Image
Product
Price
- BD 5.9L Cummins P7100 AFC Spring Kit Dodge 1994-1998 12-valve
- P7100 Fuel Pump;
- BD 5.9L Cummins P7100 AFC Spring Kit Dodge RAM 2500/3500 1994-1998 12-Valve Engine
- AFC Spring Kit
- Product Attributes:
- Category: Parts & Accessories
- Engine: 5.9l Cummins 94-98 12 Valve
- Suggested Product: 1040182
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Ensures that full AFC link travel occurs with a reasonable amount of boost and allows smoke control by adjusting the star wheel
- Spring tension is sufficient to allow smoke adjustment without reducing power at usually attained boost levels
- Spring is a bit longer to give a bit of "pre-load "without turning the star wheel so far that full link travel may be impeded
- AFC Spring Kit Includes:
- Medium tension AFC Spring
- Light tension AFC spring
- Short, medium, and long break-off screws, M6 x 1.0 thread
- Short, medium, and long button-head Allen screws
- M6 x 1.0 thread.3 & 4 mm Allen wrenches
- BD's High RPM Mechanical Governor & Delivery Valve Kits can give you the power and torque you've been looking for. The High RPM Mechanical Governor Kit increases the Cummins engine speed to 3,000 or 4,000 rpm, reducing gear shifting and providing a new high-end horsepower levels. The Delivery Valve Kit yields optimum pump output without replacing plungers and barrels. These kits replace key components in the P7100 Bosch pump on 1994-1998 Dodge-Cummins applications and as such are not for a home install! All modifications must be done by a qualified pump technician otherwise damage could result, excessive heat/smoke could be generated and/or poor performance may occur.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Dodge Ram 3500 | V | - | 8 Cyl 5.9L | 360 |
- Governor Spring Kit, 4000rpm - 1994-1998 Dodge 12-valve/P7100 Pump
- P7100 Fuel Pump; 4000 RPM;
- P7100 Governor Spring Kit 4000rpm - Dodge RAM 2500/3500 1994-1998 5.9L 12-Valve Engine
- Governor Spring Kit
- Product Attributes:
- Category: Parts & Accessories
- Engine: 5.9l Cummins 94-98 12 Valve
- Suggested Product: 1040277
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Designed and engineered to enhance the middle and high end throttle response and enable more power thru the entire throttle range
- Comes with intake valve springs
- Only trained, qualified technicians with working knowledge of P7100 pumps should perform these upgrades
- BD's High RPM Mechanical Governor & Delivery Valve Kits can give you the power and torque you've been looking for. The High RPM Mechanical Governor Kit increases the Cummins engine speed to 3,000 or 4,000 rpm, reducing gear shifting and providing a new high-end horsepower levels. The Delivery Valve Kit yields optimum pump output without replacing plungers and barrels. These kits replace key components in the P7100 Bosch pump on 1994-1998 Dodge-Cummins applications and as such are not for a home install! All modifications must be done by a qualified pump technician otherwise damage could result, excessive heat/smoke could be generated and/or poor performance may occur.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Dodge Ram 3500 | V | - | 8 Cyl 5.9L | 360 |
- BD 5.9L Cummins Governor Springs P7100 Pump 3000RPM Dodge 1994-1998 12-valve
- P7100 Fuel Pump; 3000 RPM;
- P7100 Governor Spring Kit 3000rpm - Dodge RAM 2500/3500 1994-1998 5.9L 12-Valve Engine
- Governor Spring Kit
- Product Attributes:
- Category: Parts & Accessories
- Engine: 5.9l Cummins 94-98 12 Valve
- Suggested Product: 1040195
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Designed and engineered to enhance the middle and high end throttle response and enable more power thru the entire throttle range
- Only trained, qualified technicians with working knowledge of P7100 pumps should perform these upgrades
- BD's High RPM Mechanical Governor & Delivery Valve Kits can give you the power and torque you've been looking for. The High RPM Mechanical Governor Kit increases the Cummins engine speed to 3,000 or 4,000 rpm, reducing gear shifting and providing a new high-end horsepower levels. The Delivery Valve Kit yields optimum pump output without replacing plungers and barrels. These kits replace key components in the P7100 Bosch pump on 1994-1998 Dodge-Cummins applications and as such are not for a home install! All modifications must be done by a qualified pump technician otherwise damage could result, excessive heat/smoke could be generated and/or poor performance may occur.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Dodge Ram 3500 | V | - | 8 Cyl 5.9L | 360 |
- P7100 Fuel Control Plate #6 - Dodge 1994-1998 5.9L
- Plate # 6;
