Image
Product
Price
- BD E-PAS Positive Air Shut-Off 6.7L Powerstroke Ford 2020-2024 F-Series
- Plug-In Install;
- BD E-PAS Positive Air Shut-Off 6.7L Powerstroke Ford 2020-2024 F-Series SuperDuty F250/F350/F450/F550
- Electronic Positive Air Shutdown
- Product Attributes:
- Category: Electronic Emergency Engine Shutdown
- Engine: 6.7l Powerstroke 17-up
- Suggested Product: 1036612
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Emergency Engine Shutdown
- Easily removed for truck lease returns
- Over speed shut down control utilizing built in Intake Air control valve
- Safely shuts your engine down if over speeding
- Can be installed in less than 1.5 hours
- Factory plug in connections and wiring harness
- Save 3 hours installation labor over mechanical systems
- Does not set ECM Trouble codes
- Automatically resets after shut down
- Only the switch needs a tool to install
- Like a fire extinguisher in your house, or an earthquake kit, it's always better to be prepared. Although rare, Diesel Engine Runaway is caused when external hydrocarbons are drawn into the engine and can cause over speeding and catastrophic engine failure. Life, limb and your vehicle are put in jeopardy. BD Diesel Performance has you covered should the worst happen with our Electronic Positive Air Shutdown (E-PAS) units by cutting the intake air supply to the cylinders and safely shutting down the engine. The E-PAS controls the electronic throttle body in the intake manifold found on most late model diesel engines by closing it to shut off the air supply in emergency situations. The E-PAS can be easily installed in less than 1.5 hours with factory plug-in connectors and premade wiring harnesses. Automatically resets itself after shutdown and can be easily removed for truck lease returns.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ford F-350 Super Duty | V | 6651 | 8 Cyl 6.7L | 406 |
- BD E-PAS Positive Air Shut-Off 6.7L Cummins Dodge 2019-2024 Pick-up/Cab-Chassis
- Plug-In Install;
- BD E-PAS Positive Air Shut-Off 6.7L Cummins - Dodge 2019-2024 Pick-up / Cab-Chassis
- Electronic Positive Air Shutdown
- Product Attributes:
- Category: Electronic Emergency Engine Shutdown
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1057932
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Emergency Engine Shutdown
- Easily removed for truck lease returns
- Over speed shut down control utilizing built in Intake Air control valve
- Safely shuts your engine down if over speeding
- Can be installed in less than 1.5 hours
- Factory plug in connections and wiring harness
- Save 3 hours installation labor over mechanical systems
- Does not set ECM Trouble codes
- Automatically resets after shut down
- Only the switch needs a tool to install
- Like a fire extinguisher in your house, or an earthquake kit, it's always better to be prepared. Although rare, Diesel Engine Runaway is caused when external hydrocarbons are drawn into the engine and can cause over speeding and catastrophic engine failure. Life, limb and your vehicle are put in jeopardy. BD Diesel Performance has you covered should the worst happen with our Electronic Positive Air Shutdown (E-PAS) units by cutting the intake air supply to the cylinders and safely shutting down the engine. The E-PAS controls the electronic throttle body in the intake manifold found on most late model diesel engines by closing it to shut off the air supply in emergency situations. The E-PAS can be easily installed in less than 1.5 hours with factory plug-in connectors and premade wiring harnesses. Automatically resets itself after shutdown and can be easily removed for truck lease returns.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ram 5500 | L | - | 6 Cyl 6.7L | 408 |
- BD TS Booster V3.0 - Chevy / Dodge / Ford / GMC / Jeep
- BD TS Booster V3.0 - Chevy / Dodge / Ford / GMC / Jeep - Adjust on the fly
- TS Booster
- Product Attributes:
- Category: Throttle Controls
- Engine: Jeep
- Suggested Product: 1061827
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- 50 State Legal
- Gas, Diesel & Electric
