2018 Ram BD Diesel Parts
Choose a Model for your 2018 Ram
Image
Product
Price
- BD Dodge Traction Bars Kit 2003-2018 2500/3500 w/o OEM Rear Airbags
- 4wd; w/o OEM Rear Airbags;
- BD Dodge Traction Bars Kit 2003-2018 2500/3500 witho OEM Rear Airbags
- Traction Bars
- Product Attributes:
- Category: Suspension
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1032050
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- No welding required
- 54-inch eye-to-eye length
- 2-inch OD tube with QA1 3/4-inch heavy duty American rod ends
- Prevents wheel hop, axle wrap and large angles on U-joints
- No adjustment is needed when pulling or hauling
- Designed for trucks ranging from a 6-inch lift all the way to a 2-inch drop
- Polyurethane bushings provide direct loading without excessive movement unlike spring loaded designs
- Optimized to arc in the same path the axle travels during suspension movement which makes for a smooth ride and the ability to tow without having to adjust the bars
- All necessary hardware and Rivet-nut specific drill bit and tool included
- A truck's power doesn't always make it to the road. When the rear axle is allowed to rotate, wheel hop and loss of traction can occur. Get that lost power to the ground with a BD Traction Bar Kit! BD traction bars are engineered to precisely follow the OEM spring travel sweep and axle rotation. This minimizes ride stiffness, and ensures no adjustment is needed when pulling or hauling! Bolt on and built to last, with 2-inch OD tube and the highest quality QA1 heavy duty American-made rod ends rated for 28,000lbs each! Polyurethane bushings provide direct loading without excessive movement, unlike spring loaded designs. Whether you're towing, running a lift kit, bigger tires, high horsepower, competitive pulling or drag racing - make sure to stay in control of that suspension with a BD Traction Bar Kit.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD Dodge Front & Rear Differential Cover Pack - 2500 2014-2018 / 3500 2013-2018
- AA 12-9.25 Front / AA 14-11.5 Rear;
- BD Dodge Differential Cover Pack - Front AA 12-9.25 & Rear AA 14-11.5 - RAM 2500 2014-2018 / RAM 3500 2013-2018
- Diff Covers Combo Kit
- Product Attributes:
- Category: Diff Covers
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1061825-rcs
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Front Cover fits AA 12-9.25
- Engineered cover design keeps oil on the gears (Rear)
- Deflects oil back onto the ring gear and into the pinion gear for cooler longer life (Rear)
- Extra capacity sump located at bottom for gears to pick up oil (Rear)
- Gasketless cover has integral re-usable Viton O-Ring (Rear)
- Front Cover capacity 2.7 quarts
- Front Cover is compatible with aftermarket track bars
- Rear Cover fits AA 14-11.5
- Cast Aluminum Internal and external cooling fins
- Separate fill and drain ports
- Magnetic drain plugs
- Stainless steel allen head cap bolts and fill plugs
- Add a stylish look to your front and rear end with a BD Front Diff cover. Made from cast aluminum, BD differential covers have both internal and external fins for extra cooling plus a sleek curved design. Rear cover design deflects the oil back onto the ring gear and into the pinion gear for cooler longer life. Comes with separate fill and drain ports with stainless steel plugs for easier servicing. Includes stainless steel Allen head cap bolts and magnetic drain plug to help capture suspended material in the oil. Designed to be compatible with aftermarket track bars.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Ram 3500 | V | 6424 | 8 Cyl 6.4L | 392 |
- ROADMASTER 68RFE TRANS & PRO FORCE CONVERTER DODGE/RAM 2007.5-2018 4WD
- 4wd; C/w torque converter;
- Roadmaster 68rfe Transmission & Pro Force Converter Dodge/Ram 2007.5-2018 4wd
- Performance Transmission
- Product Attributes:
- Drivetrain: 4wd
- Category: Auto Trans & Converter Packages
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1064043
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Hard anodized valve body and new solenoid pack installed in every unit
- Stock transmission clutch counts
- BD ProForce Torque Converter
- Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
- Billet spring retainer, 4c
- BD reinforced accumulator plate
- BD protect68 valve body
- TCC limit valve machined and sleeved to address high wear area with in pump
- BD pressure enhancer for up to 220psi line pressure
- BD deep sump oil pan
- Stock 68RFE transmission, featuring protect68 kit already installed! Upgraded valve body with BD gasketed separator plate solves common cross leak issues that lead to clutch failure. Complementing the upgraded valve body, a 220psi line pressure module increases transmission reliability and torque holding, while the deep sump aluminum pan increases fluid capacity and cooling. Perfect transmission for stock or mildly tuned trucks with stock or stock-plus injectors! Includes a ProForce billet torque converter. Every ProForce 68RFE converter features an upgraded forged billet cover and upgraded stator for lower rpm response!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD TorqueMaster Dodge 68RFE Transmission & Converter Package 2007.5-18 4wd
- 4wd; Includes Heavy Duty Pan and Billet Input Shaft; Includes multi-disc torque converter;
- BD TorqueMaster Dodge 68RFE Transmission & Converter Package - 2007.5-2018 4wd c/w Billet Input Shaft
- Transmission 68RFE
- Product Attributes:
- Drivetrain: 4wd
- Category: Auto Trans & Converter Packages
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1041221
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- TRANSMISSION:
- Trapezoid teeth design
- Engineered tighter tolerances
- Self-centering trapezoid teeth design increases contact decreases wear and chatter
- BD Deep sump oil pan adds extra fluid and cooling capacity while reducing case flex
- Thrust bearings - not plastic thrust washers
- Riveted piston ensures alignment & eliminates vibration or embrittlement from welding
- Cast stator designs maximizes torque
- New sprag components ensure long term durability
- Furnaced brazed turbine fins for improved fluid coupling efficiency
- Reduced overall weight by 12lbs compared to competitors
- Hard anodized valve body and new solenoid pack installed in every unit
- BD ProTech68 pressure control module ramps up line pressure to 250 psi using MAP sensor to input load and adjust pressure required
- Performance Transmission but with the added touch of a Billet Input Shaft to take the "snap" from rapid throttle and high horsepower
- Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
- Heavy duty cam & roller design low reverse one way clutch
- New 4C billet spring retainer
- Steel girdle added to 2C piston to allow for more clutches and broader apply area
- BD durable QT100 pressure plates allow for increased clutch counts and reduce deflection and distortion within the clutch drum
- Over Drive clutches 33% increase & 2C clutches 33% increase
- Custom Big Stack overdrive shaft
- BD reinforced accumulator plate
- TCC limit valve machined and sleeved to address high wear area with in pump
- TORQUE CONVERTOR:
- Triple Disc
- Enhanced Stall - Street/Towing applications
- HD springs absorb shock of engagement
- Stamp forged 1-piece cover
- Eliminates warpage from clutch heat
- Taller cover can be rebuilt more often
- When you purchase a BD transmission and torque converter package, you are getting a matched set that has been dyno tested together for ultimate performance, and reliability. Every transmission comes with BD's own Heavy Duty pan that adds extra fluid capacity. For towing, street or track, when it comes to a dependable transmission that will stand up to your diesel's power and torque demands, the clear choice is BD.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD 68RFE ProTect68 Pressure Control Kit Cummins 6.7L Dodge 2007.5-2018
- Includes Valve Body Separator Plate, Gaskets and Pressure Control Module;
- BD 68RFE ProTect68 Pressure Control Kit Cummins 6.7L Dodge 2007.5-2018 c/w Separator and Accumulator Plate
- ProTect 68RFE Transmission Kit
- Product Attributes:
- Category: Shift & Pressure Controls
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1062022
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Upgraded 68RFE Accumulator Plate
- Dynamic control ramps up the much larger sweep
