2001 Chevrolet BD Diesel Parts
Choose a Model for your 2001 Chevrolet
Image
Product
Price
- BD End Links - Chevy/GMC 2001-2019 2500 HD / 3500HD Silverado/Sierra
- BD End Links (Pair) - Chevy/GMC 2001-2019 2500 HD / 3500HD Silverado/Sierra
- End Links Set
- Product Attributes:
- Category: Steering
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1032150
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- 1" longer than factory to accommodate upgraded tie rods, and/or leveling kits
- High-strength through bolt design
- OEM style bushing shape for articulation and durability
- Durable Polyurethane bushings
- Installed in approximately 1 hour
- Whether making necessary repairs or upgrades to your steering setup, or running stock to 2" lift or leveling kits, BD's NEW sway bar end links for 2001-2019 Chevy 2500/3500's are your best option to ensure your steering is tight and on the level! Longer, high-strength through bolt design sway bar end links accommodate larger tie rods and leveling kits. Durable polyurethane bushings are designed in the OEM profile to maintain articulation and durability. Leveling kits and lift kits will pull the swaybar out of position, compromising steering geometry. Additionally upgrading tie rods can also cause swaybar interference issues. BD's durable, longer, high-strength, sway bar end links correct sway bar angles and give you the additional clearance you need for those upgraded tie rods. Tighten up the sway bar assembly on your truck and ensure your truck's control is direct and confidence inspiring while avoiding that front end "clunk" that comes with worn out bushings.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Chevrolet Silverado 2500 HD | V | 5967 | 8 Cyl 6.0L | 364 |
- BD Screamer Turbo Duramax LB7 - Chevy/GM 2001-2004 6.6L VICU/VIDR
- Tag Spec VICU and VIDR;
- BD Screamer Turbo Duramax LB7 - Chevy/GM 2001-2004 6.6L VICU/VIDR Silverado/Sierra 2500/3500
- Screamer LB7 Turbo
- Product Attributes:
- Category: Performance Kits
- Engine: Duramax 6.6l 01-04 Lb7
- Suggested Product: 1050322
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- 63mm Billet compressor wheel
- Turbo is preset to approx. 32psi boost
- Upgraded to BD Wastegate Canister
- Max Effort - Highest tune available to achieve the maximum turbo output
- No Core Charge!
- Can support modifications up to 630HP
- Comparing the same tune, same boost, same truck - increase 10hp, lower EGT by 30F and decrease drive by 4.5psi
- More boost, lower drive pressure and decreases peak EGT's
- New technology 64mm "mixed flow" larger turbine wheel increases turbine flow and efficiency
- VSR high speed balanced
- Perfect for any truck with HP levels above stock (towing, street & race use)
- A drop-in, stock-appearing turbo for the Duramax LB7 which utilizes modern-day turbo technology. New compressor and turbine wheels have been designed to give you increased airflow without compromising on low end response. Every turbo has been balanced on a high speed VSR turbo balancer in order to safely increase your boost to 32psi. With supporting modifications, the LB7 Screamer is capable of up to 630hp and works with any "box" tuner.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Chevrolet Silverado 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- BD Duramax Exhaust Manifold Chevy/GMC 2001-2010 LB7/LLY/LBZ/LMM
- Restores Exhaust Flow Balance; High-Silicon Ductile Iron;
- BD Duramax Exhaust Manifold Chevy/GMC 2001-2010 LB7/LLY/LBZ/LMM Silverado/Sierra 2500/3500
- Exhaust Manifold
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: Duramax 6.6l 07.5-10 Lmm
- Suggested Product: 1030050
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Direct, bolt-in replacement
- Tapped to accept the most popular EGT probes
- High-silicon ductile iron
- The BD Full Bore Exhaust Manifold for the Chevy Duramax engine replaces factory driver's side "pinched down" unit, restoring exhaust flow and balances the V8 engine for smother running. Made from high-silicon ductile iron, the Full Bore is a direct, bolt-in replacement for the factory manifold and is even drilled and tapped to accept the most popular EGT probes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Chevrolet Silverado 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- BD Turbo Duramax LB7 - Chevy/GMC 01-04 6.6L (Non-California Spec)
- Tag Spec VICU and VIDR;
- BD Turbo Duramax LB7 - Chevy/GMC 2001-2004 6.6L (Non-California Spec)
- Replacement Stock Turbo
- Product Attributes:
- Category: Stock Replacement
- Engine: Duramax 6.6l 01-04 Lb7
- Suggested Product: 1032150
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Brand NEW replacement unit
- 11-Blade turbine wheel
- 60mm Compressor Wheel Inducer
- 82mm Compressor Wheel Exducer
- VSR high speed balanced
- Preset to 23psi boost
- No Core Charge!