- P7100 Fuel Control Plate #6 - Dodge RAM 2500/3500 1994-1998 5.9L 12-Valve Engine
- Fuel Stop
- Product Attributes:
- Fuel Plate No: #6
- Category: Parts & Accessories
- Engine: 5.9l Cummins 94-98 12 Valve
- Suggested Product: 1040186
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Commonly known as a "cam plate
- 1996-1998 Auto 180 HP 420 lbs.-ft --> 250 HP / 635 lbs.-ft (Stock autos will require modifications to handle torque)
- 1996-1998 Auto/Man CALIF 180 HP 420 lbs.-ft --> 250 HP / 635 lbs.-ft (Stock autos will require modifications to handle torque)
- Controls the rack travel which affects the amount of fuel the P7100 fuel pump delivers
- 1996-1998 Man 215 HP 440 lb.-ft --> Not recommended
- Six different ramp designs
- Power gains from 30 to 150 hp and 70 to 300 lb.-ft. of torque
- Calibrated boost tube orifice improves turbo performance
- Strong knowledge of P7100 pump required
- 1994-1995 Auto 160 HP 400 lbs.-ft CPL#'s 1549, 1815, 1959, 1968 --> 230 HP / 605 lbs.-ft
- 1994-1995 Man 175 HP 420 lbs.-ft --> 250 HP / 635 lbs.-ft
- Commonly known as a "cam plate", BD's Fuel Stop Plate controls the rack travel, which affects the amount of fuel the Bosch P7100 fuel pump delivers. Six different ramp designs enable power gains from 30 to 150 hp and 70 to 300 lb.-ft. of torque. A calibrated boost tube orifice is included to improve turbo performance. Strong knowledge of Bosch P7100 pump required.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Dodge Ram 2500 | L | - | 6 Cyl 5.9L | 359 |
- P7100 Fuel Control Plate #10 - Dodge 1994-1998 5.9L
- Plate # 10;
- P7100 Fuel Control Plate #10 - Dodge RAM 2500/3500 1994-1998 5.9L 12-Valve Engine
- Fuel Stop
- Product Attributes:
- Fuel Plate No: #10
- Category: Parts & Accessories
- Engine: 5.9l Cummins 94-98 12 Valve
- Suggested Product: 1040182
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Commonly known as a "cam plate
- 1996-1998 Auto 180 HP 420 lbs.-ft --> 220 HP / 570 lbs.-ft
- 1996-1998 Auto/Man CALIF 180 HP 420 lbs.-ft --> 220 HP / 570 lbs.-ft
- Controls the rack travel which affects the amount of fuel the P7100 fuel pump delivers
- 1996-1998 Man 215 HP 440 lb.-ft --> 330 HP / 750 lbs.-ft (Manual clutch may not handle this rating / Exhaust temps will run hot without airflow improvements)
- Six different ramp designs
- Power gains from 30 to 150 hp and 70 to 300 lb.-ft. of torque
- Calibrated boost tube orifice improves turbo performance
- Strong knowledge of P7100 pump required
- 1994-1995 Auto 160 HP 400 lbs.-ft CPL#'s 1549, 1815, 1959, 1968 --> 200 HP / 550 lbs.-ft
- 1994-1995 Man 175 HP 420 lbs.-ft --> 220 HP / 570 lbs.-ft
- Commonly known as a "cam plate", BD's Fuel Stop Plate controls the rack travel, which affects the amount of fuel the Bosch P7100 fuel pump delivers. Six different ramp designs enable power gains from 30 to 150 hp and 70 to 300 lb.-ft. of torque. A calibrated boost tube orifice is included to improve turbo performance. Strong knowledge of Bosch P7100 pump required.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Dodge Ram 3500 | V | - | 8 Cyl 5.9L | 360 |
- BD Diamond Bite Shim Kit - Dodge 5.9L/6.7L 1994-2018 47RH / 47RE / 48RE / 68RFE
- 47RH / 47RE / 48RE / 68RFE transmissions;
- BD Diamond Bite Shim Kit - Dodge/RAM 5.9L/6.7L 1994-2018 47RH / 47RE / 48RE / 68RFE
- Flexplate Friction Shim
- Product Attributes:
- Category: Flex Plates
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1041208
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Diamond embedded electroless nickel coating creates a micro-bite between the flexplate surfaces
- Significant friction increase protects your flexplate from slipping
- Allows handling of much higher loads and bigger horsepower numbers
- Recommended for high output and heavy duty applications
- You ask a lot from your flexplate. The forces they're put under are extreme and in high performance applications the flexplate can slip; even with correctly installed and torqued bolts! It only takes a small amount movement for the bolts to loosen and allow the flexplate to oscillate against the crankshaft causing costly and catastrophic damage to both parts. BD Diamond Bite Shims with a diamond embedded electroless nickel coating create a micro-bite between the flexplate surfaces giving a significant friction increase. This friction increase stops your flexplate from slipping, allowing it to handle the much higher torque loads expected from a diesel engine. Recommended for high output and heavy duty cummins 1994-up 5.9L/6.7L applications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Dodge Ram 3500 | V | - | 8 Cyl 5.9L | 360 |
