Image
Product
Price
- Front and Rear Sway Bar Set with Hardware
- Proudly made in the USA, Lifetime warranty, Easy installation, Direct replacement on most applications, Includes and necessary hardware and installation instructions.
-
Features:
- Includes front and rear performance sway bars
- Includes grade 8 hardware and installation instructions
- Improves performance by reducing excessive body roll
- Powdercoated gunmetal finish
- Cold formed solid steel
- One of the most notable but often forgotten improvements you can make to your Sport Truck or SUV is the addition of Belltech Anti-Swaybars. The reduction of the boat-like body roll keeping the body flat in the turns creates a more confident and safe driving experience. Incorporating 30 plus years of design experience, Belltech Anti-Swaybars are designed to improve handling and steering response by minimizing body roll while not affecting ride quality. Belltech Anti-Swaybars are manufactured from cold formed solid or hollow steel and use swedged ends for their superior strength and reliability. All Belltech Anti-Swaybars include high grade mounting hardware, polyurethane bushings and are powder coated gunmetal grey for a durable lasting finish.
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Bed | Region | Engine | Body | Drive Type | Position | Bed Length | Sub Model | CID |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1994 - Ford Mustang | V | - | 2 | N/R | United States | 8 Cyl 5.0L | Coupe | RWD | Front and Rear | N/R | GT | 302 |
- 4" Drop Leaf Spring Shackle & Hanger Kit (Front Hanger/Rear Shackle)
- Lowering Rate: R: 4.0"
- Belltech's stamped steel, fabricated and powdercoated leaf spring hangers and shackles are a bolt in solution to replace your factory leaf spring mounts. requires drilling or grinding out of oem riveted on hangers
-
Features:
- Simply and effectively lower your leaf spring equipped Sport Truck or SUV without modifying or changing the factory leaf spring.
- 4" rear drop
- Retains factory ride quality and load capacity
- Includes: 2x leaf spring hangers, 2x shackles
- Grade 8 hardware and driveline angle corrections (where applicable)
- Belltech Shackle and Hanger Kits are designed to lower the rear of your leaf spring equipped Sport Truck or SUV by up to 5" (Note: Application dependent). Belltech's redesigned Shackle and Hangers reposition the front and/or rear leaf spring mounting points (spring eyes) so you can simply and effectively lower your leaf spring equipped Sport Truck or SUV without modifying or changing the factory leaf spring. This allows you to retain OEM ride quality and more importantly factory load capacity.
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Bed | Region | Engine | Body | Drive Type | Position | Bed Length | Sub Model | CID |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1994 - Chevrolet C1500 | V | - | 2 | Fleetside | United States | 8 Cyl 5.0L | Extended Cab Pickup | RWD | Rear | 78.0 | Base | 305 |
- 6" Drop Flip Kit Inc C-Notch
- Lowering Rate: R: 6.0"
- Belltech flip kits are designed to offer a more aggressive drop for that traditional "slammed" appearance. A lowered center of gravity and no modification to the oem leaf spring aid in retaining the oem ride quality.
-
Features:
- Relocates rear axle from below to the top of leaf spring
- 6-8 in. drop (Note: Application specific)
- Most include: axle saddles, U-bolts, U-bolt plates, shock extentions, C-notch
- Grade 8 hardware
- Installation instructions
- Belltech rear axle Flip Kits are designed application specific to relocate or Flip the rear axle of your truck from beneath the leaf spring to above, providing a dramatic amount of drop. Each Belltech rear axle Flip Kit is engineered for each individual application and manufactured with high quality steel and feature a durable powder coated finish, Grade 8 hardware and installation instructions. Belltech frame rail C-Notches are included in most Flip Kits.
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Bed | Region | Engine | Bed Length | Sub Model | Body | Drive Type | CID |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1994 - Chevrolet C1500 | V | - | 2 | Fleetside | United States | 8 Cyl 6.5L | 78.0 | Base | Standard Cab Pickup | RWD | 395 |
- 6" Drop Flip Kit Inc C-Notch
- Lowering Rate: R: 6.0"
- Belltech flip kits are designed to offer a more aggressive drop for that traditional "slammed" appearance. A lowered center of gravity and no modification to the oem leaf spring aid in retaining the oem ride quality.
-
Features:
- Relocates rear axle from below to the top of leaf spring
- 6-8 in. drop (Note: Application specific)
- Most include: axle saddles, U-bolts, U-bolt plates, shock extentions, C-notch
- Grade 8 hardware
- Installation instructions
- Belltech rear axle Flip Kits are designed application specific to relocate or Flip the rear axle of your truck from beneath the leaf spring to above, providing a dramatic amount of drop. Each Belltech rear axle Flip Kit is engineered for each individual application and manufactured with high quality steel and feature a durable powder coated finish, Grade 8 hardware and installation instructions. Belltech frame rail C-Notches are included in most Flip Kits.
