2015 Jeep Bilstein Parts
Choose a Model for your 2015 Jeep
Image
Product
Price
- B8 8100 (Bypass) - Suspension Shock Absorber
- Fits Vehicles With 3.5-5" Front Lift
- 60mm Shock Absorber
- B8 8100 (Bypass)
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 686.6
- Reservoir: Yes
- Segment: Light Truck
- Body Design: Bypass Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 437.0
- Boot Included: No
- Lower Mount Type: Eye 12.1mm
- Adjustable Damping: Double Adjustable Compression And Rebound With Click Adjuster Knobs
- Body Diameter (ID): 60mm
- Prop 65 (Y/N): Y
-
Features:
- Dual tube external bypass offers position sensitive damping with independent adjustment for rebound and compression
- 60mm large bore hard anodized aluminum piston offers a greater range of damping control and delivers exceptional long-term durability
- Incremental flow adjuster offers finite and incremental changes in damping force for precise adjustments
- Bilstein B8 8100 (Bypass) is a direct fit, position sensitive, damper for light trucks and SUV’s. These motorsports inspired shock absorbers utilize a dual tube externally adjustable bypass design. B8 8100 (Bypass) feature “Incremental Flow” bypass adjusters, allowing for finite and incremental changes for rebound and compression. The shocks utilize a bottom hose, remote reservoir exit port, delivering increased compression control during the full cycle. The remote reservoir is supplied with a bolt-on aluminum anodized chassis mount for an easy fitment. BILSTEIN B8 8100 (Bypass) will maximize the driver experience, offering unparalleled ride comfort and incredible bottom out control.
This Part Fits the Following OEM/Substitute Numbers:
BP5160022
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2015 - Jeep Wrangler | Front Right | Rubicon |
- B8 8100 (Bypass) - Suspension Shock Absorber
- Fits Vehicles With 3.5-5" Rear Lift
- 60mm Shock Absorber
- B8 8100 (Bypass)
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Bar Pin
- Extended Length (MM): 707.0
- Reservoir: Yes
- Segment: Light Truck
- Body Design: Bypass Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 436.0
- Boot Included: No
- Lower Mount Type: Eye 12.1mm
- Adjustable Damping: Double Adjustable Compression And Rebound With Click Adjuster Knobs
- Body Diameter (ID): 60mm
- Prop 65 (Y/N): Y
-
Features:
- Dual tube external bypass offers position sensitive damping with independent adjustment for rebound and compression
- 60mm large bore hard anodized aluminum piston offers a greater range of damping control and delivers exceptional long-term durability
- Incremental flow adjuster offers finite and incremental changes in damping force for precise adjustments
- Bilstein B8 8100 (Bypass) is a direct fit, position sensitive, damper for light trucks and SUV’s. These motorsports inspired shock absorbers utilize a dual tube externally adjustable bypass design. B8 8100 (Bypass) feature “Incremental Flow” bypass adjusters, allowing for finite and incremental changes for rebound and compression. The shocks utilize a bottom hose, remote reservoir exit port, delivering increased compression control during the full cycle. The remote reservoir is supplied with a bolt-on aluminum anodized chassis mount for an easy fitment. BILSTEIN B8 8100 (Bypass) will maximize the driver experience, offering unparalleled ride comfort and incredible bottom out control.
This Part Fits the Following OEM/Substitute Numbers:
BP5160030
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2015 - Jeep Wrangler | Rear Right | Unlimited Sahara |
- B8 8100 (Bypass) - Suspension Shock Absorber
- Fits Vehicles With 3.5-5" Rear Lift
- 60mm Shock Absorber
- B8 8100 (Bypass)
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Bar Pin
- Extended Length (MM): 707.0
- Reservoir: Yes
- Segment: Light Truck
- Body Design: Bypass Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 436.0
- Boot Included: No
- Lower Mount Type: Eye 12.1mm
- Adjustable Damping: Double Adjustable Compression And Rebound With Click Adjuster Knobs
- Body Diameter (ID): 60mm
- Prop 65 (Y/N): Y
-
Features:
- Dual tube external bypass offers position sensitive damping with independent adjustment for rebound and compression
- 60mm large bore hard anodized aluminum piston offers a greater range of damping control and delivers exceptional long-term durability
- Incremental flow adjuster offers finite and incremental changes in damping force for precise adjustments
- Bilstein B8 8100 (Bypass) is a direct fit, position sensitive, damper for light trucks and SUV’s. These motorsports inspired shock absorbers utilize a dual tube externally adjustable bypass design. B8 8100 (Bypass) feature “Incremental Flow” bypass adjusters, allowing for finite and incremental changes for rebound and compression. The shocks utilize a bottom hose, remote reservoir exit port, delivering increased compression control during the full cycle. The remote reservoir is supplied with a bolt-on aluminum anodized chassis mount for an easy fitment. BILSTEIN B8 8100 (Bypass) will maximize the driver experience, offering unparalleled ride comfort and incredible bottom out control.
