Image
Product
Price
- Blue Anodized CNC Machined Billet 6061 T-6 Hardened Aluminum
- Precision Sport Manual Transmission Shifter; Blue Anodized CNC Machined Billet 6061 T-6 Hardened Aluminum;
- Precision Sport Manual Transmission Shifter
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Trans Model: Dodge- G56 (man) 6 Speed
-
Features:
- Reduces Shift Throw By 26 Percent
- Retains Factory Isolated Stick For a Simple Installation
- Engineered To Provide Precision Shifts For The G56 Transmissions
- B&M Performance and Off-Road are proud to introduce our new Precision SportShifter for 2006 to 2018 Dodge Ram 2500 and 3500 models equipped with the G56 6-speed manual transmission. The unit features a CNC billet aluminum case with an electric blue anodized finish. The housing contains internal components made from super tough 4140 Chromoly and reduces the shift-throw by almost 30% compared to the factory shifter. We also significantly increased the detent pressure to create a noticeably stiffer shift feel and prevent the transmission from popping out of gear. The shifter retains the factory shift stick and knob, and is covered by our Lifetime Limited Warranty.
Additional Fitment Information:
| Vehicle | Transmission Manuf. Code | Sub Model |
|---|---|---|
| 2016 - Ram 2500 | G56 | ST |
- Short Throw
- Precision Sport Manual Transmission Shifter; Short Throw;
- Precision Sport Manual Transmission Shifter
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Shift Throw Reduced By 35 Percent
- CNC Machined Blue Anodized T6061 Aluminum
- Billet 303 Stainless Steel Lower Stick
- Fully Isolated Upper Stick To Reduce Vibration
- Includes a Black 5-Speed Shift Knob
- Engineered Specifically To Provide Precision Shifts
- Relatively Easy Installation
- This B&M Precision SportShifter is engineered for 2016-2022 Toyota Tacoma 4WD with 3.5L engine and 6-speed transmission. The shifter uses the finest materials available resulting in short positive shifts that you can depend on while either off-roading or driving through city streets. This stylized precision shifter reduces shift throw by 35% over the factory shifter and includes many of the key features found in our race-proven shifters including a 303 stainless steel stick assembly, a CNC machined T6061 aluminum base, glass filled nylon pivot ball and a black B&M logo shift knob for a firm, yet positive shift action. Combine all these features with a relatively quick and easy installation, and you get a professional level shifter that will give you years of dependable worry-free service.
Additional Fitment Information:
| Vehicle | Transmission Manuf. Code | Sub Model | Drive Type |
|---|---|---|---|
| 2016 - Toyota Tacoma | RC62F | TRD Off-Road | 4WD |
- Dipstick Length 40.63 in.; Includes Dip Stick Assembly/B&M(R) Logo Engraved Cap/O-Ring; Black
- Automatic Transmission Locking Dip Stick; Dipstick Length 40.63 in.; Includes Dip Stick Assembly/B&M® Logo Engraved Cap/O-Ring; Black;
- Automatic Transmission Locking Dip Stick
- Product Attributes:
- Tube Material: Braided Stainless Steel
- California Proposition 65 Chemical Name 1: Chromium (hexavalent Compounds)
- Package Contents: Dipstick, Tube And Hardware
- WARNING CA Proposition 65: No
- Dipstick/Filler Tube O-Rings Included: Yes
- Tube Length: 40.630 In.
- Trans Model: Aodew/4r75e/4r75e/aodew/4r70e/6r80/10r80
- Dipstick Material: Stainless Steel
-
Features:
- Ideal for Dragster Applications
- Precision Machined Billet Aluminum
- Cap Features Knurled Finish/O-Ring Seal
- Prevents Leaks
- Transmission Seal also included
- The B&M Locking Transmission Dipstick was designed to allow for a quick and easy check of the automatic transmission fluid level and fluid quality by the vehicle owner/operator without having to go to the dealership. Fits 2010-2022 Ford F-150 trucks with the 6R80, 10R80, 4R70E and 4R75E transmissions. Constructed of billet stainless steel fittings, steel braided hose, and black mil-spec anodized aluminum 6061-T6 cap and bracket, this rugged unit allows for both cold and warm fluid level checks and is meant to be installed in the vehicle and locked into place. Additional features include a billet locking cap with a sure-grip knurled finish for easy handling and features the B&M logo milled in the top of the cap, showing everyone you added a quality product and that you take care of youre vehicle. Notes: Fits 2011-2014 Raptor and 2017-2022 Raptor trucks.
