2017 Ford BD Diesel Parts


Showing 1 - 10 of 17 products
Image
SKU
Product
Rating
Price

BD Diesel
  • BD E-PAS Positive Air Shut-Off 6.7L Powerstroke Ford 2011-2019
  • Plug-In Install;
  • BD E-PAS Positive Air Shut-Off 6.7L Powerstroke Ford 2011-2019 F250/F350/F450/F550
  • Electronic Positive Air Shutdown
  • Product Attributes:
    • Category: Electronic Emergency Engine Shutdown
    • Engine: 6.7l Powerstroke 17-up
    • Suggested Product: 1057932
    • Make: Ford
    • Prop 65 (C, R or CR): Cr
  • Features:
    • Emergency Engine Shutdown
    • Easily removed for truck lease returns
    • Over speed shut down control utilizing built in Intake Air control valve
    • Safely shuts your engine down if over speeding
    • Can be installed in less than 1.5 hours
    • Factory plug in connections and wiring harness
    • Save 3 hours installation labor over mechanical systems
    • Does not set ECM Trouble codes
    • Automatically resets after shut down
    • Only the switch needs a tool to install
  • Like a fire extinguisher in your house, or an earthquake kit, it's always better to be prepared. Although rare, Diesel Engine Runaway is caused when external hydrocarbons are drawn into the engine and can cause over speeding and catastrophic engine failure. Life, limb and your vehicle are put in jeopardy. BD Diesel Performance has you covered should the worst happen with our Electronic Positive Air Shutdown (E-PAS) units by cutting the intake air supply to the cylinders and safely shutting down the engine. The E-PAS controls the electronic throttle body in the intake manifold found on most late model diesel engines by closing it to shut off the air supply in emergency situations. The E-PAS can be easily installed in less than 1.5 hours with factory plug-in connectors and premade wiring harnesses. Automatically resets itself after shutdown and can be easily removed for truck lease returns.

Additional Fitment Information:
Vehicle Block CC Engine CID
2017 - Ford F-350 Super Duty V 6651 8 Cyl 6.7L 406

BD Diesel
  • BD TS Booster V3.0 - Chevy / Dodge / Ford / GMC / Jeep
  • BD TS Booster V3.0 - Chevy / Dodge / Ford / GMC / Jeep - Adjust on the fly
  • TS Booster
  • Product Attributes:
    • Category: Throttle Controls
    • Engine: Jeep
    • Suggested Product: 1061827
    • Make: Ford
    • Prop 65 (C, R or CR): Cr
  • Features:
    • 50 State Legal
    • Gas, Diesel & Electric
    • Quicker engine response & acceleration
    • Reduce Pedal Lag
    • Multiple sensitivity settings: Eco, Street, Sport, Race and Ludicrous
    • Valet and security modes
    • Doesn't affect warranty
    • No emission tampering
    • Easy to install with factory connections
  • Say goodbye to that dead, laggy throttle pedal feeling and enjoy quicker engine response and acceleration with the BD Power TS Booster. The TS Booster amplifies the signal between the throttle pedal and ECM to give a quicker reaction time and forces your performance curve to occur sooner, achieving quicker engine response and a "fly back in your seat" feeling. Factory connections mean a painless install giving you six acceleration levels and a security mode. No need to program, the TS Booster sophisticated A.I. will do the work for you, learning the appropriate settings for your particular application from your throttle inputs. TS Booster doesn't affect warranty or tamper with emissions.

Additional Fitment Information:
Vehicle Block CC Engine CID
2017 - Ford Edge V 3496 6 Cyl 3.5L 213

