2011 GMC BD Diesel Parts
Choose a Model for your 2011 GMC
Image
Product
Price
- Injector - Chevy 6.6L Duramax 2011-2016 LML Stock Replacement
- Individual injector; LML;
- Injector - Chevy/GMC 6.6L Duramax 2011-2016 LML Stock Replacement
- Replacement Injector
- Product Attributes:
- Category: Stock Injectors
- Engine: Duramax 6.6l 11-16 Lml-lgh
- Suggested Product: 1045830
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Bosch Individual exchange injectors
- Bosch's Remanufactured Diesel Injectors are produced at the same Bosch facility as the new diesel injectors. All wearable parts and critical components are replaced with genuine Bosch parts, and the latest original equipment production technology is used. Bosch remanufactured injectors include all OE updates, so they can often be superior to the OE injectors that they replace.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - GMC Sierra 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- Xtrude Transmission Cooler with Fan - Double Stacked Complete Kit - 5/8in Lines
- 5/8 in. Tubing;
- Xtrude Transmission Cooler with Fan - Double Stacked Complete Kit - 5/8in Lines (Chevy/GMC)
- Xtruded Transmission Cooler
- Product Attributes:
- Category: Trans Coolers
- Engine: Motorhome Diesel Power
- Suggested Product: 1061825
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Large surface area to transfer heat for external air flow cooling
- The pre-wired loomed harness with fuse and relay comes with plug-in connectors
- Chevy Allison 1000 - 5/8-inch Cooler Lines
- Double stacked cores deliver over 40,000 BTU/HR of cooling
- Turbulent oil flow design promotes a more complete cooling
- Over 350% temperature drop versus the factory system
- 136% better temperature drop than XTRUDED single core kit
- Large 5/8-inch ports prevents inlet/outlet restriction
- Furnace brazed rails have been tested to 300psi of pressure
- Thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan
- Kits complete with all fittings, clamps, hoses and hardware
- Build-It-Yourself galvanized bracket kit for quick and easy installation - no wasting time fabricating brackets out of scrap metal
- HOT transmission oil has to be COOLED to keep you on the track. Double stacked cores deliver over 40,000 BTU/HR of cooling and over 350% temperature drop versus the factory system - 36% better temperature drop than BD's standard single core kit. The 200 Micro Extruded passages provide a large surface area to transfer heat for external air flow cooling while turbulent oil flow design promotes a more complete cooling. Large 5/8-inch ports prevents inlet/outlet restriction and furnace brazed rails have been tested to 300psi of pressure. The thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan offers ultimate automatic oil temperature control. Xtruded Transmission Oil Cooler packages come complete with all fittings, clamps, hoses, hardware and a Build-It-Yourself galvanized bracket kit for quicker and cleaner installation - no wasting time fabricating brackets out of scrap metal. The pre-wired loomed harness with fuse and relay comes with OEM style sealed connectors to resist elements and give factory-like install look.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - GMC Sierra 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- BD End Links - Chevy/GMC 2001-2019 2500 HD / 3500HD Silverado/Sierra
- BD End Links (Pair) - Chevy/GMC 2001-2019 2500 HD / 3500HD Silverado/Sierra
- End Links Set
- Product Attributes:
- Category: Steering
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1032150
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- 1" longer than factory to accommodate upgraded tie rods, and/or leveling kits
- High-strength through bolt design
- OEM style bushing shape for articulation and durability
- Durable Polyurethane bushings
- Installed in approximately 1 hour
- Whether making necessary repairs or upgrades to your steering setup, or running stock to 2" lift or leveling kits, BD's NEW sway bar end links for 2001-2019 Chevy 2500/3500's are your best option to ensure your steering is tight and on the level! Longer, high-strength through bolt design sway bar end links accommodate larger tie rods and leveling kits. Durable polyurethane bushings are designed in the OEM profile to maintain articulation and durability. Leveling kits and lift kits will pull the swaybar out of position, compromising steering geometry. Additionally upgrading tie rods can also cause swaybar interference issues. BD's durable, longer, high-strength, sway bar end links correct sway bar angles and give you the additional clearance you need for those upgraded tie rods. Tighten up the sway bar assembly on your truck and ensure your truck's control is direct and confidence inspiring while avoiding that front end "clunk" that comes with worn out bushings.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - GMC Sierra 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- BD Duramax Flexplate Chevy/GMC 2001-2019
- BD Duramax Flexplate Chevy/GMC 2001-2019 Silverado/Sierra 2500/3500
- Flex Plate
- Product Attributes:
- Category: Flex Plates
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1062224
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Meets SFI 29.3 Approval!
