2018 Chevrolet BD Diesel Parts
Choose a Model for your 2018 Chevrolet
Image
Product
Price
- BD Chevy 2 Low UnLoc - 4wd 2015-2019 2500-3500 / 2014-2019 1500 / 2015-2020 SUV
- 4wd;
- BD Chevy 2 Low UnLoc - 2015-2019 2500-3500 4wd / 2014-2019 1500 4wd / 2015-2020 SUV 4wd
- 2 Low UnLoc
- Product Attributes:
- Category: Steering
- Engine: Gasoline
- Suggested Product: 1036627
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Installation is simple, the kit plugs in under the hood
- No wire cutting or splicing
- Kit comes with an illuminated rocker switch for control and to indicate when the front axle is being overridden
- Designed to allow the operator to manually disable the front wheel drive mechanism by holding the hubs in the free (2WD) mode with the transfer case in 4WD low range
- By allowing the front wheels to be disengaged, maximum torque is available to the rear wheels
- This will also allow for sharp "All The Way Over" turns without the front axle u-joint hopping or binding
- With this kit installed, the front wheels will NOT be driven through the transfer case
- Allows to have full power and torque while in a high gear reduction applied to the rear axle(s) only
- Vehicle maneuverability is reduced while in 4WD. When the 2Low Unloc is turned on, you disable the front wheel drive mechanism allowing for full torque to be available to the rear wheels only. The front wheels will NOT be driven, delivering normal 2WD maneuverability while in low range! This will also allow for sharp "All The Way Over" turns without the front axle u-joint hopping or binding.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Chevrolet Tahoe | V | 5328 | 8 Cyl 5.3L | 325 |
- BD End Links - Chevy/GMC 2001-2019 2500 HD / 3500HD Silverado/Sierra
- BD End Links (Pair) - Chevy/GMC 2001-2019 2500 HD / 3500HD Silverado/Sierra
- End Links Set
- Product Attributes:
- Category: Steering
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1032150
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- 1" longer than factory to accommodate upgraded tie rods, and/or leveling kits
- High-strength through bolt design
- OEM style bushing shape for articulation and durability
- Durable Polyurethane bushings
- Installed in approximately 1 hour
- Whether making necessary repairs or upgrades to your steering setup, or running stock to 2" lift or leveling kits, BD's NEW sway bar end links for 2001-2019 Chevy 2500/3500's are your best option to ensure your steering is tight and on the level! Longer, high-strength through bolt design sway bar end links accommodate larger tie rods and leveling kits. Durable polyurethane bushings are designed in the OEM profile to maintain articulation and durability. Leveling kits and lift kits will pull the swaybar out of position, compromising steering geometry. Additionally upgrading tie rods can also cause swaybar interference issues. BD's durable, longer, high-strength, sway bar end links correct sway bar angles and give you the additional clearance you need for those upgraded tie rods. Tighten up the sway bar assembly on your truck and ensure your truck's control is direct and confidence inspiring while avoiding that front end "clunk" that comes with worn out bushings.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Chevrolet Silverado 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- Screamer Turbo Chevy/GM 6.6L L5P Duramax 2017-2024
- Screamer Turbo Chevy/GM 6.6L L5P Duramax 2017-2024 Silverado/Sierra 2500/3500
- Screamer L5P Turbo
- Product Attributes:
- Category: Single Turbo Performance
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1061825
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Increased airflow - up to 80lb/min
- Larger 66.2mm billet compressor wheel
- Larger 67mm turbine wheel
- Reduced EGTs at increased power output