- Quicker engine response & acceleration
- Reduce Pedal Lag
- Multiple sensitivity settings: Eco, Street, Sport, Race and Ludicrous
- Valet and security modes
- Doesn't affect warranty
- No emission tampering
- Easy to install with factory connections
- Say goodbye to that dead, laggy throttle pedal feeling and enjoy quicker engine response and acceleration with the BD Power TS Booster. The TS Booster amplifies the signal between the throttle pedal and ECM to give a quicker reaction time and forces your performance curve to occur sooner, achieving quicker engine response and a "fly back in your seat" feeling. Factory connections mean a painless install giving you six acceleration levels and a security mode. No need to program, the TS Booster sophisticated A.I. will do the work for you, learning the appropriate settings for your particular application from your throttle inputs. TS Booster doesn't affect warranty or tamper with emissions.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Cadillac XT5 | L | 1998 | 4 Cyl 2.0L | 122 |
- BD TS Booster V3.0 - Chevy / GMC / Dodge / Jeep / Fiat / Nissan
- BD TS Booster V3.0 - Chevy / GMC / Dodge / Jeep / Fiat / Nissan - Adjust on the fly
- TS Booster
- Product Attributes:
- Category: Throttle Sensitivity Booster
- Engine: Nissan Titan
- Suggested Product: 1061827
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- 50 State Legal
- Gas, Diesel & Electric
- Quicker engine response & acceleration
- Reduce Pedal Lag
- Multiple sensitivity settings: Eco, Street, Sport, Race and Ludicrous
- Valet and security modes
- Doesn't affect warranty
- No emission tampering
- Easy to install with factory connections
- Say goodbye to that dead, laggy throttle pedal feeling and enjoy quicker engine response and acceleration with the BD Power TS Booster. The TS Booster amplifies the signal between the throttle pedal and ECM to give a quicker reaction time and forces your performance curve to occur sooner, achieving quicker engine response and a "fly back in your seat" feeling. Factory connections mean a painless install giving you six acceleration levels and a security mode. No need to program, the TS Booster sophisticated A.I. will do the work for you, learning the appropriate settings for your particular application from your throttle inputs. TS Booster doesn't affect warranty or tamper with emissions.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Jeep Gladiator | V | 3604 | 6 Cyl 3.6L | 220 |
- Exhaust Manifold Kit Dodge/RAM 1500/2500/3500 2009-2024 5.7L HEMI
- Exhaust Manifold Kit 5.7L HEMI Dodge 1500-2500 2009-2010 / RAM 1500(Classic) 2011-2024 / RAM 2500-3500 2011-2018
- Exhaust Manifold Set
- Product Attributes:
- Category: Manifolds
- Engine: Gasoline
- Suggested Product: 1057932
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- DOES NOT FIT 2019+ DT BODY STYLE - Use?1041467
- Made with high-silicon ductile iron
- Uniform wall thickness throughout the entire manifold to prevent warping or cracking
- Utilizes longer bolts and added spacers to reduce stress on fasteners
- Machined bolt mating surfaces for secure bolted joint
- New independent mounting location for the heat shield to further reduce stress on fasteners
- Kit includes all new bolts, nuts, spacers, and gaskets
- Manifolds available as left only (Driver's side) PN: 1041465 and right only (Passenger side) PN: 1041464
- Experience unparalleled performance and durability with our enhanced Dodge/RAM truck exhaust manifolds, specifically designed for 5.7L HEMI engines. Our BD upgraded manifolds address common exhaust manifold bolt failures by incorporating extended fasteners and spacers that effectively withstand thermal expansion. In addition, we've engineered independent mounting locations for the heat shield, separating it from the mounting bolts to further enhance reliability. Crafted with precision, our BD Manifolds boast a robust, thicker design, and are constructed from high-silicon ductile iron to combat warping, ensuring your vehicle remains at peak performance for the long haul.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ram 1500 Classic | V | - | 8 Cyl 5.7L | 345 |