- Direct, bolt-in replacement for the stock unit
- Affordable enough to replace with converter or transmission swap
- Reliably handle up to 1,500 lb.-ft of torque
- Great for racing, towing or stock!
- Twice the material of the stock flex plate
- Forged billet
- Precision-balanced
- Black Oxide coated to resist corrosion and prevents hydrogen embrittlement caused by common zinc plating
- Allows axial thrust unlike solid flywheel conversions
- Fits any OEM or aftermarket torque converter
- BD's FleX-Plate is designed to reliably handle up to 1,500 lb.-ft of torque. These units are forged billet, precision-balanced and SFI approved for use in race application. Black Oxide coated to resist corrosion and prevents hydrogen embrittlement that can cause cracking, these units will fit any OEM or aftermarket torque converter and affordable enough to replace with converter or transmission swap. The BD FleX-Plate is a direct, bolt-in replacement for the stock unit. Great for racing, towing or stock!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - GMC Sierra 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- BD Duramax High Idle Kit - Chevy 2008-2019 6.6L 2500/3500 - 2019 4500/5500/6500
- BD Duramax High Idle Kit - Chevy/GMC 2008-2019 6.6L 2500 HD / 3500 HD - 2019 Chevy 4500 HD / 5500 HD / 6500 HD
- High-Idle Kit
- Product Attributes:
- Category: High Idle
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1050346
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Easy to install
- Faster engine warm-ups
- Adjustable
- Great to use for remote starters, PTO's and extended idling applications
- 900/1200/1500/1800/2100 RPM
- Bypasses Auto Engine Off functions
- For when days are short and the nights are cold, you want your engine to heat up quicker. When you are using a PTO, or constantly idling , these are the times, when you need an elevated idle. BD's High Idle kits are easy to install and in most cases adjustable.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - GMC Sierra 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- BD Duramax Screamer Turbo - Chevy 2011-2016 LML
- CARB EO D-553-8 / D-553-11
- BD Duramax Screamer Turbo - Chevy/GMC 2011-2016 LML
- Screamer Turbo
- Product Attributes:
- Category: Single Turbo Performance
- Engine: Duramax 6.6l 11-16 Lml-lgh
- Suggested Product: 1031315
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- 50 State Legal
- 64.0mm Billet compressor wheel
- New technology 'mixed flow' larger turbine wheel increases turbo flow and efficiency
- Up to 80lb/min of airflow
- More boost, lower drive pressure and lower EGT's
- Suggested max 650 crank HP
- VSR high speed balanced
- The drop-in, stock-appearing Screamer turbo for the 2011-2016 Duramax utilizes modern turbo technology that delivers increased airflow without compromising on low end response. Boost pressure can be increased to improve horsepower potential. Tests with the same tune and fuel quantity showed increased power output and a decrease in peak EGT's
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - GMC Sierra 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- BD INJECTOR LINE SET CHEVY/GM 6.6L LML 2011-2016
- BD INJECTOR LINE SET CHEVY/GM 6.6L LML Duramax 2011-2016
- Injector Line Set
- Product Attributes:
- Category: Parts & Accessories
- Engine: Duramax 6.6l 11-16 Lml-lgh
- Suggested Product: 1050323
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- OEM quality
- Corrosion resistant
- Exact fit (no adjustment needed by end user)
- Preformed to the correct factory specifications
- Stock replacement fuel injector feed lines for GM LML 6.6L Duramax engines. Fuel lines get rusty due to constant exposure to the elements, it is strongly recommended by OEM to replace the fuel lines after removal. BD provides zinc-plated, exact-fit fuel lines to allow for corrosion resistance and easy installation. Replaces OE Part #: 12670460 (x2), 12670468 (x2), 12670469 (x2), 12670471 (x2). Kit includes: 2x 1501170 '" Cylinder 1/8, 2x 1501171 '" Cylinder 3/6, 2x 1501172 '" Cylinder 4/5, 2x 1501173 '" Cylinder 2/7
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - GMC Sierra 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- BD Venom CP3 Conversion Kit c/w Standard Pump - Chevy/GMC Duramax 2011-2016
- BD Venom CP3 Conversion Kit c/w Standard Pump - Chevy/GMC Duramax 6.6L 2011-2016 2500/3500
