turbine and cover when required, and pressure tested and fully balanced by expertly trained technicians. Notes: Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. Not recommended for big block, supercharged, plate-type nitrous oxide or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product. 10.75-inch bolt circle
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Transmission Manuf. Code | CID |
|---|---|---|---|---|---|
| 1970 - Buick Electra | V | - | 8 Cyl 7.5L | THM375/M39 | 455 |
- 2300 - 2500 RPM Stall
- Tork Master 2400 Torque Converter; 2300 - 2500 RPM Stall;
- Tork Master 2400 Torque Converter
- Product Attributes:
- Trans Year:
- 1965
- 1966
- 1967
- 1968
- 1969
- 1970
- 1971
- 1972
- 1973
- 1974
- 1975
- 1976
- 1977
- 1978
- 1979
- 1980
- 1981
- 1982
- 1983
- 1984
- 1985
- 1986
- 1987
- 1988
- 1989
- 1990
- 1991
- Automotive Item Grade: High Performance
- WARNING CA Proposition 65: No
- Bolt Circle Diameter: 10.750 In.
- Flexplate Change Needed: Yes
- Stall Speed (RPM): 2300-2500
- Furnace-Brazed: Yes
- Trans Model:
- Gm- Th350 (auto) 3 Speed
- Gm- Th375 (auto) 3 Speed
- Gm- Th375b (auto) 3 Speed
- Gm- Th400 (auto) 3 Speed
- Gm- Th425 (auto) 3 Speed
- Trans Year:
-
Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
- Washer Between Turbine and Cover
- The Tork Master 2400 fits 1965-91 GM TH400, 425, 375 and 1968-81 GM TH350, 375B (not 350C.) Dont let the exceptional value fool you into thinking Tork Master Converters are not packed with lots of quality features, making them the best value-priced street performance converters money can buy. These converters perform best when paired with stock to modified engines up to 350hp/350 ft lbs. of torque, and lighter weight applications, like street rods. The Tork Master will provide noticeably quicker launches and harder acceleration while maintaining normal daily driving qualities. Upgrades like a new precision alloy steel pump drive tube, needle thrust bearing when factory equipped, new thrust washer between turbine and cover when required, and pressure tested and fully balanced by expertly trained technicians. Notes: Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. Not recommended for big block, supercharged, plate-type nitrous oxide or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product. 10.75-inch bolt circle
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Transmission Manuf. Code | CID |
|---|---|---|---|---|---|
| 1970 - Buick Estate Wagon | V | - | 8 Cyl 7.5L | THM375/M39 | 455 |
- 1900 - 2100 RPM Stall; Requires 10.75 in. Bolt Circle/Dual Pattern Flexplate
- Tork Master 2000 Torque Converter; 1900 - 2100 RPM Stall; Requires 10.75 in. Bolt Circle/Dual Pattern Flexplate;
- Tork Master 2000 Torque Converter
- Product Attributes:
- Trans Year:
- 1965
- 1966
- 1967
- 1968
- 1969
- 1970
- 1971
- 1972
- 1973
- 1974
- 1975
- 1976
- 1977
- 1978
- 1979
- 1980
- 1981
- 1982
- 1983
- 1984
- 1985
- 1986
- 1987
- 1988
- 1989
- 1990
- 1991
- Automotive Item Grade: High Performance
- WARNING CA Proposition 65: No
- Bolt Circle Diameter: 10.750 In.
