Image
Product
Price
- BD-Built Performance 5.9L Cummins CR Injector Dodge 2004.5-2007 Stage 1 33%/60hp
- Stage 1; 60 hp Increase;
- BD-Built Performance 5.9L Cummins CR Injector Dodge 2004.5-2007 - Stage 1 - 33% / 60hp
- Performance Injector
- Product Attributes:
- Premium Option: Standard
- Category: Performance Injectors & Nozzles
- Power Level: 33% (60hp)
- Engine: 5.9l Cummins 04.5-07
- Suggested Product: 1050156
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Every injector receives a new Bosch nozzle and control valve.
- All injectors tested and validated on a Bosch 815 test bench. Over 8 operating conditions tested.
- Manufactured by Bosch trained technician
- Precision Calibrated to a flow tolerance of +/-2% versus the OEM at +/-5%
- OE quality nozzles are extrude honed
- 33% over - approximately 60hp
- BD-Built Performance injectors are assembled using OE procedures and fully calibrated and tested to ensure perfect operation. Performance injectors increase fuel quantity between 33%-53%, which equates to approximately 60hp-120hp.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- BD Cummins Killer Frost Plug Plate - Dodge/RAM 2003-2018 5.9L/6.7L
- BD Cummins Killer Frost Plug Plate - Dodge/RAM 2003-2018 5.9L/6.7L Cummins
- Killer Frost Plug Plate
- Product Attributes:
- Category: Killer Frost Plug Plate
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1050333
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Works with the frost plug in place, blown out, or leaking
- No need to punch the old frost plug out
- Utilizes one large #333 O-ring
- Works with and without a TCC crossover tube
- Five flanged head bolts to keep the coolant contained
- 6.7L require the bellhousing support bracket to be removed
- Perfect time to install one is when the transmission is removed!
- The coolant pressure inside the engine block can reach 70+psi at high rpm before the thermostat fully opens. This will cause a corroded frost plug to leak. The BD rear frost plug is able to be seal the leak without the need to hammer out the old frost plug. We recommend installing the rear frost plug plate when the transmission is removed. The plate can be installed with the transmission in place, however the surface finish on the back of the motor is critical and must be checked prior to use.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- BD Diamond Bite Shim Kit - Dodge 5.9L/6.7L 1994-2018 47RH / 47RE / 48RE / 68RFE
- 47RH / 47RE / 48RE / 68RFE transmissions;
- BD Diamond Bite Shim Kit - Dodge/RAM 5.9L/6.7L 1994-2018 47RH / 47RE / 48RE / 68RFE
- Flexplate Friction Shim
- Product Attributes:
- Category: Flex Plates
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1041208
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Diamond embedded electroless nickel coating creates a micro-bite between the flexplate surfaces
- Significant friction increase protects your flexplate from slipping
- Allows handling of much higher loads and bigger horsepower numbers
- Recommended for high output and heavy duty applications
- You ask a lot from your flexplate. The forces they're put under are extreme and in high performance applications the flexplate can slip; even with correctly installed and torqued bolts! It only takes a small amount movement for the bolts to loosen and allow the flexplate to oscillate against the crankshaft causing costly and catastrophic damage to both parts. BD Diamond Bite Shims with a diamond embedded electroless nickel coating create a micro-bite between the flexplate surfaces giving a significant friction increase. This friction increase stops your flexplate from slipping, allowing it to handle the much higher torque loads expected from a diesel engine. Recommended for high output and heavy duty cummins 1994-up 5.9L/6.7L applications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- BD Screamer Turbo HE351CW Dodge 5.9L Cummins 2003-2007
- BD Screamer Turbo HE351CW Dodge 5.9L Cummins 2003-2007 Ram 2500/3500
- Screamer Turbo
- Product Attributes:
- Category: Single Turbo Performance
- Engine: 5.9l Cummins 04.5-07
- Suggested Product: 1057931
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- High-flow 76mm large turbine wheel inducer increases turbine flow and efficiency.
- 63mm custom trim Billet Compressor Wheel
- Can support modifications up to 625hp
- More boost, lower drive pressure, and decreased peak EGT's
- Perfect for any truck with HP levels above stock (towing, street & race use)
- Turbo is preset to 30psi boost (BD Wastegate Canister)
- No Core Charge!
