2005 GMC BD Diesel Parts
Choose a Model for your 2005 GMC
Image
Product
Price
- BD Duramax Screamer Turbo - Chevy 2004.5-2010 LLY/LBZ/LMM
- LLY engine; 2004.5-2005 LLY Turbos require 771864-0001 Adapter Cable;
- BD Duramax Screamer Turbo - Chevy 2004.5-2010 LLY/LBZ/LMM 2500/3500 Silverado/Sierra/Express/Savana
- Screamer Turbo
- Product Attributes:
- Category: Single Turbo Performance
- Engine: Duramax 6.6l 07.5-10 Lmm
- Suggested Product: 1057938
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- 65mm Billet compressor wheel
- Outflows the Garrett Powermax stage 1
- New technology 'mixed flow' larger turbine wheel increases turbo flow and efficiency
- Spools the exact same as an OEM Duramax LBZ turbo
- Up to 85lb/min of airflow
- More boost, lower drive pressure and lower EGT's
- Suggested max 690 crank HP
- VSR high speed balanced
- LLY requires 771864-0001 adapter
- The drop-in, stock-appearing Screamer turbo for the 2004.5-2016 Duramax utilizes modern turbo technology that delivers increased airflow without compromising on low end response. Boost pressure can be increased to improve horsepower potential. Tests with the same tune and fuel quantity showed increased power output and a decrease in peak EGT's. The Duramax Screamer turbo works with any "box" tuner with further improvements achieved with custom tuning.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - GMC Sierra 3500 | V | 6599 | 8 Cyl 6.6L | 403 |
- BD Venom Duramax Fuel Lift Pump c/w Filter & Separator - Chevy 2001-2010 6.6L
- BD Venom Duramax Fuel Lift Pump c/w Filter & Separator - Chevy/GMC 2001-2010 6.6L 2500/3500
- Venom Lift Pump & Filter Kit
- Product Attributes:
- Category: Lift Pumps & Fuel Supply
- Engine: Duramax 6.6l 07.5-10 Lmm
- Suggested Product: 1050651
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- 1-1/8in diaphragm based fuel pressure regulation
- Replacement fuel filter equivalent Donaldson P551315
- Replacement water separator filter equivalent Donaldson P550550
- Preset 8-10psi
- Updated pump mounting bracket
- Includes commonly sourced water separator & fuel filter
- 165gph supports from stock up to 900hp
- Hard coat billet pump body (military grade)
- Quick connect fittings included - no cutting required
- Ultra-compact design
- BD's Venom Lift Pump offers a drop in solution that utilizes ultra-quiet ball bearing technology and with improved pressure regulation and efficiency that has enough fuel flow to support Stroker 900hp pumps. Rated at 165gpm, the Venom Lift Pump will support a single large CP3 or dual-fuel kits with stock High Pressure Fuel Pumps (HPFP). A rigid aluminum bracket along with quiet vibration isolators allow for versatile and easy installation without having to strap mount to the electric motor like with previous models. Kit includes commonly sourced 3-micron fuel filter and 20-micron water separator filter, plus, everything else needed to install using full-size 1/2-inch fuel lines.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - GMC Sierra 3500 | V | 6599 | 8 Cyl 6.6L | 403 |
- Xtrude Transmission Cooler with Fan - Double Stacked Complete Kit - 5/8in Lines
- 5/8 in. Tubing;
- Xtrude Transmission Cooler with Fan - Double Stacked Complete Kit - 5/8in Lines (Chevy/GMC)
- Xtruded Transmission Cooler
- Product Attributes:
- Category: Trans Coolers
- Engine: Motorhome Diesel Power
- Suggested Product: 1061825
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Large surface area to transfer heat for external air flow cooling
- The pre-wired loomed harness with fuse and relay comes with plug-in connectors
- Chevy Allison 1000 - 5/8-inch Cooler Lines
- Double stacked cores deliver over 40,000 BTU/HR of cooling
- Turbulent oil flow design promotes a more complete cooling
- Over 350% temperature drop versus the factory system
- 136% better temperature drop than XTRUDED single core kit
- Large 5/8-inch ports prevents inlet/outlet restriction
- Furnace brazed rails have been tested to 300psi of pressure
- Thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan
- Kits complete with all fittings, clamps, hoses and hardware
- Build-It-Yourself galvanized bracket kit for quick and easy installation - no wasting time fabricating brackets out of scrap metal
- HOT transmission oil has to be COOLED to keep you on the track. Double stacked cores deliver over 40,000 BTU/HR of cooling and over 350% temperature drop versus the factory system - 36% better temperature drop than BD's standard single core kit. The 200 Micro Extruded passages provide a large surface area to transfer heat for external air flow cooling while turbulent oil flow design promotes a more complete cooling. Large 5/8-inch ports prevents inlet/outlet restriction and furnace brazed rails have been tested to 300psi of pressure. The thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan offers ultimate automatic oil temperature control. Xtruded Transmission Oil Cooler packages come complete with all fittings, clamps, hoses, hardware and a Build-It-Yourself galvanized bracket kit for quicker and cleaner installation - no wasting time fabricating brackets out of scrap metal. The pre-wired loomed harness with fuse and relay comes with OEM style sealed connectors to resist elements and give factory-like install look.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - GMC Sierra 3500 | V | 5967 | 8 Cyl 6.0L | 364 |