- Stock appearing drop in turbo, will work with stock emissions equipment
- Up to 680hp with supporting modifications
- Includes intake horn
- BD's Screamer line of turbos offer drop-in, stock-appearing units that add an additional punch in power without major modifications to intake or exhaust systems. The L5P Screamer for 2017-up Duramax engines feature custom compressor and turbine wheels that have been designed to give you increased airflow without compromising on low end performance. Manufactured using OEM housings, the L5P Screamer turbo is machined to accept the new larger 66.2mm compressor and 67mm turbine wheels which will allow for better airflow (up to 80 lb./min) and lower exhaust gas temperatures. This turbo works best on trucks with supporting modifications such as custom tuning to maximize efficiency. With supporting modifications, the L5P Screamer can achieve up to 680hp.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Chevrolet Silverado 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- BD TS Booster V3.0 - Chevy/GMC
- BD TS Booster V3.0 - Chevy / GMC - Adjust on the fly
- TS Booster
- Product Attributes:
- Category: Throttle Controls
- Engine: Gasoline
- Suggested Product: 1061827
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- 50 state legal
- Easy to install with factory connections
- CARB EO numbers available for many applications with more to come, check out TSBOOSTER.COM for details
- Gas, Diesel & Electric
- Quicker engine response & acceleration
- Reduce Pedal Lag
- Multiple sensitivity settings: Eco, Street, Sport, Race and Ludicrous
- Valet and security modes
- Doesn't affect warranty
- No emission tampering
- Say goodbye to that dead, laggy throttle pedal feeling and enjoy quicker engine response and acceleration with the BD Power TS Booster. The TS Booster amplifies the signal between the throttle pedal and ECM to give a quicker reaction time and forces your performance curve to occur sooner, achieving quicker engine response and a "fly back in your seat" feeling. Factory connections mean a painless install giving you six acceleration levels and a security mode. No need to program, the TS Booster sophisticated A.I. will do the work for you, learning the appropriate settings for your particular application from your throttle inputs. TS Booster doesn't affect warranty or tamper with emissions.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Chevrolet Silverado 3500 HD | V | 5967 | 8 Cyl 6.0L | 364 |
- INJECTOR CONNECTOR PIGTAIL KIT (4-PACK) CHEVY/GM L5P 2017+
- L5P engine;
- INJECTOR CONNECTOR PIGTAIL KIT (4-PACK) CHEVY/GM DURAMAX L5P 2017+
- Injector Connector 4-Pack
- Product Attributes:
- Category: Parts & Accessories
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1050457
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- 8-inch length
- Includes two heat shrink butt connectors
- Easy to install
- Exact fit
- A common failure point on the L5P Duramax, BD's replacement connector with pigtail for the fuel injectors will get you back on the road quickly. The connector is usually replaced at the same time as the injectors and is prone to increased resistance that can cause an injector DTC (P0201-P0208).
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Chevrolet Silverado 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- BD Duramax Flexplate Chevy/GMC 2001-2019
- BD Duramax Flexplate Chevy/GMC 2001-2019 Silverado/Sierra 2500/3500
- Flex Plate
- Product Attributes:
- Category: Flex Plates
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1062224
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Meets SFI 29.3 Approval!
- Direct, bolt-in replacement for the stock unit
- Affordable enough to replace with converter or transmission swap
- Reliably handle up to 1,500 lb.-ft of torque
- Great for racing, towing or stock!