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Ford F-150 |
- 3/8 in. 16 Thread; Nickel Chromoly Steel; 11 in. Black Finished Handle; Round Black Shift Knob w/B&M Logo
- Shifter Stick; 3/8 in. 16 Thread; Nickel Chromoly Steel; 11 in. Black Finished Handle; Round Black Shift Knob w/B&M Logo;
- Shifter Stick
- Product Attributes:
- California Proposition 65 Chemical Name 5: Lead Oxide
- Thread Size: 0.375 In. - 16
- Automotive Item Grade: High Performance
- California Proposition 65 Chemical Name 4: Ethyl Acrylate
- California Proposition 65 Chemical Name 3: Arsenic Trioxide
- California Proposition 65 Chemical Name 2: Antimony Trioxide
- Rod Length: 11.125 In.
- Shift Lever Length: 11.500 In.
- California Proposition 65 Chemical Name 1: Chromium (hexavalent Compounds)
- Package Contents: Shift Stick Assembly And Knob
- WARNING CA Proposition 65: No
- Shifter Knob Color: Black
- Rod Diameter: 0.625 In.
- Shifter Knob Material: Phenolic
- With Overdrive Switch: No
- Safety Lock: No
- California Proposition 65 Chemical Name 6: Styrene
-
Features:
- Heavy Duty Nickel Chromoly Alloy Stick
- New Ergonomic Bends For Improved Shift Comfort
- This B&M shift stick assembly is designed specifically for all 2007-2018 Jeep Wrangler JK models with 6 speed manual transmissions and can be used as either a direct-replacement of the factory shift stick, or as the finishing touch when used with our JK Precision SportShifter part #45195. The stick is constructed from high strength 4340 nickel-chromoly steel and features improved bends that provide better shifting leverage and comfort than the factory stick. The stock Jeep shift handle has a thick and soft rubber isolator between the shifter and the stick that reduces transmission noise inside of the Jeep, but degrades over time and results in a very mushy feel. Our Precision stick features a billet aluminum block with four replaceable rubber o-rings that provide isolation from transmission gear noise and also result in shorter, noticeably firmer and more positive shifts. The shift handle is finished off with a durable black e-coat and topped with a black round B&M logo shift knob showing that you take off-road performance seriously. The stick features a 3/8 x 16 thread pattern so you can also customize the look of your shifter with other styles and colors of shift knobs. Note: Fits the stock shifter and B&M SportShifter #45195.
