Image
Product
Price
- BD Dodge Traction Bars Kit 2003-2018 2500/3500 w/o OEM Rear Airbags
- 4wd; w/o OEM Rear Airbags;
- BD Dodge Traction Bars Kit 2003-2018 2500/3500 witho OEM Rear Airbags
- Traction Bars
- Product Attributes:
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1032050
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- No welding required
- 54-inch eye-to-eye length
- 2-inch OD tube with QA1 3/4-inch heavy duty American rod ends
- Prevents wheel hop, axle wrap and large angles on U-joints
- No adjustment is needed when pulling or hauling
- Designed for trucks ranging from a 6-inch lift all the way to a 2-inch drop
- Polyurethane bushings provide direct loading without excessive movement unlike spring loaded designs
- Optimized to arc in the same path the axle travels during suspension movement which makes for a smooth ride and the ability to tow without having to adjust the bars
- All necessary hardware and Rivet-nut specific drill bit and tool included
- A truck's power doesn't always make it to the road. When the rear axle is allowed to rotate, wheel hop and loss of traction can occur. Get that lost power to the ground with a BD Traction Bar Kit! BD traction bars are engineered to precisely follow the OEM spring travel sweep and axle rotation. This minimizes ride stiffness, and ensures no adjustment is needed when pulling or hauling! Bolt on and built to last, with 2-inch OD tube and the highest quality QA1 heavy duty American-made rod ends rated for 28,000lbs each! Polyurethane bushings provide direct loading without excessive movement, unlike spring loaded designs. Whether you're towing, running a lift kit, bigger tires, high horsepower, competitive pulling or drag racing - make sure to stay in control of that suspension with a BD Traction Bar Kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Dodge Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD-Built Duramax LMM Injector Stock Reman (0986435520) Chevy/GMC 2007-2010
- Individual injector; LMM;
- BD-Built Duramax LMM Injector Stock Reman (0986435520) Chevy/GMC 6.6L 2007-2010
- Replacement Injector
- Product Attributes:
- Premium Option: Standard
- Category: Stock Injectors
- Power Level: Stock
- Engine: Duramax 6.6l 07.5-10 Lmm
- Suggested Product: 1050322
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Every injector receives a new Bosch nozzle and control valve.
- All injectors tested and validated on a Bosch 815 test bench. Over 8 operating conditions tested.
- Manufactured by Bosch trained technician
- BD-Built Stock replacement injectors are OE quality, assembled using OE procedures, and fully calibrated and tested to ensure perfect operation.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - GMC Sierra 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- BD-Built 6.7L Cummins Injector Reman (0986435519) Dodge 2007.5-2010 Cab/Chassis
- Cab and Chassis w/o SCR (Selective Catalytic Reduction) or Urea Blue Filler Cap Tank; Bosch equivalent 0986435519;
- BD-Built 6.7L Cummins Injector Stock Reman (0986435519) Dodge 2007.5-2010 Cab & Chassis w/o SCR
- Stock Injector
- Product Attributes:
- Premium Option: Standard
- Category: Stock Injectors
- Engine: 6.7l Cummins 07.5-12
- Suggested Product: 1050106
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Every injector receives a new Bosch nozzle and control valve.
- All injectors tested and validated on a Bosch 815 test bench. Over 8 operating conditions tested.
- Manufactured by Bosch trained technician
- BD-Built Stock replacement injectors are OE quality, assembled using OE procedures, and fully calibrated and tested to ensure perfect operation.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Dodge Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Duramax High Idle Kit - Chevy 2008-2019 6.6L 2500/3500 - 2019 4500/5500/6500
- BD Duramax High Idle Kit - Chevy/GMC 2008-2019 6.6L 2500 HD / 3500 HD - 2019 Chevy 4500 HD / 5500 HD / 6500 HD
- High-Idle Kit
- Product Attributes:
- Category: High Idle
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1050346
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Easy to install
- Faster engine warm-ups
- Adjustable
- Great to use for remote starters, PTO's and extended idling applications
- 900/1200/1500/1800/2100 RPM
- Bypasses Auto Engine Off functions
- For when days are short and the nights are cold, you want your engine to heat up quicker. When you are using a PTO, or constantly idling , these are the times, when you need an elevated idle. BD's High Idle kits are easy to install and in most cases adjustable.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - GMC Sierra 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- X-Flow Air Intake Heater Kit - Dodge 2008-2018 6.7L Cummins
- For Use with X Intake Elbows;
- X-Flow Air Intake Heater Kit - Dodge/RAM 2008-2018 6.7L Cummins
- X-Flow Air Intake Heater Kit
- Product Attributes:
- Category: Intake
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1041561
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Heater for BD Intake Horns (p/n 1041560 / 1041561 / 1041566) when installed with Intake Open Grid (p/n 1041562 / 1041564)
- Aids cool and cold weather starting
- Connects to stock grid heater wire
- When installing he X-Flow Intake and Open Grid Plate in a Cummins, the factory grid heater is removed. By adding the BD X-Flow Air Intake Heater Kit to your X-Flow Intake you can take advantage of quicker, cleaner cold starts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Dodge Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Iron Horn 6.7L Cummins Turbo Kit S363SXE/76 0.91AR Dodge 2007.5-2018
- S363SXE/76 0.91AR;
- BD Iron Horn 6.7L Cummins Turbo Kit S363SXE/76 0.91AR Dodge/RAM 2007.5-2018 2500/3500
- Iron Horn Turbo Kit
- Product Attributes:
- Category: Single Turbo Performance
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045982
- Wheel Size: S363sxe/76 0.91 Ar
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM VGT turbo, providing enough air for more power, response and reliability
- Comp Wheel: 63mm 2.48in
- Turbine Wheel: 76mm 2.99in
- A/R Ratio: 0.91
- Flow: 79 Lb./min
- Approximate rated 550hp (depending on truck configuration)
- Manifold equipped with EGR ports to retain emissions equipment.
