Image
Product
Price
- BD-Built Performance 5.9L Cummins CR Injector Dodge 2004.5-2007 Stage 1 33%/60hp
- Stage 1; 60 hp Increase;
- BD-Built Performance 5.9L Cummins CR Injector Dodge 2004.5-2007 - Stage 1 - 33% / 60hp
- Performance Injector
- Product Attributes:
- Premium Option: Standard
- Category: Performance Injectors & Nozzles
- Power Level: 33% (60hp)
- Engine: 5.9l Cummins 04.5-07
- Suggested Product: 1050156
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Every injector receives a new Bosch nozzle and control valve.
- All injectors tested and validated on a Bosch 815 test bench. Over 8 operating conditions tested.
- Manufactured by Bosch trained technician
- Precision Calibrated to a flow tolerance of +/-2% versus the OEM at +/-5%
- OE quality nozzles are extrude honed
- 33% over - approximately 60hp
- BD-Built Performance injectors are assembled using OE procedures and fully calibrated and tested to ensure perfect operation. Performance injectors increase fuel quantity between 33%-53%, which equates to approximately 60hp-120hp.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- 90 Degree; For Use w/Straight Outlet Turbo
- Elbow Adapter; 90 Degree; For Use w/Straight Outlet Turbo;
- Elbow Adapter
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
-
Features:
- Add To Straight Outlet Turbo To Mount On 2003-2007 Dodge
- Add to straight outlet turbo to mount on 2003-2007 Dodge
Additional Fitment Information:
| Vehicle |
|---|
| 2006 - Dodge Ram 3500 |
- BD TIE ROD KIT CHEVY/GM 2001-2010 1500HD/2500 HD/3500HD Silverado/Sierra
- BD TIE ROD KIT CHEVY/GM 2001-2003 & 2005-2007 1500HD & 2001-2010 2500 HD/3500HD Silverado / Sierra
- Tie Rod Upgrade Kit
- Product Attributes:
- Category: Steering
- Engine: Gasoline
- Suggested Product: 1032150
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Tie Rod shaft and inner ball joint is 1.5x larger than OEM
- Larger Greaseable Ball Joints for long service life
- The tie rods are 1.5x thicker than OEM for reduced flex and have larger inner ball joints for reduced wear. Testing has shown the BD tie rods can take over double the amount of force than what OEM rods can handle. Greaseable ball joints come with sintered bearings and allow for better load holding and increased life. A better solution compared to the 'band-aide' Tie Rod Sleeves.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Chevrolet Silverado 1500 HD | V | 5967 | 8 Cyl 6.0L | 364 |
- BD End Links - Chevy/GMC 2001-2019 2500 HD / 3500HD Silverado/Sierra
- BD End Links (Pair) - Chevy/GMC 2001-2019 2500 HD / 3500HD Silverado/Sierra
- End Links Set
- Product Attributes:
- Category: Steering
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1032150
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- 1" longer than factory to accommodate upgraded tie rods, and/or leveling kits
- High-strength through bolt design
- OEM style bushing shape for articulation and durability
- Durable Polyurethane bushings
- Installed in approximately 1 hour
- Whether making necessary repairs or upgrades to your steering setup, or running stock to 2" lift or leveling kits, BD's NEW sway bar end links for 2001-2019 Chevy 2500/3500's are your best option to ensure your steering is tight and on the level! Longer, high-strength through bolt design sway bar end links accommodate larger tie rods and leveling kits. Durable polyurethane bushings are designed in the OEM profile to maintain articulation and durability. Leveling kits and lift kits will pull the swaybar out of position, compromising steering geometry. Additionally upgrading tie rods can also cause swaybar interference issues. BD's durable, longer, high-strength, sway bar end links correct sway bar angles and give you the additional clearance you need for those upgraded tie rods. Tighten up the sway bar assembly on your truck and ensure your truck's control is direct and confidence inspiring while avoiding that front end "clunk" that comes with worn out bushings.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - GMC Sierra 2500 HD | V | 5967 | 8 Cyl 6.0L | 364 |
- STEERING UPGRADE KIT CHEVY/GM DURAMAX 1500HD & 2500HD/3500HD 2001-2010
- Comes with Pitman Arm;
- STEERING UPGRADE KIT - CHEVY/GM DURAMAX 1500HD 2001-2003 & 2005-2007 & 2500 HD/3500HD SILVERADO / SIERRA 2001-2010 WITH PITMAN/IDLER
- Steering Upgrade Kit
- Product Attributes:
- Category: Steering
- Engine: Gasoline
- Suggested Product: 1057937
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Forged I-Beam Centerlink 30% stronger than OEM for less deflection
- Forged Centerlink retains factory geometry for accurate steering
- Tie rods 1.5x larger than OEM
- Larger Greaseable Ball Joints for long service life
- Sway bar end links 1-inch longer than factory to accommodate leveling kits
- Durable polyurethane sway bar end link bushings shaped for articulation and durability
- 1-inch longer Sway bar end links prevent damage to Tie Rod Seals/Boots
- Greaseable pitman arm and idler arm
- Compatible with OEM components
- Other upgrade kit designs change the geometry of the steering which can sacrifice safety and drivability for straight-line strength while pulling or racing. This can also create a dangerous "bump steer" where the vehicle becomes uncontrollable on uneven roads. By not altering the steering geometry, the BD upgrade kit saves you from this problem. The total package is an economic upgrade for worn-out steering and will increase the durability, longevity, and dependability of your truck while saving money by preventing catastrophic repairs.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - GMC Sierra 2500 HD | V | 5967 | 8 Cyl 6.0L | 364 |
- BD Cummins Killer Frost Plug Plate - Dodge/RAM 2003-2018 5.9L/6.7L
- BD Cummins Killer Frost Plug Plate - Dodge/RAM 2003-2018 5.9L/6.7L Cummins
- Killer Frost Plug Plate
- Product Attributes:
- Category: Killer Frost Plug Plate
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1050333
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Works with the frost plug in place, blown out, or leaking
- No need to punch the old frost plug out
- Utilizes one large #333 O-ring
- Works with and without a TCC crossover tube
- Five flanged head bolts to keep the coolant contained
- 6.7L require the bellhousing support bracket to be removed
- Perfect time to install one is when the transmission is removed!