- Prevent clutch slippage
- Kit includes pan gasket, 3 doughnut seals and check ball
- Installation takes 2-to-3 hours
- 56% more theoretical holding power
- No full transmission relearn required - quick relearn suggested
- A "fresh" stock transmission will have the ability to handle up to 400hp-450hp
- No tuning required
- Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
- Heavy duty accumulator plate to prevent accumulator blowout
- Pressure Control module delivers up to 250psi clutch apply pressure at full throttle
- Dynamically adjusts hydraulic apply pressures based on turbo boost/engine load
- ProTect68 Transmission Pressure Control kit delivers 150% of the torque holding force to stock transmissions like no others can. Industry leading custom bonded gasket valve body separator plate and gaskets substantially reduces cross leaks compared to stock and other aftermarket kits, even with much higher line pressures. Heavy duty accumulator plate to prevent accumulator blow-out. Electronic Pressure Control module that delivers up to 250 PSI clutch apply pressure providing 150% of the holding force prevents clutch slippage. All of this without modifying the transmission pump or removing the transmission. Controller dynamically adjusts the hydraulic apply pressures based on turbo boost/engine load. No tuning required. Installation takes 2-to-3 hours to complete without having to do a full transmission relearn since no internal tolerances have changed. A "fresh" stock transmission will have the ability to handle up to 450hp. For higher power or demands, a complete BD 68RFE transmission with additional clutches and new designed components is recommended.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- X-Flow Air Intake Heater Kit - Dodge 2008-2018 6.7L Cummins
- For Use with X Intake Elbows;
- X-Flow Air Intake Heater Kit - Dodge/RAM 2008-2018 6.7L Cummins
- X-Flow Air Intake Heater Kit
- Product Attributes:
- Category: Intake
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1041561
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Heater for BD Intake Horns (p/n 1041560 / 1041561 / 1041566) when installed with Intake Open Grid (p/n 1041562 / 1041564)
- Aids cool and cold weather starting
- Connects to stock grid heater wire
- When installing he X-Flow Intake and Open Grid Plate in a Cummins, the factory grid heater is removed. By adding the BD X-Flow Air Intake Heater Kit to your X-Flow Intake you can take advantage of quicker, cleaner cold starts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Iron Horn 6.7L Cummins Turbo Kit S363SXE/76 0.91AR Dodge 2007.5-2018
- S363SXE/76 0.91AR;
- BD Iron Horn 6.7L Cummins Turbo Kit S363SXE/76 0.91AR Dodge/RAM 2007.5-2018 2500/3500
- Iron Horn Turbo Kit
- Product Attributes:
- Category: Single Turbo Performance
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045982
- Wheel Size: S363sxe/76 0.91 Ar
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM VGT turbo, providing enough air for more power, response and reliability
- Comp Wheel: 63mm 2.48in
- Turbine Wheel: 76mm 2.99in
- A/R Ratio: 0.91
- Flow: 79 Lb./min
- Approximate rated 550hp (depending on truck configuration)
- Manifold equipped with EGR ports to retain emissions equipment.
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 6.7L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- Reliability and power! Yes, they go together. The problematic stock Holset turbo can now be replaced with a complete performance option that reduces EGT's and high turbo drive pressures. Save your head gasket and enjoy longer engine life with a significant horsepower increase. Street and track performance from the most complete bolt-on kit on the market!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Screamer 6.7L Cummins Turbo Dodge 2013-2018 Pick-up HE300VG
- CARB EO D-553-14; Direct replacement for stock turbo;
- BD Screamer 6.7L Cummins Turbo RAM 2013-2018 Pick-up HE300VG
- Screamer Performance HE300VG Turbo
- Product Attributes:
- Category: Stock Replacement
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1057932
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- 50-STATE LEGAL!