- Venom CP3 Conversion Kit
- Product Attributes:
- Category: Cp3 Conversion
- Engine: Duramax 6.6l 11-16 Lml-lgh
- Suggested Product: 1050323
- Conversion Option: Kit W/stock Cp3 Pump
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Replaces CP4 injection pump with reliable CP3 pump
- Uses LMM Duramax Style CP3 pump
- No tuning required
- EPA compliant
- No core charge
- Go back to a simpler time, when things worked and you could rely on your Duramax fuel system. Since the introduction of the common rail fuel system in 2001, all Duramax Engines were equipped with a reliable Bosch CP3 high pressure fuel pump. Then in 2011, GM made major changes and switched to a Bosch CP4 pump which has seen its share of problems! The CP4 is also susceptible to catastrophic failure. When disaster strikes, the entire fuel system requires replacement after metal debris from the failed pump spreads throughout. Cleaning the tank, replacing lines and injectors, and of course a new pump can end up costing you in excess of $10,000 in repairs! Prevent a costly failure and add durability by backdating your LML Duramax to a CP3 with a conversion kit from BD Diesel. This kit comes with everything you need for install and does not require tuning!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - GMC Sierra 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- BD TS Booster V3.0 - Chevy/GMC
- CARB EO D-553-16
- BD TS Booster V3.0 - Chevy / GMC - Adjust on the fly
- TS Booster
- Product Attributes:
- Category: Throttle Controls
- Engine: Gasoline
- Suggested Product: 1061827
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- 50 state legal
- Easy to install with factory connections
- CARB EO numbers available for many applications with more to come, check out TSBOOSTER.COM for details
- Gas, Diesel & Electric
- Quicker engine response & acceleration
- Reduce Pedal Lag
- Multiple sensitivity settings: Eco, Street, Sport, Race and Ludicrous
- Valet and security modes
- Doesn't affect warranty
- No emission tampering
- Say goodbye to that dead, laggy throttle pedal feeling and enjoy quicker engine response and acceleration with the BD Power TS Booster. The TS Booster amplifies the signal between the throttle pedal and ECM to give a quicker reaction time and forces your performance curve to occur sooner, achieving quicker engine response and a "fly back in your seat" feeling. Factory connections mean a painless install giving you six acceleration levels and a security mode. No need to program, the TS Booster sophisticated A.I. will do the work for you, learning the appropriate settings for your particular application from your throttle inputs. TS Booster doesn't affect warranty or tamper with emissions.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - GMC Sierra 3500 HD | V | 5967 | 8 Cyl 6.0L | 364 |
- BD TS Booster V3.0 - Chevy/GMC
- BD TS Booster V3.0 - Chevy / GMC - Adjust on the fly
- TS Booster
- Product Attributes:
- Category: Throttle Controls
- Engine: Gasoline
- Suggested Product: 1061827
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- 50 state legal
- Easy to install with factory connections
- CARB EO numbers available for many applications with more to come, check out TSBOOSTER.COM for details
- Gas, Diesel & Electric
- Quicker engine response & acceleration
- Reduce Pedal Lag
- Multiple sensitivity settings: Eco, Street, Sport, Race and Ludicrous
- Valet and security modes
- Doesn't affect warranty
- No emission tampering
- Say goodbye to that dead, laggy throttle pedal feeling and enjoy quicker engine response and acceleration with the BD Power TS Booster. The TS Booster amplifies the signal between the throttle pedal and ECM to give a quicker reaction time and forces your performance curve to occur sooner, achieving quicker engine response and a "fly back in your seat" feeling. Factory connections mean a painless install giving you six acceleration levels and a security mode. No need to program, the TS Booster sophisticated A.I. will do the work for you, learning the appropriate settings for your particular application from your throttle inputs. TS Booster doesn't affect warranty or tamper with emissions.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - GMC Yukon XL 2500 | V | 5967 | 8 Cyl 6.0L | 364 |
Showing 1 - 10 of 38 products
Loading...