- BD TIE ROD KIT CHEVY/GM 2001-2010 1500HD/2500 HD/3500HD Silverado/Sierra
- BD TIE ROD KIT CHEVY/GM 2001-2003 & 2005-2007 1500HD & 2001-2010 2500 HD/3500HD Silverado / Sierra
- Tie Rod Upgrade Kit
- Product Attributes:
- Category: Steering
- Engine: Gasoline
- Suggested Product: 1032150
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Tie Rod shaft and inner ball joint is 1.5x larger than OEM
- Larger Greaseable Ball Joints for long service life
- The tie rods are 1.5x thicker than OEM for reduced flex and have larger inner ball joints for reduced wear. Testing has shown the BD tie rods can take over double the amount of force than what OEM rods can handle. Greaseable ball joints come with sintered bearings and allow for better load holding and increased life. A better solution compared to the 'band-aide' Tie Rod Sleeves.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - GMC Sierra 2500 HD | V | - | 8 Cyl 8.1L | 496 |
- BD End Links - Chevy/GMC 2001-2019 2500 HD / 3500HD Silverado/Sierra
- BD End Links (Pair) - Chevy/GMC 2001-2019 2500 HD / 3500HD Silverado/Sierra
- End Links Set
- Product Attributes:
- Category: Steering
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1032150
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- 1" longer than factory to accommodate upgraded tie rods, and/or leveling kits
- High-strength through bolt design
- OEM style bushing shape for articulation and durability
- Durable Polyurethane bushings
- Installed in approximately 1 hour
- Whether making necessary repairs or upgrades to your steering setup, or running stock to 2" lift or leveling kits, BD's NEW sway bar end links for 2001-2019 Chevy 2500/3500's are your best option to ensure your steering is tight and on the level! Longer, high-strength through bolt design sway bar end links accommodate larger tie rods and leveling kits. Durable polyurethane bushings are designed in the OEM profile to maintain articulation and durability. Leveling kits and lift kits will pull the swaybar out of position, compromising steering geometry. Additionally upgrading tie rods can also cause swaybar interference issues. BD's durable, longer, high-strength, sway bar end links correct sway bar angles and give you the additional clearance you need for those upgraded tie rods. Tighten up the sway bar assembly on your truck and ensure your truck's control is direct and confidence inspiring while avoiding that front end "clunk" that comes with worn out bushings.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - GMC Sierra 2500 HD | V | - | 8 Cyl 8.1L | 496 |
- STEERING UPGRADE KIT CHEVY/GM DURAMAX 1500HD & 2500HD/3500HD 2001-2010
- Comes with Pitman Arm;
- STEERING UPGRADE KIT - CHEVY/GM DURAMAX 1500HD 2001-2003 & 2005-2007 & 2500 HD/3500HD SILVERADO / SIERRA 2001-2010 WITH PITMAN/IDLER
- Steering Upgrade Kit
- Product Attributes:
- Category: Steering
- Engine: Gasoline
- Suggested Product: 1057937
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Forged I-Beam Centerlink 30% stronger than OEM for less deflection
- Forged Centerlink retains factory geometry for accurate steering
- Tie rods 1.5x larger than OEM
- Larger Greaseable Ball Joints for long service life
- Sway bar end links 1-inch longer than factory to accommodate leveling kits
- Durable polyurethane sway bar end link bushings shaped for articulation and durability
- 1-inch longer Sway bar end links prevent damage to Tie Rod Seals/Boots
- Greaseable pitman arm and idler arm
- Compatible with OEM components
- Other upgrade kit designs change the geometry of the steering which can sacrifice safety and drivability for straight-line strength while pulling or racing. This can also create a dangerous "bump steer" where the vehicle becomes uncontrollable on uneven roads. By not altering the steering geometry, the BD upgrade kit saves you from this problem. The total package is an economic upgrade for worn-out steering and will increase the durability, longevity, and dependability of your truck while saving money by preventing catastrophic repairs.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - GMC Sierra 2500 HD | V | - | 8 Cyl 8.1L | 496 |
- BD Duramax Flexplate Chevy/GMC 2001-2019
- BD Duramax Flexplate Chevy/GMC 2001-2019 Silverado/Sierra 2500/3500
- Flex Plate
- Product Attributes:
- Category: Flex Plates
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1062224
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Meets SFI 29.3 Approval!