BD Diesel
  • BD Exhaust Manifold Driver Side Ford F-150 3.5L Ecoboost 2011-2016
  • BD Exhaust Manifold Driver Side Ford 3.5L Ecoboost F-150 2011-2016 / Transit 2015-2023 / Expedition-Navigator 2015-2017 / Lobo 2015-2016
  • Exhaust Manifold Driver Side
  • Product Attributes:
    • Category: Manifolds & Up-pipes
    • Engine: Gasoline
    • Suggested Product: 1043002
    • Make: Ford
    • Prop 65 (C, R or CR): Cr
  • Features:
    • Driver Side
    • Replaces Ford OEM part numbers: BL3Z-9430-B, BL3Z-9430-D
    • Ford Expedition 2015-2017
    • Ford F-150 2011-2016
    • Ford F-150/Lobo 2015-2016
    • Ford Transit 2015-2023
    • Lincoln Mark LT 2011-2014
    • Lincoln Navigator 2015-2017
    • Suggest optional 1043002 addition parts kit for easier install
    • Utilize 3 additional exhaust stud locations
    • BD Thick wall high-silicon ductile cast iron resists thermal warping
    • 15mm longer exhaust studs + spacers
    • New studs, spacers, and nuts included
  • The 2011-2016 Ford 3.5L has an inherent design flaw where not all of the OE stud locations are utilized by the OE manufacturer which leads to warped exhaust manifolds, broken exhaust studs and blown manifold gaskets. The cylinder head on Fords 3.5L Gas Ecoboost has threaded holes for 11 exhaust studs to be used, however the OE manifold only utilizes 8 of those stud locations. BD has designed a manifold that not only utilizes all 11 stud locations, but also improves exhaust flow and has improved durability, the way it should have come from the factory. BD's Ford 3.5L exhaust manifolds are made from thicker-walled high silicone ductile iron designed to resist thermal warping. Each kit includes 11 exhaust spacers and class 8.8 studs designed to further improve thermal durability.

Additional Fitment Information:
Vehicle Block CC Engine CID
2017 - Ford Transit-350 V 3496 6 Cyl 3.5L 213

BD Diesel
  • EXHAUST MANIFOLD PASSENGER SIDE FORD F-150 ECOBOOST 2017-2020 3.5L
  • EXHAUST MANIFOLD PASSENGER SIDE FORD F-150 3.5L ECOBOOST 2017-2020
  • Exhaust Manifold Passenger Side
  • Product Attributes:
    • Category: Manifolds & Up-pipes
    • Engine: Gasoline
    • Suggested Product: 1061718
    • Make: Ford
    • Prop 65 (C, R or CR): Cr
  • Features:
    • Uniform wall thickness casting
    • Extended studs and spacers (15mm Longer)
    • Two (2) additional mounting holes per manifold
    • 16% increase in flow capability
    • Gaskets and hardware included
  • Receive performance and durability with our enhanced Ford 3.5L EcoBoost exhaust manifolds, specifically designed for the 2017-2020 model years. Our BD upgraded manifolds address common exhaust manifold bolt failures by incorporating two additional bolt holes and by utilizing extended fasteners and spacers to better withstand thermal expansion. In addition, we've engineered them to flow 16% better than the OEM to increase efficiency. Crafted with precision, our BD Manifolds boast a robust, thicker design. They are constructed from high-silicon ductile iron to combat warping, ensuring your vehicle remains at peak performance for the long haul.

Additional Fitment Information:
Vehicle Block CC Engine CID
2017 - Ford F-150 V 3496 6 Cyl 3.5L 213

BD Diesel
  • BD 6.7L Powerstroke Exhaust Manifold Passenger Side - Ford 2015-2019
  • CARB EO D-553-17; Includes complete set of longer studs and spacers plus all gaskets;
  • BD 6.7L Powerstroke Exhaust Manifold Passenger Side - Ford 2015-2019 F250 / F350 Pick-up & 2017-2019 F350 / F450 / F550 Cab-Chassis & 2016-2019 F650
  • Exhaust Manifold Passenger Side
  • Product Attributes:
    • Category: Manifolds
    • Engine: 6.7l Powerstroke 11-16
    • Suggested Product: 1043008
    • Make: Ford
    • Prop 65 (C, R or CR): Cr
  • Features:
    • 50 state legal
    • Machined thicker bolting flange
    • Includes the longest stud and spacer kit that fits across all 8-cylinders
    • Longer exhaust studs improve thermal durability
    • Thick spacers are black oxide coated
    • Designed using computation fluid dynamics
    • Exhaust ports are gasket matched
    • High temperature POR 15 black coated
    • Gaskets included: exhaust manifold, cross over tube, EGR port
    • M8 stud install tool included
    • Fully EGR compatible
    • Passenger Side
    • High-silicon ductile cast iron
    • 75% thicker walls retain heat and prevents warping
  • BD focused on solving one of the Ford 6.7L common failures, the exhaust manifolds. Crafted with a heavy duty 0.275" thick-walled Hi-Silicon ductile casting, this makes these manifolds 75% thicker to combat cracking due to high exhaust temperatures. Thermal durability has been improved with longer exhaust studs and spacers plus thicker, more durable machined bolting flanges. Fully EGR compatible, BD's exhaust manifold set is the perfect replacement for reliability and peace of mind.