- Flexplate Change Needed: Yes
- Stall Speed (RPM): 1900-2100
- Furnace-Brazed: Yes
- Trans Model:
- Gm- Th350 (auto) 3 Speed
- Gm- Th375 (auto) 3 Speed
- Gm- Th375b (auto) 3 Speed
- Gm- Th400 (auto) 3 Speed
- Gm- Th425 (auto) 3 Speed
- Trans Year:
-
Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
- Washer Between Turbine and Cover
- This Tork Master 2000 fits 1965-91 GM TH400, 425, 375 and 1968-81 GM TH350, 375B (not 350C.) Dont let the exceptional value fool you into thinking Tork Master Converters are not packed with lots of quality features which make them the best value-priced street performance converters money can buy. These converters perform best when paired with stock to modified engines up to 350hp/350 ft lbs. of torque, and lighter weight applications, like street rods. The Tork Master will provide noticeably quicker launches and harder acceleration while maintaining normal daily driving qualities. Upgrades like a new precision alloy steel pump drive tube, needle thrust bearing when factory equipped, new thrust washer between turbine and cover when required, and pressure tested and fully balanced by expertly trained technicians. Notes: Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. Notes: Not recommended for big block, supercharged, plate-type nitrous oxide or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product. Has 10.75-inch bolt circle
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Transmission Manuf. Code | CID |
|---|---|---|---|---|---|
| 1970 - Chevrolet Bel Air | V | 7441 | 8 Cyl 7.4L | THM350 | 454 |
- 2300 - 2500 RPM Stall; Requires 10.75 in. Bolt Circle/Dual Pattern Flexplate
- Holeshot 2400 Torque Converter; 2300 - 2500 RPM Stall; Requires 10.75 in. Bolt Circle/Dual Pattern Flexplate;
- Holeshot 2400 Torque Converter
- Product Attributes:
- Trans Year:
- 1965
- 1966
- 1967
- 1968
- 1969
- 1970
- 1971
- 1972
- 1973
- 1974
- 1975
- 1976
- 1977
- 1978
- 1979
- 1980
- 1981
- 1982
- 1983
- 1984
- 1985
- 1986
- 1987
- 1988
- 1989
- 1990
- 1991
- Automotive Item Grade: High Performance
- WARNING CA Proposition 65: No
- Bolt Circle Diameter: 10.750 In.
- Flexplate Change Needed: Yes
- Stall Speed (RPM): 2300-2500
- Furnace-Brazed: Yes
- Trans Model:
- Gm- Th350 (auto) 3 Speed
- Gm- Th375 (auto) 3 Speed
- Gm- Th375b (auto) 3 Speed
- Gm- Th400 (auto) 3 Speed
- Gm- Th425 (auto) 3 Speed
- Trans Year:
-
Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
- New Turbine Hub
- New Springs/Rollers In Stator
- HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) are for serious-minded performance enthusiasts and offer additional strength and durability features not found in our Tork Master or Traveler series of converters. The Holeshot converter is an excellent choice for vehicles with some performance engine modifications, particularly big cams that tend to reduce low-end power and torque. The higher stall speed of this converter will launch the car in a higher rpm range where more torque is readily available, resulting in quicker acceleration. Holeshot converters feature furnace brazed impeller fins and turbine, new precision alloy impeller hub and new heavy duty needle bearings. Other features include fully balanced and pressure tested by expert technicians. If your vehicle is equipped with a plate type nitrous system or supercharger, please refer to the Nitrous Holeshot line of converters. Notes: Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. This converter is Not recommended for supercharged, plate-type nitrous oxide or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product. 10.75-inch bolt circle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Transmission Manuf. Code | CID |
|---|---|---|---|---|---|
| 1970 - Chevrolet Bel Air | L | 4098 | 6 Cyl 4.1L | THM400 | 250 |
- Standard SFI; Internal Balance; 168 Tooth; 10.75 in. and 11.5 in. Bolt Circle
- Automatic Transmission Flexplate; Standard SFI; Internal Balance; 168 Tooth; 10.75 in. and 11.5 in. Bolt Circle;
- Automatic Transmission Flexplate
- Product Attributes:
- California Proposition 65 Chemical Name 1: Cadmium And Cadmium Compounds
- WARNING CA Proposition 65: No
- SFI Certification Sticker: Included
- SFI Approved: Yes
- Crankshaft Bolt Hole Quantity: 6
- Dual Pattern: No
- Item Weight: 7.000 Lbs.
- Balance: Internal
- NHRA Accepted: Yes
- Outside Diameter: 14.100 In.
- IHRA Legal: Yes
- Timing Marks: 168
-
Features:
- NHRA/IHRA Legal For All Classes
- Includes SFI Certification Sticker
- Ideal For Street Applications
- To Extreme Duty Racing
- To High RPM Use
- As performance levels increase, an O.E. style flexplate just wont cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance SFI approved flexplate designed for 1955-1985 GM small block (internally balanced) V8 engines along with 4.3L V6 engines. Also fits 1965-up GM big block (internally balanced) V8 engines with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Transmission Manuf. Code | CID |
|---|---|---|---|---|---|
| 1970 - Buick Estate Wagon | V | - | 8 Cyl 7.5L | THM400 | 455 |
Showing 1 - 10 of 31 products
Loading...