- Twice the material of the stock flex plate
- Forged billet
- Precision-balanced
- Black Oxide coated to resist corrosion and prevents hydrogen embrittlement caused by common zinc plating
- Allows axial thrust unlike solid flywheel conversions
- Fits any OEM or aftermarket torque converter
- BD's FleX-Plate is designed to reliably handle up to 1,500 lb.-ft of torque. These units are forged billet, precision-balanced and SFI approved for use in race application. Black Oxide coated to resist corrosion and prevents hydrogen embrittlement that can cause cracking, these units will fit any OEM or aftermarket torque converter and affordable enough to replace with converter or transmission swap. The BD FleX-Plate is a direct, bolt-in replacement for the stock unit. Great for racing, towing or stock!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Chevrolet Silverado 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- BD Duramax High Idle Kit - Chevy 2008-2019 6.6L 2500/3500 - 2019 4500/5500/6500
- BD Duramax High Idle Kit - Chevy/GMC 2008-2019 6.6L 2500 HD / 3500 HD - 2019 Chevy 4500 HD / 5500 HD / 6500 HD
- High-Idle Kit
- Product Attributes:
- Category: High Idle
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1050346
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Easy to install
- Faster engine warm-ups
- Adjustable
- Great to use for remote starters, PTO's and extended idling applications
- 900/1200/1500/1800/2100 RPM
- Bypasses Auto Engine Off functions
- For when days are short and the nights are cold, you want your engine to heat up quicker. When you are using a PTO, or constantly idling , these are the times, when you need an elevated idle. BD's High Idle kits are easy to install and in most cases adjustable.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Chevrolet Silverado 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- BD Tie Rod Kit - Chevy/GM 2011-2019 2500 HD / 3500HD Silverado/Sierra
- BD Tie Rod Kit - Chevy/GMC 2011-2019 2500 HD / 3500HD Silverado/Sierra c/w Zerk Fitting
- Tie Rod Upgrade
- Product Attributes:
- Category: Steering
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1032126
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Tie Rod shaft and inner ball joint is 1.5x larger than OEM
- Larger Greaseable Ball Joints for long service life
- Optional Zerk fitting included for install
- The tie rods are 1.5x thicker than OEM for reduced flex and have larger inner ball joints for reduced wear. Testing has shown the BD tie rods can take over double the amount of force than what OEM rods can handle. Greaseable ball joints come with sintered bearings and allow for better load holding and increased life. A better solution compared to the 'band-aide' Tie Rod Sleeves.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Chevrolet Silverado 3500 HD | V | 5967 | 8 Cyl 6.0L | 364 |
- INJECTOR CONNECTOR PIGTAIL KIT (SINGLE) CHEVY/GM L5P 2017+
- L5P engine;
- INJECTOR CONNECTOR PIGTAIL KIT (SINGLE) CHEVY/GM DURAMAX L5P 2017+
- Injector Connector
- Product Attributes:
- Category: Parts & Accessories
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1050458
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- 8-inch length
- Includes two heat shrink butt connectors
- Easy to install
- Exact fit
- A common failure point on the L5P Duramax, BD's replacement connector with pigtail for the fuel injectors will get you back on the road quickly. The connector is usually replaced at the same time as the injectors and is prone to increased resistance that can cause an injector DTC (P0201-P0208).
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Chevrolet Silverado 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- BD E-PAS Positive Air Shut-Off - Chevy/GM 6.6L Duramax L5P 2017-2024
- L5P engine;
- BD E-PAS Positive Air Shut-Off - Chevy/GM 6.6L Duramax L5P 2017-2024 2500HD / 3500HD & 2019-2023 4500HD / 5500HD / 6500HD
- Electronic Positive Air Shutdown
- Product Attributes:
- Category: Electronic Emergency Engine Shutdown
- Engine: Duramax 6.6l 17-up L5p
- Suggested Product: 1057937
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Emergency Engine Shutdown
- Over speed shut down control utilizing built in Intake Air control valve
- Safely shuts your engine down if over speeding
- Can be installed in less than 1.5 hours
- Factory plug in connections and wiring harness
- Save 3 hours installation labor over mechanical systems
- Automatically resets after shut down
- Only the switch needs a tool to install
- Easily removed for truck lease returns
- Like a fire extinguisher in your house, or an earthquake kit, it's always better to be prepared. Although rare, Diesel Engine Runaway is caused when external hydrocarbons are drawn into the engine and can cause over speeding and catastrophic engine failure. Life, limb and your vehicle are put in jeopardy. BD Diesel Performance has you covered should the worst happen with our Electronic Positive Air Shutdown (E-PAS) units by cutting the intake air supply to the cylinders and safely shutting down the engine. The E-PAS controls the electronic throttle body in the intake manifold found on most late model diesel engines by closing it to shut off the air supply in emergency situations. The E-PAS can be easily installed in less than 1.5 hours with factory plug-in connectors and premade wiring harnesses. Automatically resets itself after shutdown and can be easily removed for truck lease returns.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Chevrolet Silverado 3500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
Showing 1 - 10 of 17 products
Loading...