- BD Exhaust Manifold Driver Side Ford F-150 3.5L Ecoboost 2011-2016
- BD Exhaust Manifold Driver Side Ford 3.5L Ecoboost F-150 2011-2016 / Transit 2015-2023 / Expedition-Navigator 2015-2017 / Lobo 2015-2016
- Exhaust Manifold Driver Side
- Product Attributes:
- Category: Manifolds & Up-pipes
- Engine: Gasoline
- Suggested Product: 1043002
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Driver Side
- Replaces Ford OEM part numbers: BL3Z-9430-B, BL3Z-9430-D
- Ford Expedition 2015-2017
- Ford F-150 2011-2016
- Ford F-150/Lobo 2015-2016
- Ford Transit 2015-2023
- Lincoln Mark LT 2011-2014
- Lincoln Navigator 2015-2017
- Suggest optional 1043002 addition parts kit for easier install
- Utilize 3 additional exhaust stud locations
- BD Thick wall high-silicon ductile cast iron resists thermal warping
- 15mm longer exhaust studs + spacers
- New studs, spacers, and nuts included
- The 2011-2016 Ford 3.5L has an inherent design flaw where not all of the OE stud locations are utilized by the OE manufacturer which leads to warped exhaust manifolds, broken exhaust studs and blown manifold gaskets. The cylinder head on Fords 3.5L Gas Ecoboost has threaded holes for 11 exhaust studs to be used, however the OE manifold only utilizes 8 of those stud locations. BD has designed a manifold that not only utilizes all 11 stud locations, but also improves exhaust flow and has improved durability, the way it should have come from the factory. BD's Ford 3.5L exhaust manifolds are made from thicker-walled high silicone ductile iron designed to resist thermal warping. Each kit includes 11 exhaust spacers and class 8.8 studs designed to further improve thermal durability.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ford Transit-350 | V | 3496 | 6 Cyl 3.5L | 213 |
- EXHAUST MANIFOLD DS DODGE/RAM 1500/2500/3500 09-24 5.7L HEMI
- EXHAUST MANIFOLD DRIVER SIDE DODGE/RAM 1500/2500/3500 09-24 5.7L HEMI
- Exhaust Manifold Drivers Side
- Product Attributes:
- Category: Manifolds
- Engine: Gasoline
- Suggested Product: 1041463
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Made with high-silicon ductile iron
- Uniform wall thickness throughout the entire manifold to prevent warping or cracking
- Utilizes longer bolts and added spacers to reduce stress on fasteners
- Machined bolt mating surfaces for secure bolted joint
- New independent mounting location for the heat shield to further reduce stress on fasteners
- Kit includes all new bolts, nuts, spacers, and gaskets
- Available as a kit (both sides) PN: 1041463 or right only (passenger side) PN: 1041464
- This product fits 2011-2022 Dodge Durango & Jeep Grand Cherokee
- Experience unparalleled performance and durability with our enhanced Dodge/RAM truck exhaust manifolds, specifically designed for 5.7L HEMI engines. Our BD upgraded manifolds address common exhaust manifold bolt failures by incorporating extended fasteners and spacers that effectively withstand thermal expansion. In addition, we've engineered independent mounting locations for the heat shield, separating it from the mounting bolts to further enhance reliability. Crafted with precision, our BD Manifolds boast a robust, thicker design, and are constructed from high-silicon ductile iron to combat warping, ensuring your vehicle remains at peak performance for the long haul.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ram 1500 Classic | V | - | 8 Cyl 5.7L | 345 |
- BD 68RFE/Aisin AS69RC Cooler Bypass Delete - Dodge/RAM 2019-2024 6.7L
- 68RFE or Aisin AS69RC transmission;
- BD 68RFE/Aisin AS69RC Cooler Bypass Delete - Dodge/RAM 2019-2024 6.7L 2500/3500/4500/5500
- Thermostat Bypass
- Product Attributes:
- Category: Trans Coolers
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1030606-1/2
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Ensures 100% fluid flow through the transmission cooler
- Keeps your transmission temperature as low as possible
- Fits 68RFE & Aisin AS69RC Transmission
- Eliminates factory bypass valve