- The coolant pressure inside the engine block can reach 70+psi at high rpm before the thermostat fully opens. This will cause a corroded frost plug to leak. The BD rear frost plug is able to be seal the leak without the need to hammer out the old frost plug. We recommend installing the rear frost plug plate when the transmission is removed. The plate can be installed with the transmission in place, however the surface finish on the back of the motor is critical and must be checked prior to use.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- BD 6.0L Powerstroke Exhaust Manifold Set Ford 2003-2007
- BD 6.0L Powerstroke Exhaust Manifold Set Ford 2003-2007 F-250/F-350 SuperDuty
- Exhaust Manifold Set
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 6.0l Powerstroke 03-07
- Suggested Product: 1041483
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Heavy walled manifolds for improved durability
- Coated to resist corrosion
- Pre-drilled for pyrometer probes
- Includes manifold gaskets
- Heavy walled manifolds for improved durability. Manifolds are coated to resist corrosion and are pre-drilled for pyrometer probes. These units replace the old rusted and leaking stock exhaust manifolds that normally require extensive cleaning and machine work to be recovered from warping and distortion. The manifold set comes with both passenger & driver's side units and feed pipe mounting hardware. With the stock manifolds considered a maintenance item due to corrosion and leaking, this set is an excellent preventative replacement item whenever doing other engine work.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Ford F-350 Super Duty | V | - | 8 Cyl 6.0L | 363 |
- BD Iron Horn 5.9L Cummins Turbo Kit S361SXE/76 0.91AR Dodge 2003-2007
- S361SXE/76 0.91 AR Turbo; Includes exhaust manifold;
- BD Iron Horn 5.9L Cummins Turbo Kit S361SXE/76 0.91AR Dodge 2003-2007 RAM 2500/3500
- Iron Horn Turbo Kit
- Product Attributes:
- Category: Single Turbo Performance
- Engine: 5.9l Cummins 04.5-07
- Suggested Product: 1045982
- Wheel Size: S361sxe/76 0.91 Ar
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Increase airflow for more power, response, and reliability
- Replace your factory turbo with a S300 SX-E Borg Warner T4 flange turbo
- Approximate rated 500hp (depending on truck configuration)
- Kit includes a 5.9L 2-piece BD high flow pulse T4 manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- Comp Wheel: 61.44mm 2.42in
- Turbine Wheel: 76mm 2.99in
- A/R Ratio: 0.91
- Flow: 77 Lb./min
- If you are looking for an easy economical turbo upgrade, or, replace your tired turbo and aging exhaust manifold, then BD's Iron Horn series for your 3rd generation 5.9L Cummins offers a clean, drop-in installation. Featuring BorgWarner SX-E cartridges and 2-piece pulse exhaust manifold, BD's Iron Horn turbocharger kits are engineered to give optimal performance while reducing EGT's and high drive pressures. The Iron Horn is available in a number of configurations to match your performance level without compromising drivability.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- Intercooler Hose/Clamp Kit - Dodge 2003-2007 5.9L
- Withstands Over 100 psi; Stainless Steel T-Bar Clamps;
- Intercooler Hose/Clamp Kit - Dodge 2003-2007 5.9L Ram 2500/3500
- Hose & Clamp Kit
- Product Attributes:
- Category: Hose & Clamp
- Engine: 5.9l Cummins 04.5-07
- Suggested Product: 1047154
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Each Hose is designed to meet 3x their working pressure
- Utilizing 4, 5 plies of DuPont Nomex / Aramid fiber (no inferior Polyester is used)
- Higher pressure applications have a Red Iron Oxide internal color
- Flurosilicone elastomers and Fluorocarbon withstands oily residues
- Spring loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles
- Nothing can put an end to a quarter mile pass or hill climb faster than a turbo hose that blows off. Now, you can eliminate this problem with BD's hose and clamp kits. BD boots can withstand over 100 psi of boost and are secured by rugged, spring-loaded, stainless steel clamps. Engineered for each individual application, BD hose and clamp kits are a must for any modified turbo diesel.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- Turbo Stock Replacement HE351CW Dodge 5.9L 2004.5-2007
- 325HP HY35/HE351CW Turbo;
- Turbo Stock Replacement HE351CW Dodge 5.9L 2004.5-2007 Ram 2500/3500
- Turbo Reman Exchange
- Product Attributes:
- Category: Stock Replacement
- Engine: 5.9l Cummins 04.5-07
- Suggested Product: 1045100
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Turbo wastegate is preset to OEM boost levels
- 68mm turbine wheel inducer
- Brand NEW replacement unit
- 60mm Compressor Wheel Inducer
- VSR high speed balanced
- No core charge
- The New BD HE351 CW turbo replacement for the 04.5-07 Dodge 5.9L Cummins engines is manufactured to the highest standards from NEW parts and high speed VSR balanced to ensure precision and quality. BD's stock replacement turbo is a more economical quality replacement for a worn out factory turbo, that may no longer be supplying sufficient boost levels, or might be burning oil.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
Showing 1 - 10 of 267 products
Loading...