- BD's Screamer line of turbos offer drop-in, stock-appearing units that add an additional punch in power without major modifications to intake or exhaust systems. The HE351CW Screamer for the Common Rail 5.9L Dodge Cummins engines feature custom compressor and turbine wheels that have been designed to give you increased airflow without compromising on low end performance. With supporting modifications, the Dodge 5.9L Screamer is capable of up to 625hp and can work with any "box" tuner. The turbine/exhaust outlet is the same as the stock turbo. If you have a turbo mount exhaust brake on your stock turbo it can be transferred to the new Screamer Turbo. If you plan on buying an exhaust brake with this Screamer turbo you should buy according to the year of your truck.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- Wastegate Control Valve - Dodge 2004.5-2007 5.9L
- OEM Replacement Part Made On Or After 7/1/2004
- Wastegate Control Valve - Dodge 2004.5-2007 5.9L Cummins
- Wastegate Control Valve
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Category: Components
- WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
- Engine: 5.9l Cummins 04.5-07
- Suggested Product: 1040023
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- OEM Replacement Part
- OEM Replacement Part
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2005 - Dodge Ram 2500 | Laramie |
- Gasket Set, Exhaust Manifold T4 Mount - Dodge 1998.5-2018 5.9L/6.7L
- T4 Turbo Mount Flange;
- Gasket Set, Exhaust Manifold T4 Mount - Dodge/RAM 1998.5-2018 5.9L/6.7L
- Manifold Gasket Set
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045982
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Exhaust Manifold Gasket Kit for T4 mount 1045995-T4 / 1045996-T4 manifolds
- Exhaust Manifold Gasket Kit includes six cylinder and T4 turbo mount gaskets.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- Exhaust Pulse Manifold w/T6 Mount / 20-degree - Dodge 1998.5-2007 5.9L
- T6 Turbo Mount Flange;
- Exhaust Pulse Manifold withT6 Mount / 20-degree - Dodge 1998.5-2007 5.9L
- Exhaust Manifold
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045986-t6
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Gasket, Bolt and Spacers kits are available separately
- Heavy cast HiSi Ductile Iron retains heat energy
- High temperature black coated
- Drilled and tapped 1/8-NPT ports
- Thick walls allows for drilling/tapping of individual cylinder pyro ports
- Larger runner size helps enhance flow through the manifolds
- Heat expansion joints prevents cracking
- Intended for installation with competition turbos
- Some modifications to vehicle/engine components will be necessary
- No restriction throughout rpm
- Cast ports and runners match inlet gasket within 0.03
- Center Mount can face down or up
- Optimum 20 degree flange helps mounting S400, S500 other larger turbochargers
- Replacement manifolds with larger T4 and T6 flanges for changing out the stock turbo. The turbo stays in same stock location. Fully divided pulse manifold made from high-silicon ductile iron is designed to withstand extreme temperatures and vibration. Great for performance trucks wanting to increase airflow. Designed using modern technology utilizes pulse flow for quicker turbo spool and increased power. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increase manifold longevity.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- BD 5.9L/6.7L Cummins Exhaust Manifold Bolt and Spacer Kit - Dodge 1998.5-2018
- Factory heat shield must be removed;
- BD 5.9L/6.7L Cummins Exhaust Manifold Bolt and Spacer Kit - Dodge/RAM 1998.5-2018
- Exhaust Manifold Bolt Kit
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045986-t6
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Grade 10.9 Hardware meets a balance of high strength and high toughness
- Exhaust spacers ensure fastener operates in elastic stretch without fracture or permanent yield
- Black Oxide coating matches BD manifolds
- Non-Zinc-plated fasteners prevent zinc embrittlement
- Qty 12 Flange Head exhaust bolts (M10x1.5 - 60mm 10.9)
- Qty 12 Black Oxide exhaust spacers
- Qty 2 Stainless Steel Socket Bolts (M10x1.5 - 35mm)
- Qty 2 Stainless Steel M10 Washer
- Typical aftermarket exhaust manifold bolts are much shorter than stock which after numerous heat cycles can cause them to fatigue and start to stretch, leading to exhaust leaks and possible breakage after repeated re-torques. The finish and coating on most of these bolts can also lead to premature corrosion and zinc embrittlement. Replace damaged or corroded exhaust manifold bolts with BD's class 10.9 bolts and black oxide spacers which improve thermal durability to stand up to the heat and non-Zinc plated fasteners prevent zinc embrittlement.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- BD Injector Line Kit Dodge 5.9L Cummins 24-valve 2003-2007
- BD Injector Line Kit Dodge 5.9L Cummins 24-valve 2003-2007 Ram 2500/3500
- Injector Line Set
- Product Attributes:
- Category: Lift Pumps & Fuel Supply
- Engine: 5.9l Cummins 04.5-07
- Suggested Product: 1050551
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- OEM quality
- Corrosion resistant
- Exact fit (no adjustment needed by end user)
- Preformed to the correct factory specifications
- Stock replacement fuel injector feed lines for Cummins 5.9L ISB (24V) engines. Fuel lines get rusty due to constant exposure to the elements, it is strongly recommended by OEM to replace the fuel lines after removal. BD Diesel is providing zinc plated, exact fit fuel lines to allow for corrosion resistance and easy installation. Replaces OE Part #: 5086871AA, 5086872AB, 5086873AB, 5086874AB, 5086875AB, 5086876AD. Replaces Cummins Part #: 3957081, 4988810, 4988809, 5289447, 4988807, 4988806
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- BD Venom Cummins Fuel Lift Pump c/w Filter & Separator Dodge 5.9L/6.7L 2005-2012
- C/w fuel filter and water seperator;
- BD Venom Cummins Fuel Lift Pump c/w Filter & Separator Dodge/RAM 5.9L/6.7L 2005-2012 2500/3500
- Venom Lift Pump Kit
- Product Attributes:
- Category: Lift Pumps & Fuel Supply
- Engine: 6.7l Cummins 07.5-12
- Suggested Product: 1050106
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- 1-1/8in diaphragm-based fuel pressure regulation
- Replacement fuel filter equivalent Donaldson P551315
- Replacement water separator filter equivalent Donaldson P550550
- Preset 15-18 psi
- Updated pump mounting bracket
- Includes commonly sourced water separator & fuel filter
- 165gph supports from stock up to 900hp
- Hard coat billet pump body (military grade)
- Quick connect fittings included - no cutting required
- Ultra-compact design
- The Venom line was developed to replace our FlowMax line with improved max flow rate and better flow control. This pump provides enough fuel flow to support up to 900hp. Unlike typical ball and seat style regulators, our new diaphragm style pressure regulator makes this pump more efficient and helps maintain fuel pressure as flow demand increases. This upgraded pump maintains high fuel pressure, even at high flow, which helps prevent premature injection pump failure by reducing wear. The Venom design supports the gerotor using sealed ball bearings to maintain smooth, reliable operation. A rigid aluminum bracket along with vibration isolators allow for versatile and easy installation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
Showing 1 - 10 of 142 products
Loading...