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 6.7L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- Reliability and power! Yes, they go together. The problematic stock Holset turbo can now be replaced with a complete performance option that reduces EGT's and high turbo drive pressures. Save your head gasket and enjoy longer engine life with a significant horsepower increase. Street and track performance from the most complete bolt-on kit on the market!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Dodge Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD 5.9L/6.7L Cummins Exhaust Manifold Bolt and Spacer Kit - Dodge 1998.5-2018
- BD 5.9L/6.7L Cummins Exhaust Manifold Bolt and Spacer Kit - Dodge/RAM 1998.5-2018
- Exhaust Manifold Bolt Kit
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045986-t6
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Grade 10.9 Hardware meets a balance of high strength and high toughness
- Exhaust spacers ensure fastener operates in elastic stretch without fracture or permanent yield
- Black Oxide coating matches BD manifolds
- Non-Zinc-plated fasteners prevent zinc embrittlement
- Qty 12 Flange Head exhaust bolts (M10x1.5 - 60mm 10.9)
- Qty 12 Black Oxide exhaust spacers
- Qty 2 Stainless Steel Socket Bolts (M10x1.5 - 35mm)
- Qty 2 Stainless Steel M10 Washer
- Typical aftermarket exhaust manifold bolts are much shorter than stock which after numerous heat cycles can cause them to fatigue and start to stretch, leading to exhaust leaks and possible breakage after repeated re-torques. The finish and coating on most of these bolts can also lead to premature corrosion and zinc embrittlement. Replace damaged or corroded exhaust manifold bolts with BD's class 10.9 bolts and black oxide spacers which improve thermal durability to stand up to the heat and non-Zinc plated fasteners prevent zinc embrittlement.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Dodge Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Turbo Mounting Kit - Dodge 6.7L 2007.5-2018 HE351 / HE300VG
- For HE351 or HE300VG turbos;
- BD Turbo Mounting Kit - Dodge/RAM 6.7L 2007.5-2018 HE351 / HE300VG
- Turbo Mounting Kit
- Product Attributes:
- Category: Components
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045947
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Kit Contents:
- 4 of M10 Small Diameter Flange Nut
- 4 of M10 x 30mm studs
- 1 of HE3xx Gasket
- 1 of Oil Drain Gasket
- 4 of Dowty Sealing Washers for HE3xx turbo
- Speed sensor o-rings
- All Fasteners are at least Class 8.8
- Need to RE&RE your turbo? This handy kit has all the necessary hardware for your turbo re-install to help prevent leaks and to replace any older studs that might be prone to future breakage. Kits includes gaskets, studs and miscellaneous hardware to install HE351 and HE300VG mounted turbos.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Dodge Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- Gasket Set, Exhaust Manifold T4 Mount - Dodge 1998.5-2018 5.9L/6.7L
- T4 Turbo Mount Flange;
- Gasket Set, Exhaust Manifold T4 Mount - Dodge/RAM 1998.5-2018 5.9L/6.7L
- Manifold Gasket Set
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045982
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Exhaust Manifold Gasket Kit for T4 mount 1045995-T4 / 1045996-T4 manifolds
- Exhaust Manifold Gasket Kit includes six cylinder and T4 turbo mount gaskets.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Dodge Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Duramax Exhaust Manifold Chevy/GMC 2001-2010 LB7/LLY/LBZ/LMM
- Restores Exhaust Flow Balance; High-Silicon Ductile Iron;
- BD Duramax Exhaust Manifold Chevy/GMC 2001-2010 LB7/LLY/LBZ/LMM Silverado/Sierra 2500/3500
- Exhaust Manifold
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: Duramax 6.6l 07.5-10 Lmm
- Suggested Product: 1030050
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Direct, bolt-in replacement
- Tapped to accept the most popular EGT probes
- High-silicon ductile iron
- The BD Full Bore Exhaust Manifold for the Chevy Duramax engine replaces factory driver's side "pinched down" unit, restoring exhaust flow and balances the V8 engine for smother running. Made from high-silicon ductile iron, the Full Bore is a direct, bolt-in replacement for the factory manifold and is even drilled and tapped to accept the most popular EGT probes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - GMC Sierra 2500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
Showing 1 - 10 of 222 products
Loading...