Additional Fitment Information:
Vehicle Block CC Engine CID
2017 - Ford F-350 Super Duty V 6651 8 Cyl 6.7L 406

BD Diesel
  • BD 6.7L Powerstroke Exhaust Manifold Kit - Ford 2015-2019
  • CARB EO D-553-17; Includes complete set of longer studs and spacers plus all gaskets;
  • BD 6.7L Powerstroke Exhaust Manifold Kit - Ford 2015-2019 F250 / F350 Pick-up & 2017-2019 F350 / F450 / F550 Cab-Chassis & 2016-2019 F650
  • Exhaust Manifold Set
  • Product Attributes:
    • Category: Manifolds
    • Engine: 6.7l Powerstroke 17-up
    • Suggested Product: 1057932
    • Make: Ford
    • Prop 65 (C, R or CR): Cr
  • Features:
    • 50 state legal
    • Longer exhaust studs improve thermal durability
    • Thick spacers are black oxide coated
    • Designed using computation fluid dynamics
    • Exhaust ports are gasket matched
    • High temperature POR 15 black coated
    • Gaskets included: exhaust manifold, cross over tube, EGR port
    • M8 stud install tool included
    • Fully EGR compatible
    • High-silicon ductile cast iron
    • 75% thicker walls retain heat and prevents warping
    • Machined thicker bolting flange
    • Includes the longest stud and spacer kit that fits across all 8-cylinders
  • BD focused on solving one of the Ford 6.7L common failures, the exhaust manifolds. Crafted with a heavy duty 0.275" thick-walled Hi-Silicon ductile casting, this makes these manifolds 75% thicker to combat cracking due to high exhaust temperatures. Thermal durability has been improved with longer exhaust studs and spacers plus thicker, more durable machined bolting flanges. Fully EGR compatible, BD's exhaust manifold set is the perfect replacement for reliability and peace of mind.

Additional Fitment Information:
Vehicle Block CC Engine CID
2017 - Ford F-350 Super Duty V 6651 8 Cyl 6.7L 406

BD Diesel
  • BD 6R140 Transmission Pressure Controller - Ford 11-19 6.7L Powerstroke
  • BD 6R140 Transmission Pressure Controller - Ford 2011-2019 6.7L Powerstroke
  • Pressure Controller
  • Product Attributes:
    • Category: Shift & Pressure Controls
    • Engine: 6.7l Powerstroke 17-up
    • Suggested Product: 1030385
    • Make: Ford
    • Prop 65 (C, R or CR): Cr
  • Features:
    • 76% more theoretical holding power
    • Delivers up to 300psi line pressure at WOT
    • Only active when boost over 15psi, unlike solenoid foolers or plugs which are active all the time
    • Does not create parasitic load or extra heat when inactive
    • No transmission relearn required
    • Installs in under an hour
  • The 6R140 Pressure Controller for 2011-2019 Ford Power Stroke 6.7L pick-ups delivers up to 300psi line pressure inside the transmission, giving 76% more theoretical holding power and helping prevent burned-up clutches - a great way to increase the longevity of the 6R140 transmission for towing, street and race applications. Unlike simple solenoid foolers or plugs which are active all the time, the 6R140 Pressure Controller is only operational when the turbo boost exceeds 15psi, and, does not create extra heat when inactive or cause clunky/unusual shifts. Installs quickly in under an hour.

Additional Fitment Information:
Vehicle Block CC Engine CID
2017 - Ford F-350 Super Duty V 6651 8 Cyl 6.7L 406

BD Diesel
  • Track Bar Kit Ford F-250/F-350 4wd 2017-2022 & F-450/F-550 4wd/2wd 2017-2022
  • 4wd;
  • Track Bar Kit Ford SuperDuty F-250/F-350 4wd 2017-2022 & F-450/F-550 4wd/2wd 2017-2022
  • Track Bar
  • Product Attributes:
    • Category: Suspension
    • Engine: 6.7l Powerstroke 17-up
    • Suggested Product: 1303104-kt
    • Make: Ford
    • Prop 65 (C, R or CR): Cr
  • Features:
    • Long lasting, easily serviceable polyurethane bushing
    • No welded joints
    • OEM Ball joint comes pre-installed
    • Drive straighter with less wander and more positive steering feel
    • Perfect solution for steering stability
    • Helps resolve "Death Wobble
    • Gas & Diesel
    • Fully Adjustable
    • No need to remove bar from the truck to adjust
    • Adjustable to accommodate up to a 6-inch lift
    • Made from high strength, heat treated forged components
    • High quality black Cerakote finish, which resists corrosion and doesn't flake off like powder coat when hit by road debris
  • BD's fully Adjustable Track Bar will fit stock trucks and accommodate those lifted up to 6-inches, plus, there is no need to remove the bar from the truck to adjust. The black Cerakote finished Adjustable Track Bar will allow for correct axle alignment on lifted trucks so they drive straighter with less wander and more positive steering feel. Installation kit comes with long lasting, easily serviceable polyurethane bushing. BD's Adjustable Track Bar is the perfect solution for steering stability.