- BD 5.9L Cummins Exhaust Manifold Gasket Set Dodge 1988-1998 12-valve
- BD 5.9L Cummins Exhaust Manifold Gasket Set Dodge 1988-1998 12-valve D250/D350/W250/W350/Ram 2500/Ram 3500
- Exhaust Manifold Gaskets
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 5.9l Cummins 94-98 12 Valve
- Suggested Product: 1045989
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Includes gaskets for cylinder head to manifold & manifold to turbo
- Exhaust Manifold Gasket Kit for 1045980, 1045980SS and 1045989 12-valve Manifolds
- Includes gaskets for cylinder head to manifold & manifold to turbo; Exhaust Manifold Gasket Kit for 1045980, 1045980SS and 1045989 12-valve Manifolds
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- BD Super B Killer SX-E S363 Turbo Kit - Dodge 1994-2002 5.9L c/w HX40 Down Pipe
- SX-E S363; HX40; Includes Down Pipe No Turbo Mount Exhaust Brakes/Use Remote Mount Exhaust Brake~Not For Sale on Licensed California Vehicles
- BD Super B Killer SX-E S363 Turbo Kit - Dodge 1994-2002 5.9L 24-valve c/w HX40 Down Pipe
- Super B Killer Turbo Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Category: Single Turbo Performance
- WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
- Engine: 5.9l Cummins 98.5-02 24-valve
- Suggested Product: 1715865
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- BD Single Turbo kits cover a range of turbos that are an easy complete bolt-on performance replacement for your OEM turbo, providing enough air for more power, response and reliability
- BD's HD Waste gate and bracket holds boost and prevents over speed damage
- Turnbuckle Boost Control allows for ease of adjustment for altitude and extreme tuning
- Kit comes with downpipe, V-band clamp, band clamp
- Comp Wheel: 63mm 2.48in
- Turbine Wheel: 76mm 2.99in
- A/R Ratio: 0.80
- Flow: 79 Lb./min
- Approximate rated 550hp (depending on truck configuration)
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- Larger compressor blade surface but with a smaller inducer results in quicker spooling, more flow than similar sized wheels
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- BD exclusive feature of a heavy sprung waste-gated T3 turbine housing that mounts onto stock exhaust manifolds
- All kits come with everything you need to allow for an easy install. Now get these kits with Borg Warner SX-E turbo options and expect even more. A BD exclusive feature of the SX-E turbos is that they are waste-gated to mount on stock T3 manifolds.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- Exhaust Pulse Manifold - Dodge 1988-1998 5.9L 12-valve
- 3 pc.; Use w/12 Valve Motor;
- Exhaust Pulse Manifold - Dodge 1988-1998 5.9L Cummins 12-valve D250/D350/W250/W350/Ram 2500/Ram 3500
- Exhaust Manifold
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 5.9l Cummins 94-98 12 Valve
- Suggested Product: 1040277
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- High-silicon ductile iron
- Designed to withstand extreme temperatures and vibration
- Connection joints allows for expansion and contraction
- Prevents cracking or exhaust leaks
- Includes BD Bolt & Spacer Kit
- Gaskets are available separately (PN: 1045981)
- The perfect drop-in replacement. Fully divided pulse manifold made from high-silicon ductile iron is designed to withstand extreme temperatures and vibration. Designed using modern technology to ensure optimal internal geometry. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increase manifold longevity.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Dodge Ram 3500 | V | - | 8 Cyl 5.9L | 360 |
- BD Turbo T3/T4 Mounting Kit - Dodge 5.9L 1994-2007 HX / HY / S300 / S400
- For HX, HY, S300 and S400 turbos with T3 or T4 mount;
- BD Turbo T3/T4 Mounting Kit - Dodge 5.9L 1994-2007 HX / HY / S300 / S400 RAM 2500/3500
- Turbo Mounting Kit
- Product Attributes:
- Category: Components
- Engine: 5.9l Cummins 98.5-02 24-valve
- Suggested Product: 1045947
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Kit Contents:
- 1 of T3 Open Gasket
- 1 of T4 Split Gasket
- 1 of Oil Drain Gasket
- All Fasteners are at least Class 8.8
- 4 of M10 Small Diameter Flange Nut
- 4 of M10 x 26mm studs
- 4 of M10 x 30mm studs
- 2 of M10 Washers
- 2 of M10 x 45mm Stainless Steel SHCS
- 1 of T3 Split Gasket
- Need to RE&RE your turbo? This handy kit has all the necessary hardware for your turbo re-install to help prevent leaks and to replace any older studs that might be prone to future breakage. Kits includes gaskets, studs and miscellaneous hardware to install T3 & T4 mounted turbos.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
Showing 1 - 10 of 121 products
Loading...