- Direct, bolt-in replacement for the stock unit
- Affordable enough to replace with converter or transmission swap
- Reliably handle up to 1,500 lb.-ft of torque
- Great for racing, towing or stock!
- Twice the material of the stock flex plate
- Forged billet
- Precision-balanced
- Black Oxide coated to resist corrosion and prevents hydrogen embrittlement caused by common zinc plating
- Allows axial thrust unlike solid flywheel conversions
- Fits any OEM or aftermarket torque converter
- BD's FleX-Plate is designed to reliably handle up to 1,500 lb.-ft of torque. These units are forged billet, precision-balanced and SFI approved for use in race application. Black Oxide coated to resist corrosion and prevents hydrogen embrittlement that can cause cracking, these units will fit any OEM or aftermarket torque converter and affordable enough to replace with converter or transmission swap. The BD FleX-Plate is a direct, bolt-in replacement for the stock unit. Great for racing, towing or stock!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - GMC Sierra 3500 | V | 6599 | 8 Cyl 6.6L | 403 |
- BD Duramax Exhaust Manifold Chevy/GMC 2001-2010 LB7/LLY/LBZ/LMM
- Restores Exhaust Flow Balance; High-Silicon Ductile Iron;
- BD Duramax Exhaust Manifold Chevy/GMC 2001-2010 LB7/LLY/LBZ/LMM Silverado/Sierra 2500/3500
- Exhaust Manifold
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: Duramax 6.6l 07.5-10 Lmm
- Suggested Product: 1030050
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Direct, bolt-in replacement
- Tapped to accept the most popular EGT probes
- High-silicon ductile iron
- The BD Full Bore Exhaust Manifold for the Chevy Duramax engine replaces factory driver's side "pinched down" unit, restoring exhaust flow and balances the V8 engine for smother running. Made from high-silicon ductile iron, the Full Bore is a direct, bolt-in replacement for the factory manifold and is even drilled and tapped to accept the most popular EGT probes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - GMC Sierra 3500 | V | 6599 | 8 Cyl 6.6L | 403 |
- Push/Pull Switch Kit, Exhaust Brake - 3/4in Manual Lever
- 3/4 in. Manual Lever;
- Push/Pull Switch Kit, Exhaust Brake - 3/4-inch Diameter Manual Lever
- Push/Pull Switch Kit
- Product Attributes:
- Category: Mechanical Exhaust Brakes
- Engine: Duramax 6.6l 07.5-10 Lmm
- Suggested Product: 1061830
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Optional power switch for the Exhaust Brake that mounts on the manual transmission shift lever
- For that old school trucker feel this switch is ideal for activating your exhaust brake of other accessories
- Push-Pull style switch
- For 3/4" shift levers
- Dodge 1994-1998
- Ford 1994-1998
- Chevy 1994-up
- Can be used for activating accessories such as light bars, air horns or whatever you need to activate an accessory within finger tip reach
- Optional power switch for the Exhaust Brake that mounts on the manual transmission shift lever; For that old school trucker feel this switch is ideal for activating your exhaust brake of other accessories; Push-Pull style switch; For 3/4" shift levers; Dodge 1994-1998; Ford 1994-1998; Chevy 1994-up; Can be used for activating accessories such as light bars, air horns or whatever you need to activate an accessory within finger tip reach
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - GMC Sierra 3500 | V | 6599 | 8 Cyl 6.6L | 403 |
- High Idle Control - 2004-2006 Chev Duramax LLY Automatic w/Cruise Control
- Automatic transmission with Cruise Control; LLYl
- High Idle Control - 2004-2006 Chev Duramax LLY Automatic withCruise Control
- High-Idle Kit
- Product Attributes:
- Category: High Idle
- Engine: Duramax 6.6l 04.5-06 Lly
- Suggested Product: 1050346
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Easy to install
- Faster engine warm-ups
- Adjustable
- Great to use for remote starters, PTO's and extended idling applications
- 2004-2005 LLY 800/1200/1800 RPM
- For when days are short and the nights are cold, you want your engine to heat up quicker. When you are using a PTO, or constantly idling , these are the times, when you need an elevated idle. BD's High Idle kits are easy to install and in most cases adjustable.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - GMC Sierra 3500 | V | 6599 | 8 Cyl 6.6L | 403 |
Showing 1 - 10 of 54 products
Loading...