Additional Fitment Information:
Vehicle Block CC Engine CID
2017 - Ford F-250 Super Duty V 6651 8 Cyl 6.7L 406

BD Diesel
  • Cool Down Timer Kit v2.0
  • Not compatible with push button start on Ford vehicles;
  • Cool Down Timer Kit v2.0 For K-Type EGT Probe
  • Cool Down Timer V2.0
  • Product Attributes:
    • Category: Cool Down Timer
    • Engine: Duramax 6.6l 07.5-10 Lmm
    • Suggested Product: 1081130
    • Make: Ford
    • Prop 65 (C, R or CR): Cr
  • Features:
    • Prevent turbo damage during hot engine shutdown
    • EGT, time and manual controlled shutdown
    • Works with any K-Type EGT probe
    • Compatible with most OEM vehicle security alarms
    • Dodge 1994-2005 5.9L Cummins
    • Ford 1994-2018 PowerStroke 7.3L/6.0L/6.4L/6.7L (w/o Push Button Start)
    • Chevy 2001-2014 Duramax 6.6L
  • Turbochargers operate at high temperatures. The Cool Down Timer is designed to keep the engine running when the ignition is turned off to prevent turbocharger bearing failure that could occur when the engine is shut down, stopping the cool lubricating oil flowing to the turbocharger while it is still hot. If the oil flow is shut off too early, the remaining oil in the bearing housing will overheat causing coking of the bearings which causes both premature bearing wear and reduced oiling of the bearings. Allowing the engine to idle to a minimum operating speed gives the turbocharger time to cool down. The CDT is adjustable for up to 5 minutes of idle time, or optionally works with any K-Type EGT probe for temperature-based shutdown.

Additional Fitment Information:
Vehicle Block CC Engine CID
2017 - Ford F-350 Super Duty V 6651 8 Cyl 6.7L 406

BD Diesel
  • BD Exhaust Manifolds Ford 3.5L Ecoboost F-150 2011-2016 / Transit 2015-2023
  • CARB EO D-553-18
  • BD Exhaust Manifolds Ford 3.5L Ecoboost F-150 2011-2016 / Transit 2015-2023 / Expedition-Navigator 2015-2017 / Lobo 2015-2016
  • Exhaust Manifold Set
  • Product Attributes:
    • Category: Manifolds & Up-pipes
    • Engine: Gasoline
    • Suggested Product: 1043001
    • Make: Ford
    • Prop 65 (C, R or CR): Cr
  • Features:
    • 50-STATE LEGAL!
    • 15mm longer exhaust studs + spacers
    • New studs, spacers, and nuts included
    • Replaces Ford OEM part numbers: BL3Z-9430-B, BL3Z-9430-D, BL3Z-9431-B, BL3Z-9431-D
    • Ford Expedition 2015-2017
    • Ford F-150 2011-2016
    • Ford F-150/Lobo 2015-2016
    • Ford Transit 2015-2023
    • Lincoln Mark LT 2011-2014
    • Lincoln Navigator 2015-2017
    • Suggest optional 1043002 addition parts kit for easier install
    • Average flow increase of 25% (OEM avg 110cfm/port BD avg 139cfm/port)
    • Utilize 3 additional exhaust stud locations
    • BD Thick wall high-silicon ductile cast iron resists thermal warping
  • The 2011-2016 Ford 3.5L has an inherent design flaw where not all of the OE stud locations are utilized by the OE manufacturer which leads to warped exhaust manifolds, broken exhaust studs and blown manifold gaskets. The cylinder head on Fords 3.5L Gas Ecoboost has threaded holes for 11 exhaust studs to be used, however the OE manifold only utilizes 8 of those stud locations. BD has designed a manifold that not only utilizes all 11 stud locations, but also improves exhaust flow and has improved durability, the way it should have come from the factory. BD's Ford 3.5L exhaust manifolds are made from thicker-walled high silicone ductile iron designed to resist thermal warping. Each kit includes 22 exhaust spacers and 22 class 8.8 studs designed to further improve thermal durability.

Additional Fitment Information:
Vehicle Block CC Engine CID
2017 - Ford Transit-350 V 3496 6 Cyl 3.5L 213
Showing 1 - 10 of 17 products

Loading...