Image
Product
Price
- Lower Trailing Arms, On-car Adjustable, Rod Ends
- Rear_Lower
- The LTA112's heavy-duty construction eliminates trailing arm flex, giving you much improved repeatability on the street, starting line, or in the corners.
- Product Attributes:
- Control Arm Style: Tubular
- Ball Joint Included: No
- Adjustable: Yes
- Quantity: Sold As A Pair.
- Control Arm Finish: Red Powdercoat
- Bushing Material: Steel Rod End
- Control Arm Material: Steel
- Launching harder, reducing wheel hop, and adding cornering consistency to your 2008-2017 Dodge Challenger is easy with lower trailing arms from BMR Suspension. Stock stamped steel trailing arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMRs rod ended, on-car adjustable trailing arms for Challenger (LTA112) are manufactured from heavy-duty 1-inch DOM steel tubing with TIG-welded Chrome-moly tube adapters. This design gives you a strong trailing arm that eliminates deflection and greatly improves performance. The LTA112 features zinc-plated two-piece, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends. It also features 304 stainless steel, custom designed rod end spacers. This design provides reduced deflection, increased articulation, and an all-around improvement in performanceBMR Suspension designed the LTA112 to work well in street performance, drag race, and road race applications. The stock trailing arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and youre left with poor performance. The LTA112s heavy-duty construction eliminates trailing arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMRs rod ends allows for fine-tuning and bind-free suspension articulation needed for superior handling at any power level. When performance is a must, rely on BMR Suspension!BMR Suspensions LTA112 on-car adjustable lower trailing arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2008 - Dodge Challenger | Mexico | SRT8 |
- Lower Trailing Arms, On-car Adjustable, Rod Ends
- Rear_Lower
- The LTA112's heavy-duty construction eliminates trailing arm flex, giving you much improved repeatability on the street, starting line, or in the corners.
- Product Attributes:
- Control Arm Style: Tubular
- Ball Joint Included: No
- Adjustable: Yes
- Quantity: Sold As A Pair.
- Control Arm Finish: Red Powdercoat
- Bushing Material: Steel Rod End
- Control Arm Material: Steel
- Launching harder, reducing wheel hop, and adding cornering consistency to your 2008-2017 Dodge Challenger is easy with lower trailing arms from BMR Suspension. Stock stamped steel trailing arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMRs rod ended, on-car adjustable trailing arms for Challenger (LTA112) are manufactured from heavy-duty 1-inch DOM steel tubing with TIG-welded Chrome-moly tube adapters. This design gives you a strong trailing arm that eliminates deflection and greatly improves performance. The LTA112 features zinc-plated two-piece, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends. It also features 304 stainless steel, custom designed rod end spacers. This design provides reduced deflection, increased articulation, and an all-around improvement in performanceBMR Suspension designed the LTA112 to work well in street performance, drag race, and road race applications. The stock trailing arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and youre left with poor performance. The LTA112s heavy-duty construction eliminates trailing arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMRs rod ends allows for fine-tuning and bind-free suspension articulation needed for superior handling at any power level. When performance is a must, rely on BMR Suspension!BMR Suspensions LTA112 on-car adjustable lower trailing arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2008 - Dodge Challenger | United States | SRT8 |
- Xtreme Anti-roll Bar Kit, Rear, Hollow 35mm, Delrin Bushings
- Rear
- BMR Suspension designed the XSB011 anti-roll bar for drag race and limited street applications.
- Product Attributes:
- Rear Sway Bar Adjustable: 3-position
- Sway Bar Finish: Red Powdercoated
- Notes: Includes Billet Sway Bar Saddles
- Mounting Hardware Included: Yes
- Quantity: Sold As A Kit
- Rear Sway Bar Type: Hollow
- Rear Sway Bar Diameter (in): 1.375 Inches
- Sway Bar Material: Steel
- Rear Sway Bar Diameter (mm): 35.0 Mm
- Hard launches from high horsepower cars at the drag strip require more than just a normal street-style sway bar. BMR Suspensions Xtreme Anti Roll Bar for 2005-2014 Mustang or 2007-2014 Shelby GT500 allows you to launch harder without excessive body roll limiting traction. Manufactured from heavy-wall 1.375-inch DOM tubing, BMRs Xtreme Anti Roll Bar (XSB011) is designed to eliminate body roll and transfer as much power as possible to the rear wheels. The XSB011 attaches to your Mustang with solid bushings. These bushings are CNC-machined from solid Delrin, and eliminate all bushing deflection. The fabricated laser cut, steel sway bar arms are reinforced to add strength and minimize deflection.BMR Suspension designed the XSB011 sway bar for drag race and limited street applications. The large adjustable sway bar has three positions, giving you the versatility to drive to the track and race at the track with the same sway bar. The XSB011 gives you as much as 4,090% increase (2,430%, 3,080%, and 4,090%) in rate over the stock bar (depending on year and model). These rate increases and adjustability allow you to almost eliminate body roll so you can leave the starting line harder with maximum traction. The hollow design gives you loads of strength without adding a lot of weight. The Delrin sway bar bushings solidly mount the sway bar to the chassis, further reducing deflection. This allows for more body roll control, which equals more traction and consistent launches. When performance is a must, rely on BMR Suspension!BMR Suspensions XSB011 anti roll bar is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!NOTE: Recommended for drag race applications only. Minimal welding necessary.
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2008 - Ford Mustang | United States | Base |
- Xtreme Anti-roll Bar Kit, Rear, Hollow 35mm, Delrin Bushings
- Rear
- BMR Suspension designed the XSB011 anti-roll bar for drag race and limited street applications.
- Product Attributes:
- Rear Sway Bar Adjustable: 3-position
- Sway Bar Finish: Red Powdercoated
- Notes: Includes Billet Sway Bar Saddles
- Mounting Hardware Included: Yes
- Quantity: Sold As A Kit
- Rear Sway Bar Type: Hollow
- Rear Sway Bar Diameter (in): 1.375 Inches
- Sway Bar Material: Steel
- Rear Sway Bar Diameter (mm): 35.0 Mm
- Hard launches from high horsepower cars at the drag strip require more than just a normal street-style sway bar. BMR Suspensions Xtreme Anti Roll Bar for 2005-2014 Mustang or 2007-2014 Shelby GT500 allows you to launch harder without excessive body roll limiting traction. Manufactured from heavy-wall 1.375-inch DOM tubing, BMRs Xtreme Anti Roll Bar (XSB011) is designed to eliminate body roll and transfer as much power as possible to the rear wheels. The XSB011 attaches to your Mustang with solid bushings. These bushings are CNC-machined from solid Delrin, and eliminate all bushing deflection. The fabricated laser cut, steel sway bar arms are reinforced to add strength and minimize deflection.BMR Suspension designed the XSB011 sway bar for drag race and limited street applications. The large adjustable sway bar has three positions, giving you the versatility to drive to the track and race at the track with the same sway bar. The XSB011 gives you as much as 4,090% increase (2,430%, 3,080%, and 4,090%) in rate over the stock bar (depending on year and model). These rate increases and adjustability allow you to almost eliminate body roll so you can leave the starting line harder with maximum traction. The hollow design gives you loads of strength without adding a lot of weight. The Delrin sway bar bushings solidly mount the sway bar to the chassis, further reducing deflection. This allows for more body roll control, which equals more traction and consistent launches. When performance is a must, rely on BMR Suspension!BMR Suspensions XSB011 anti roll bar is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!NOTE: Recommended for drag race applications only. Minimal welding necessary.
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2008 - Ford Mustang | United States | Shelby GT500 |
Showing 1 - 4 of 4 products
Loading...