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Bed | Region | Engine | Bed Length | Sub Model | Body | Drive Type | CID |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1994 - Chevrolet C1500 | V | - | 2 | Fleetside | United States | 8 Cyl 5.7L | 78.0 | Cheyenne | Extended Cab Pickup | RWD | 350 |
- 1" Drop Leaf Spring Shackle
- Lowering Rate: R: 1.0"
- Belltech's lowering leaf spring shackles simplify leveling the rear of your truck by replacing the oem shackle using oem hardware.
-
Features:
- Easily lower or level the rear of your truck
- 1" rear drop
- Stamped steel powdercoated body
- Oem Style "silent block" bushing for long, quiet, maintenence free lifespan
- Direct bolt-in with no additional modifications
- Belltech lowering Shackle kits, a simple, economical way to lower the rear of your truck 1, 2, or 3 inches to help give that leveled appearance. Belltech shackles are constructed from powdercoated, heavy gauge die stamped P&O steel featuring OEM quality vulcanized rubber bushings to insure a perfect fit and superior quality for a long, quiet maintenance free life.
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Bed | Region | Engine | Body | Drive Type | Position | Bed Length | Sub Model | CID |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1994 - Chevrolet C1500 | V | - | 2 | Fleetside | United States | 8 Cyl 6.5L | Standard Cab Pickup | RWD | Rear | 78.0 | Base | 395 |
- 2" Drop Spindle Set
- Lowering Rate: F: 2.0"
- The industry standard, Belltech drop spindles can be combined with coilover or air suspension set ups for the ultimate in street performance or frame laying stance. Lifetime warranty, direct bolt in, application specific.
-
Features:
- 2" Drop
- Direct bolt in
- Uses factory ball joints and tie rod ends
- Maintains factory suspension geometry and alignment
- Maintain factory ride quality
- In 1983, Belltech developed one of the industry's first revolutionary products to help jump start the Sport Truck craze, the Drop Spindle. By relocating the spindle pin (Note: Application, while improving handling and retaining factory ride quality. Belltech spindles maintain critical suspension geometry and eliminate excessive ball joint, shock and tire wear common to other methods of lowering. Each spindle is crafted from powdercoated, CNC machined, high strength ductile iron castings providing the structural integrity to meet and exceed all factory specifications & requirements.
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Bed | Region | Engine | Bed Length | Sub Model | Body | Drive Type | CID |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1994 - Chevrolet C1500 Suburban | V | - | 4 | N/R | United States | 8 Cyl 6.5L | N/R | Silverado | Sport Utility | RWD | 395 |
- Universal 3" Rear Lowering Block Kit
- Lowering Rate: R: 3.0"
- Belltech universal extruded aluminum lowering blocks are available in various heights. Includes installation instructions, grade 8 U-bolts and nuts. Fits 2.5" or 3" wide leafs and up to 3" axle tubes.
-
Features:
- 3" drop block kit
- Fits most mini/mid-size trucks with 3" axle tube
- Extrude alluminum construction
- U-bolts and grade 8 hardware included
- Safe/economical solution
- Belltech Lowering Blocks provide an inexpensive, easy to install way to lower your Mini Truck by increasing the distance between the leaf spring and the axle, effectively lowering the vehicle. Belltech lowering block kits are manufactured of high-quality extruded aluminum and come complete with blocks, U-bolts, Nyloc nuts and washers. The extruded aluminum process yields higher strength ratings when compared to cast or steel lowering blocks (or other methods of manufacturing). Lowering blocks are designed to lower the rear of your vehicle in 1,2, 3- or 4-inch increments. Also available with built in 2-degree taper for drive line angle correction.
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Bed | Region | Engine | Body | Drive Type | Position | Bed Length | Sub Model | CID |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1994 - Mitsubishi Mighty Max | V | 2972 | 2 | Fleetside | United States | 6 Cyl 3.0L | Standard Cab Pickup | RWD | Rear | 72.0 | Base | 181 |
- Front And Rear Complete Kit W/ Nitro Drop 2 Shocks
- Lowering Rate: F: 2.0-3.0" / R: 3.0"
- Made up of a variety of combinations of our individual lowering components as well as all the installation and alignment pieces necessary to achieve the listed lowering, choosing your kit has never been simpler.