- Brand new replacement unit for Chevy/GMC LB7 Duramax engines. Specializing in remanufacturing turbos, BD offers units for Dodge, Ford, Chevy, Caterpillar, Detroit, Cummins, Komatsu, Toyota, automotive, light duty pick-up, agriculture, marine, commercial, industrial, gas and diesel applications. Quality exchange OEM turbochargers remanufactured in our shop, staffed with experienced industry-leading personnel. Fully equipped with manual and CNC lathes, high speed VSR precision balancer, precision grinders, measuring instruments, pressure blasters and wheelabrators.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Chevrolet Silverado 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- BD-Built Duramax LB7 Injector Stock Reman (0986435502) Chevy/GMC 01-04
- Individual injector; LB7 engine;
- BD-Built Duramax LB7 Injector Stock Reman (0986435502) Chevy/GMC 2001-2004
- Replacement Injector
- Product Attributes:
- Premium Option: Standard
- Category: Stock Injectors
- Power Level: Stock
- Engine: Duramax 6.6l 01-04 Lb7
- Suggested Product: 1050322
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Every injector receives a new Bosch nozzle and control valve.
- All injectors tested and validated on a Bosch 815 test bench. Over 8 operating conditions tested.
- Manufactured by Bosch trained technician
- BD-Built Stock replacement injectors are OE quality, assembled using OE procedures, and fully calibrated and tested to ensure perfect operation.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Chevrolet Silverado 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- BD-Built Performance Duramax LB7 CR Injector Chevy 2001-2004 Stage 2 43%/90hp
- LB7 engine; Stage 2; 90 hp Increase;
- BD-Built Performance Duramax LB7 CR Injector Chevy 2001-2004 - Stage 2 - 43% / 90hp
- Performance Injector
- Product Attributes:
- Category: Performance Injectors & Nozzles
- Power Level: 43% (90hp)
- Engine: Duramax 6.6l 01-04 Lb7
- Suggested Product: 1050141
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Every injector receives a new Bosch nozzle and control valve.
- All injectors tested and validated on a Bosch 815 test bench. Over 8 operating conditions tested.
- Manufactured by Bosch trained technician
- Precision Calibrated to a flow tolerance of +/-2% versus the OEM at +/-5%
- OE quality nozzles are extrude honed
- 43% over - approximately 90hp
- BD-Built Performance injectors are assembled using OE procedures and fully calibrated and tested to ensure perfect operation. Performance injectors increase fuel quantity between 33%-43%, which equates to approximately 60hp-90hp.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Chevrolet Silverado 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- Xtrude Transmission Cooler with Fan - Double Stacked Complete Kit - 5/8in Lines
- 5/8 in. Tubing;
- Xtrude Transmission Cooler with Fan - Double Stacked Complete Kit - 5/8in Lines (Chevy/GMC)
- Xtruded Transmission Cooler
- Product Attributes:
- Category: Trans Coolers
- Engine: Motorhome Diesel Power
- Suggested Product: 1061825
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Large surface area to transfer heat for external air flow cooling
- The pre-wired loomed harness with fuse and relay comes with plug-in connectors
- Chevy Allison 1000 - 5/8-inch Cooler Lines
- Double stacked cores deliver over 40,000 BTU/HR of cooling
- Turbulent oil flow design promotes a more complete cooling
- Over 350% temperature drop versus the factory system
- 136% better temperature drop than XTRUDED single core kit
- Large 5/8-inch ports prevents inlet/outlet restriction
- Furnace brazed rails have been tested to 300psi of pressure
- Thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan
- Kits complete with all fittings, clamps, hoses and hardware
- Build-It-Yourself galvanized bracket kit for quick and easy installation - no wasting time fabricating brackets out of scrap metal
- HOT transmission oil has to be COOLED to keep you on the track. Double stacked cores deliver over 40,000 BTU/HR of cooling and over 350% temperature drop versus the factory system - 36% better temperature drop than BD's standard single core kit. The 200 Micro Extruded passages provide a large surface area to transfer heat for external air flow cooling while turbulent oil flow design promotes a more complete cooling. Large 5/8-inch ports prevents inlet/outlet restriction and furnace brazed rails have been tested to 300psi of pressure. The thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan offers ultimate automatic oil temperature control. Xtruded Transmission Oil Cooler packages come complete with all fittings, clamps, hoses, hardware and a Build-It-Yourself galvanized bracket kit for quicker and cleaner installation - no wasting time fabricating brackets out of scrap metal. The pre-wired loomed harness with fuse and relay comes with OEM style sealed connectors to resist elements and give factory-like install look.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Chevrolet Silverado 3500 HD | V | 5967 | 8 Cyl 6.0L | 364 |