Additional Fitment Information:
| Vehicle | Transmission Manuf. Code |
|---|---|
| 2016 - Jeep Wrangler | NSG370 |
- Use Stock Stick/Knob; Includes Aluminum Housing/Heavy Duty Detent Springs; Billet Aluminum; Blue
- Precision Sport Manual Transmission Shifter Kit; Use Stock Stick/Knob; Includes Aluminum Housing/Heavy Duty Detent Springs; Billet Aluminum; Blue;
- Precision Sport Manual Transmission Shifter Kit
- Product Attributes:
- Thread Size: N/a
- Automotive Item Grade: High Performance
- California Proposition 65 Chemical Name 3: Benzene
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- Rod Length: N/a
- California Proposition 65 Chemical Name 1: Lead
- Package Contents: Shifter Assembly And Hardware
- WARNING CA Proposition 65: No
- Shifter Knob Included: No
- Rod Diameter: N/a
- With Overdrive Switch: No
- Safety Lock: No
- Shift Throw Reduction: 35%
- Housing Mount Hole Quantity: 4
-
Features:
- Reduces Shift Throw By 35 Percent
- CNC Machined
- Heavy Duty Detent Springs
- Limited Lifetime Warranty
- B&M Performance and Off-Road are proud to introduce our new Precision SportShifter for 2005-18 Jeep Wrangler TJ and JK models equipped with the NSG370 6-speed manual transmission. The unit features a CNC billet aluminum case with an electric blue anodized finish. The housing contains internal components made from super tough 4140 Chromoly and reduces the shift-throw by over 35% compared to the sloppy factory shifter. We also addressed the weak factory detent pressure and have significantly increased the detent pressure creating a noticeably stiffer shift feel and preventing the transmission from popping out of gear. The shifter can retain the factory shift stick and knob, but you'll want to check out our ergonomic B&M replacement shift handle for 2007-2018 JK models, part# 46200, which comes with a specially designed isolated assembly and includes a black B&M shift knob. The stick will also accept any 3/8-16 threaded shift knob if you prefer. B&M Racing is the first and only company to address the JKs need for an upgraded manual shifter option and we knocked this one out of the park! The SportShifter is covered by our Lifetime Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Transmission Manuf. Code | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Wrangler | V | 3604 | 6 Cyl 3.6L | NSG370 | 220 |
- A356-T6 Aluminum; Natural Finish; Includes Drain Plug/Mounting Hardware; Additional 4 qts.
- Heavy-Duty Transmission Pan; A356-T6 Aluminum; Natural Finish; Includes Drain Plug/Mounting Hardware; Additional 4 qts.;
- Heavy-Duty Transmission Pan
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Trans Model:
- 845re
- 850re
- 8hp70
-
Features:
- Additional 4-Quart Fluid Capacity
- Durable A356 Aluminum Construction
- Features A Temperature Sensor Port
- Drain Port With Magnetic Drain Plug For Easy Servicing
- Finned Design For Added Strength And Cooling
- Lifetime Limited Warranty
- Includes Hardware For Easy Installation
- Available In Natural Or Black Finishes
- B&M Hi-Tek deep transmission pans are constructed from A356-T6 aluminum and are cast with thick internal and external fins, adding additional strength and increased cooling properties. The deep pan design increases fluid capacity by 4 quarts over the stock O.E. steel pan. All these features combined help dissipate heat quicker netting lower transmission and fluid temperatures and prolonging the life of your transmission, transmission fluid, and corresponding components. Other features of this popular pan include a filter extension, pan gasket, and drain port with a magnetic drain plug for clean and easy servicing. Also includes a 1/8-inch NPT temperature sensor port for easily adding a temp gauge for monitoring transmission temperatures while daily driving, towing, or racing. Includes detailed instructions with all necessary hardware for an easy at-home installation.
Additional Fitment Information:
| Vehicle | Transmission Manuf. Code | Sub Model |
|---|---|---|
| 2016 - Ram 1500 | 845RE | SLT |
- Dash Mounted; Billet Aluminum; Black
- Automatic Transmission Shift Knob; Dash Mounted; Billet Aluminum; Black;
- Automatic Transmission Shift Knob
- Product Attributes:
- Automotive Item Grade: High Performance
- Shifter Knob Material: T-6061 Aluminum
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- California Proposition 65 Chemical Name 1: Chromium (hexavalent Compounds)
- With Overdrive Switch: No
- Package Contents: Knob, Trim Cap
- Shifter Handle Included: No
- WARNING CA Proposition 65: No
- Shifter Knob Included: Yes
- Safety Lock: No
- Shifter Knob Color: Black
-
Features:
- CNC Machined Billet Aluminum
- Rugged Industrial Look
- Easy Installation
- The B&M replacement shift knob fits all 2009-2022* (*Classic body) RAM 1500 trucks with a dash-mounted rotary dial gear selector and features a tough rugged industrial look thats well suited for the RAM styling. The shift knob is constructed of CNC machined T6061 aluminum, gets a tough black anodized finish for durability, and the B&M logo is laser etched on the face of the knob. Comes with all necessary hardware and easy to follow instructions for a quick and easy installation.
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Ram 1500 |
Showing 1 - 7 of 7 products
Loading...