-
Features:
- Lower your Sport Truck or SUV right the first time. Belltech complete lowering kits include all the parts and pieces you need to achieve not only the look you WANT, but the alignment, and performance & safety you NEED
- Made up of a variety of combinations of our individual lowering components as well as all the installation and alignment pieces necessary to achieve the listed lowering, choosing your kit has never been simpler.
- Kit Includes Nitro Drop 2 shock absorbers
- Lower your Sport Truck or SUV right the first time. Belltech Nitro Drop 2 complete lowering kits include all the parts, pieces and shock absorbers you need to achieve not only the look you WANT, but the ride quality, performance & safety you NEED. Belltech engineers have reviewed the most popular setups for each Sport Truck or SUV in our application range and developed the Belltech Complete Kit Line to simplify your purchase. These complete lowering kits are your all in one box solution. Made up of a variety of combinations of our individual lowering components as well as all the grade 8 installation hardware and alignment pieces necessary to achieve the advertised lowering amount, choosing your kit has never been simpler.
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Bed | Region | Engine | Bed Length | Sub Model | Body | Drive Type | CID |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1994 - Chevrolet S10 | V | - | 2 | Fleetside | United States | 6 Cyl 4.3L | 89.0 | Base | Standard Cab Pickup | RWD | 262 |
- Front And Rear Complete Kit W/ Street Performance Shocks
- Lowering Rate: F: 2.0-3.0" / R: 3.0"
- Made up of a variety of combinations of our individual lowering components as well as all the installation and alignment pieces necessary to achieve the listed lowering, choosing your kit has never been simpler.
-
Features:
- Lower your Sport Truck or SUV right the first time. Belltech complete lowering kits include all the parts and pieces you need to achieve not only the look you WANT, but the alignment, and performance & safety you NEED
- Made up of a variety of combinations of our individual lowering components as well as all the installation and alignment pieces necessary to achieve the listed lowering, choosing your kit has never been simpler.
- Kit Includes Street Performance shock absorbers
- Lower your Sport Truck or SUV right the first time. Belltech Street Performance complete lowering kits include all the parts, pieces and shock absorbers you need to achieve not only the look you WANT, but the ride quality, performance & safety you NEED. Belltech engineers have reviewed the most popular setups for each Sport Truck or SUV in our application range and developed the Belltech Complete Kit Line to simplify your purchase. These complete lowering kits are your all in one box solution. Made up of a variety of combinations of our individual lowering components as well as all the grade 8 installation hardware and alignment pieces necessary to achieve the advertised lowering amount, choosing your kit has never been simpler.
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Bed | Region | Engine | Bed Length | Sub Model | Body | Drive Type | CID |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1994 - GMC Sonoma | V | - | 2 | Fleetside | United States | 6 Cyl 4.3L | 73.1 | SLS | Standard Cab Pickup | RWD | 262 |
- Front And Rear Complete Kit W/ Nitro Drop 2 Shocks
- AN: When lowering the rear of an S10/S15 4"-6" you must check that the yoke is properly positioned in the transmission. The rear transmission seal must be in the original position on the yoke. Lowering Rate: F: 4.0-5.0" / R: 5.0"
- Made up of a variety of combinations of our individual lowering components as well as all the installation and alignment pieces necessary to achieve the listed lowering, choosing your kit has never been simpler.
-
Features:
- Lower your Sport Truck or SUV right the first time. Belltech complete lowering kits include all the parts and pieces you need to achieve not only the look you WANT, but the alignment, and performance & safety you NEED
- Made up of a variety of combinations of our individual lowering components as well as all the installation and alignment pieces necessary to achieve the listed lowering, choosing your kit has never been simpler.
- Kit Includes Nitro Drop 2 shock absorbers
- Lower your Sport Truck or SUV right the first time. Belltech Nitro Drop 2 complete lowering kits include all the parts, pieces and shock absorbers you need to achieve not only the look you WANT, but the ride quality, performance & safety you NEED. Belltech engineers have reviewed the most popular setups for each Sport Truck or SUV in our application range and developed the Belltech Complete Kit Line to simplify your purchase. These complete lowering kits are your all in one box solution. Made up of a variety of combinations of our individual lowering components as well as all the grade 8 installation hardware and alignment pieces necessary to achieve the advertised lowering amount, choosing your kit has never been simpler.
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Bed | Region | Engine | Sub Model | Body | Drive Type | CID |
|---|---|---|---|---|---|---|---|---|---|---|
| 1994 - GMC Sonoma | V | - | 2 | Fleetside | United States | 6 Cyl 4.3L | SLS | Standard Cab Pickup | RWD | 262 |
Showing 1 - 10 of 246 products
Loading...