2003 Dodge Bilstein Parts
Choose a Model for your 2003 Dodge
Image
Product
Price
- B8 5160 - Suspension Shock Absorber
- Fits Vehicles With 0-3" Front Lift
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 660.2
- Reservoir: Yes
- Segment: Light Truck
- Billet Reservoir Clamp Included: No
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 386.0
- Boot Included: No
- Lower Mount Type: Eye 14.4mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Remote reservoir increases shock oil capacity for greater heat dissipation
- Self-adjusting deflective disc valving reacts immediately to surface changes enabling maximum vehicle control
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
216521R, 25-187595, 985-24-026, BR5-G694, F4-BR5-G694-H0
Additional Fitment Information:
| Vehicle | Position | Sub Model | Body | Drive Type |
|---|---|---|---|---|
| 2003 - Dodge Ram 3500 | Front | ST | Cab & Chassis | 4WD |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 3-5" Rear Lift
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Eye 14.1mm
- Extended Length (MM): 811.0
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 517.5
- Boot Included: No
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
217774, 33187228, 985-24-024, BE5-F256, F4-BE5-F256-H1, RS77056
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2003 - Dodge Ram 3500 | Rear | ST | 4WD |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 0-2.5" Front Lift
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 619.0
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 378.0
- Boot Included: Black Bellows
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24185776, 963405, 985-24-061, BE5-6681, F4-BE5-6681-H7, F4-BE5-6681-H8, RS77043
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2003 - Dodge Ram 3500 | Front | Laramie | 4WD |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 0-1" Rear Lift
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Eye 14.4mm
- Extended Length (MM): 664.0
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 410.5
- Boot Included: Black Bellows
- Lower Mount Type: Eye 14.4mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
217805, 24185783, 980-24-660, BE5-6682, F4-BE5-6682-H6, F4-BE5-6682-H7, F4-BE5-6682-H8, RS77274
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2003 - Dodge Ram 1500 | Rear | SLT | 4WD |
- B1 (Components) - Suspension Shock Absorber Reservoir Mount
- Optional Billet Reservoir Clamp Mount for 5160-series shocks only
- Reservoir Bracket Assembly
- B1 (Components)
- Product Attributes:
- Segment: Miscellaneous
- PartType: Components
- Prop 65 (Y/N): Y
-
Features:
- Original Bilstein service parts are built to high OE quality standards
- Manufactured to perfectly fit with Bilstein shock absorbers
- Broad ranges of support bearings for virtually any type of car
- Bilstein B1 (Components) Shock Absorber Reservoir Mounts are engineered to work in conjunction with Bilstein B8 5160 and B8 5165 shock absorbers. These billet aluminum mounts secure the reservoir to the shock absorber body ensuring it stays positioned perfectly, even during off-road use. The clamp divides into two separate pieces to make installation extremely easy, and is connected by two heavy duty stainless steel bolts. Finished in black anodized coating to protect against harsh off-road elements, these reservoir mounts will provide safety and convenience in an attractive package.
This Part Fits the Following OEM/Substitute Numbers:
11176015, A00-H601, F4-A00-H601-H0
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2003 - Dodge Ram 2500 | SLT | 4WD |
- Cantilever to Eye Mounting Type Use Bilstein # 33-170794 for eye to eye mount steering damper installed under factory recall
- 46mm Monotube Steering Damper
- B8 5100 (Steering Damper)
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Cantilever
- Extended Length (MM): 598.0
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- PartType: Steering Stabilizer
- Collapsed Length (MM): 384.0
- Boot Included: Black Bellows
- Lower Mount Type: Eye 12.7mm
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Allows the ability to dampen minute movements in the steering
- Reduces steering vibrations
- Maintains complete command of your truck, van or SUV at all times
- Bilstein B8 5100 (Steering Damper) is designed as an upgrade to factory steering dampers on trucks and SUVs. Utilizing our proven design, these steering dampers are able to dampen minute movements in the steering and reduce steering vibrations that naturally occur, especially in older vehicles. These steering dampers are zinc coated for resistance to harsh elements and match to all B8 5100 series products. B8 5100 (Steering Damper) will offer a significant improvement in steering, handling and comfort.
This Part Fits the Following OEM/Substitute Numbers:
24164870, 385504, BE5-G487, F4-BE5-G487-H0
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2003 - Dodge Ram 3500 | Front | Laramie | 4WD |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 4-5" Front Lift
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 694.0
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 415.0
- Boot Included: Black Bellows
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
217853, 24-185769, 24066464, 985-24-024, BE5-6646, F4-BE5-6646-H7
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2003 - Dodge Ram 2500 | Front | SLT | 4WD |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 2" Rear Lift
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Eye 14.1mm
- Extended Length (MM): 760.0
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 461.5
- Boot Included: Black Bellows
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24186636, 862727, BE5-B514, F4-BE5-B514-H0, RS77056
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2003 - Dodge Ram 2500 | Rear | Laramie | 4WD |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 0-1" Rear Lift
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Eye 14.4mm
- Extended Length (MM): 695.0
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 430.5
- Boot Included: Black Bellows
- Lower Mount Type: Eye 14.4mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24191203, 930560, BE5-6647, F4-BE5-6647-H1, RS77269
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2003 - Dodge Ram 3500 | Rear | Laramie | 4WD |
- B4 OE Replacement - Suspension Strut Assembly
- Super High Ceiling Model
- Twintube Strut Assembly
- B4 OE Replacement
- Product Attributes:
- Boot Included: No
- Internal Design: Twintube
- Lower Mount Type: Bracket
- Upper Mount Type: Stem
- Segment: Spare Parts
- Spring Seat Included: No
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- High OE quality
- High power reserves for maximum safety
- Restores original driving comfort, handling and safety
- Bilstein B4 OE Replacement dampers are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
115 901, 115 904, 22-123404, 22214768, 2D0 413 029 A, 36-A29-B, 904 320 07 30, 904 320 08 30, 904 320 13 30, 904 320 14 30, 904 320 16 30, 904 320 18 30, 904 320 19 30, 904 320 19 30 64, 904 320 26 30
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2003 - Dodge Sprinter 3500 | Front | Base |
Showing 1 - 10 of 20 products
Loading...