- STEERING UPGRADE KIT CHEVY/GM DURAMAX 1500HD & 2500HD/3500HD 2001-2010
- Comes with Pitman Arm;
- STEERING UPGRADE KIT - CHEVY/GM DURAMAX 1500HD 2001-2003 & 2005-2007 & 2500 HD/3500HD SILVERADO / SIERRA 2001-2010 WITH PITMAN/IDLER
- Steering Upgrade Kit
- Product Attributes:
- Category: Steering
- Engine: Gasoline
- Suggested Product: 1057937
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Forged I-Beam Centerlink 30% stronger than OEM for less deflection
- Forged Centerlink retains factory geometry for accurate steering
- Tie rods 1.5x larger than OEM
- Larger Greaseable Ball Joints for long service life
- Sway bar end links 1-inch longer than factory to accommodate leveling kits
- Durable polyurethane sway bar end link bushings shaped for articulation and durability
- 1-inch longer Sway bar end links prevent damage to Tie Rod Seals/Boots
- Greaseable pitman arm and idler arm
- Compatible with OEM components
- Other upgrade kit designs change the geometry of the steering which can sacrifice safety and drivability for straight-line strength while pulling or racing. This can also create a dangerous "bump steer" where the vehicle becomes uncontrollable on uneven roads. By not altering the steering geometry, the BD upgrade kit saves you from this problem. The total package is an economic upgrade for worn-out steering and will increase the durability, longevity, and dependability of your truck while saving money by preventing catastrophic repairs.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Chevrolet Silverado 2500 HD | V | - | 8 Cyl 8.1L | 496 |
- BD Duramax Flexplate Chevy/GMC 2001-2019
- BD Duramax Flexplate Chevy/GMC 2001-2019 Silverado/Sierra 2500/3500
- Flex Plate
- Product Attributes:
- Category: Flex Plates
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1062224
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Meets SFI 29.3 Approval!
- Direct, bolt-in replacement for the stock unit
- Affordable enough to replace with converter or transmission swap
- Reliably handle up to 1,500 lb.-ft of torque
- Great for racing, towing or stock!
- Twice the material of the stock flex plate
- Forged billet
- Precision-balanced
- Black Oxide coated to resist corrosion and prevents hydrogen embrittlement caused by common zinc plating
- Allows axial thrust unlike solid flywheel conversions
- Fits any OEM or aftermarket torque converter
- BD's FleX-Plate is designed to reliably handle up to 1,500 lb.-ft of torque. These units are forged billet, precision-balanced and SFI approved for use in race application. Black Oxide coated to resist corrosion and prevents hydrogen embrittlement that can cause cracking, these units will fit any OEM or aftermarket torque converter and affordable enough to replace with converter or transmission swap. The BD FleX-Plate is a direct, bolt-in replacement for the stock unit. Great for racing, towing or stock!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Chevrolet Silverado 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- Push/Pull Switch Kit, Exhaust Brake - 3/4in Manual Lever
- 3/4 in. Manual Lever;
- Push/Pull Switch Kit, Exhaust Brake - 3/4-inch Diameter Manual Lever
- Push/Pull Switch Kit
- Product Attributes:
- Category: Mechanical Exhaust Brakes
- Engine: Duramax 6.6l 07.5-10 Lmm
- Suggested Product: 1061830
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Optional power switch for the Exhaust Brake that mounts on the manual transmission shift lever
- For that old school trucker feel this switch is ideal for activating your exhaust brake of other accessories
- Push-Pull style switch
- For 3/4" shift levers
- Dodge 1994-1998
- Ford 1994-1998
- Chevy 1994-up
- Can be used for activating accessories such as light bars, air horns or whatever you need to activate an accessory within finger tip reach
- Optional power switch for the Exhaust Brake that mounts on the manual transmission shift lever; For that old school trucker feel this switch is ideal for activating your exhaust brake of other accessories; Push-Pull style switch; For 3/4" shift levers; Dodge 1994-1998; Ford 1994-1998; Chevy 1994-up; Can be used for activating accessories such as light bars, air horns or whatever you need to activate an accessory within finger tip reach
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Chevrolet Silverado 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
Showing 1 - 10 of 53 products
Loading...