- Drops in to the stock location
- Can support modifications up to 690HP
- Ballistic Billet 64.5mm 7+7 blade compressor wheel and Low MOI QST 70mm 12 blade turbine wheel
- The QST Turbine wheel has a 15% reduction in MOI (moment of inertia) which results in quicker turbo response
- QST Turbine blade thickness decreased by 25% allowing for higher turbine gas flow and increased efficiency
- Each actuator is calibrated and tested prior to shipping
- VSR high speed balanced
- A drop-in stock installation, stock looking replacement that is anything but stock! The larger Ballistic Billet compressor wheel and our new exclusive Low MOI QST turbine wheel results in reduced backpressure, quicker response, increased efficiency and increased turbine flow compared to the competition. This results in increased maximum potential power output, right up to 690 horsepower with performance modifications. No extra parts to install, just drop-in and enjoy the extra power potential.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- Screamer Turbo Manifold Package RAM 6.7L Cummins 2013-2018
- Direct replacement for stock turbo and exhaust manifold;
- Screamer Turbo Manifold Package RAM 6.7L Cummins 2013-2018 2500/3500
- Screamer Turbo & Manifold Package
- Product Attributes:
- Category: Stock Replacement
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1045965
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- TURBOCHARGER:
- Experience quick spool times and low drive pressures with an overall increase in performance
- 50-STATE LEGAL!
- Fully EGR compatible
- Open throat outlet flange outperforms the stock manifold
- CARB EO No D-553-5
- Drops in to the stock location
- Can support modifications up to 690HP
- Ballistic Billet 64.5mm 7+7 blade compressor wheel and Low MOI QST 70mm 12 blade turbine wheel
- The QST Turbine wheel has a 15% reduction in MOI (moment of inertia) which results in quicker turbo response
- QST Turbine blade thickness decreased by 25% allowing for higher turbine gas flow and increased efficiency
- VSR high speed balanced
- Each actuator is calibrated and tested prior to shipping
- MANIFOLD:
- Pre-drilled for pyrometer probes
- Gasket, Bolt and Spacers kits are available separately
- 6.7L performance stock replacement manifold for use with the Holset HE351 Turbo
- Cast of high silicon ductile iron to withstand extreme temperature cycling caused during DPF regeneration
- Larger porting design than others will handle any increase in power
- Thick walled casting and integral slip joint prevents cracking and exhaust leaks
- A drop-in stock installation, stock looking replacement that is anything but stock! The larger Ballistic Billet compressor wheel and our new exclusive Low MOI QST turbine wheel results in reduced backpressure, quicker response, increased efficiency and increased turbine flow compared to the competition. This results in increased maximum potential power output, right up to 690 horsepower with supporting modifications. No extra parts to install, just drop-in and enjoy the extra power potential. Perfectly paired with a pulse manifold made from high-silicon ductile iron and designed to withstand extreme temperatures and vibration. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increases manifold longevity.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD Dodge Ram Patriot Fuel Plug / Cap - 2013-2018 6.7L / 2014-2018 3.0L ECO
- BD Dodge Ram Patriot Fuel Plug / Cap - 2013-2018 6.7L Cummins / 2014-2018 3.0L ECO
- Patriot Diesel Fuel Plug / Cap
- Product Attributes:
- Category: Parts & Accessories
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1061525
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Plug cap-less fuel filler neck
- Anodized billet aluminum
- O-ring ensures a tight fit prevents contaminates entering your fuel tank
- Magnetized base allows attachment to prevent loss when fueling
- No assembly required
- Unique gun cylinder design
- Insert spent 9mm casings (not included) for custom revolver look
- Multi functional bottle opener
- Plug cap-less fuel filler neck; Anodized billet aluminum; O-ring ensures a tight fit prevents contaminates entering your fuel tank; Magnetized base allows attachment to prevent loss when fueling; No assembly required; Unique gun cylinder design; Insert spent 9mm casings (not included) for custom revolver look; Multi functional bottle opener
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
Showing 1 - 10 of 49 products
Loading...