- Debris in the stock cooler bypass valve can cause it to jam the internal valve keeping it in recirculation mode. When this happens the transmission temperature will rise and can lead to overheating and premature transmission failure. The BD Cooler Bypass Delete keeps the transmission cooler operational all the time and eliminates this failure prone item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ram 4500 | L | - | 6 Cyl 6.7L | 408 |
- BD E-PAS Positive Air Shut-Off - Chevy/GM 3.0L Duramax 2019-2024
- BD E-PAS Positive Air Shut-Off - Chevy/GM 3.0L Duramax 2019-2024 Pick-Up/SUV
- Electronic Positive Air Shutdown
- Product Attributes:
- Category: Electronic Emergency Engine Shutdown
- Engine: Duramax 2.8l
- Suggested Product: 1057937
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Emergency Engine Shutdown
- Over speed shut down control utilizing built in Intake Air control valve
- Safely shuts your engine down if over speeding
- Can be installed in less than 1.5 hours
- Factory plug in connections and wiring harness
- Save 3 hours installation labor over mechanical systems
- Automatically resets after shut down
- Only the switch needs a tool to install
- Easily removed for truck lease returns
- Like a fire extinguisher in your house, or an earthquake kit, it's always better to be prepared. Although rare, Diesel Engine Runaway is caused when external hydrocarbons are drawn into the engine and can cause over speeding and catastrophic engine failure. Life, limb and your vehicle are put in jeopardy. BD Diesel Performance has you covered should the worst happen with our Electronic Positive Air Shutdown (E-PAS) units by cutting the intake air supply to the cylinders and safely shutting down the engine. The E-PAS controls the electronic throttle body in the intake manifold found on most late model diesel engines by closing it to shut off the air supply in emergency situations. The E-PAS can be easily installed in less than 1.5 hours with factory plug-in connectors and premade wiring harnesses. Automatically resets itself after shutdown and can be easily removed for truck lease returns.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Chevrolet Silverado 1500 | L | 2993 | 6 Cyl 3.0L | 183 |
- KILLER GRID HEATER UPGRADE KIT DODGE/RAM 6.7L CUMMINS 2500/3500 2007-2024
- KILLER GRID HEATER UPGRADE KIT DODGE/RAM 6.7L CUMMINS 2500/3500/4500/5500 2007-2024
- GRID HEATER UPGRADE KIT
- Product Attributes:
- Category: Intake
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1040023
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Eliminates both problematic nuts found in the OE grid heater by fastening directly into the lower busbar
- Allows for full heat output with the stock intake grid heater
- Fully emissions compliant
- Easy installation with minor modification required for 2007-2012 applications (see note in About This Product section below)
- Kit includes replacement hardware and gaskets, along with special tools required for the job
- Self-locking threads built into the lower busbar which will prevent the connection from backing out and compromising electrical connection
- Patent pending
- The Killer Grid Heater Upgrade Kit is purpose-built to address a major flaw in the 6.7L Cummins engine that can result in total engine destruction. The problem lies in the electrical connection to the intake grid heater. When powering the grid heater, 200 amps pass through a small bolt and nut inside the intake and, over time, is known to deteriorate and eventually arc and break off. This nut drops into the engine, leading to extensive damage to the piston, head, and valves. Several solutions are currently on the market addressing this issue, but they are costly upgrades. They drastically reduce the heat available to the engine and typically require tuning, or they don't work well in cold climates. This kit upgrades that flawed electrical circuit by eliminating the problematic bolts and nuts inside the intake while retaining the stock functionality of the heater, and it is cost-effective and easy to install.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
Showing 1 - 10 of 26 products
Loading...