This Part Fits the Following OEM/Substitute Numbers:
BP5160030
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2015 - Jeep Wrangler | Rear Left | Rubicon |
- B8 8100 (Bypass) - Suspension Shock Absorber
- Fits Vehicles With 3.5-5" Front Lift
- 60mm Shock Absorber
- B8 8100 (Bypass)
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 686.6
- Reservoir: Yes
- Segment: Light Truck
- Body Design: Bypass Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 437.0
- Boot Included: No
- Lower Mount Type: Eye 12.1mm
- Adjustable Damping: Double Adjustable Compression And Rebound With Click Adjuster Knobs
- Body Diameter (ID): 60mm
- Prop 65 (Y/N): Y
-
Features:
- Dual tube external bypass offers position sensitive damping with independent adjustment for rebound and compression
- 60mm large bore hard anodized aluminum piston offers a greater range of damping control and delivers exceptional long-term durability
- Incremental flow adjuster offers finite and incremental changes in damping force for precise adjustments
- Bilstein B8 8100 (Bypass) is a direct fit, position sensitive, damper for light trucks and SUV’s. These motorsports inspired shock absorbers utilize a dual tube externally adjustable bypass design. B8 8100 (Bypass) feature “Incremental Flow” bypass adjusters, allowing for finite and incremental changes for rebound and compression. The shocks utilize a bottom hose, remote reservoir exit port, delivering increased compression control during the full cycle. The remote reservoir is supplied with a bolt-on aluminum anodized chassis mount for an easy fitment. BILSTEIN B8 8100 (Bypass) will maximize the driver experience, offering unparalleled ride comfort and incredible bottom out control.
This Part Fits the Following OEM/Substitute Numbers:
BP5160022
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2015 - Jeep Wrangler | Front Left | Sport |
- B8 TerraSport - Suspension Strut Assembly
- Provides 1" Rear Lift
- Twintube Strut Assembly
- B8 TerraSport
- Product Attributes:
- Boot Included: No
- Internal Design: Twintube
- Lower Mount Type: Bracket
- Upper Mount Type: Stem
- Reservoir: No
- Segment: Tuning
- Adjustable Damping: Non-adjustable
- Spring Seat Included: Yes - Fixed
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- No spacers required. Shocks lift vehicle 1-2 inches, depending on application
- Utilizes vehicle‘s factory coil springs and OEM mounting locations, for a direct fit, easy installation
- Direct fit shocks are designed to increase ground clearance and improve off-road capabilities
- Bilstein B8 TerraSport direct fit shocks are designed to increase ground clearance and improve off-road capability for CUVs. Enthusiasts will gain 1-2” of lift depending on application, allowing them to safely navigate back-country terrain, while enhancing day-to-day ride quality. Like all Bilstein products, B8 TerraSport shocks have been tested and tuned for each application, and always with the end user in mind. Whether you’re traversing your way up a snow packed summit, or loaded up with gear and looking for that epic camping spot, B8 TerraSport gives you the confidence to push further when the pavement ends, and the durability to get you back home.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2015 - Jeep Renegade | Rear Right | Latitude | AWD |
- B1 (Components) - Suspension Shock Absorber Reservoir Mount
- Optional Billet Reservoir Clamp Mount for 5160-series shocks only
- Reservoir Bracket Assembly
- B1 (Components)
- Product Attributes:
- Segment: Miscellaneous
- PartType: Components
- Prop 65 (Y/N): Y
-
Features:
- Original Bilstein service parts are built to high OE quality standards
- Manufactured to perfectly fit with Bilstein shock absorbers
- Broad ranges of support bearings for virtually any type of car
- Bilstein B1 (Components) Shock Absorber Reservoir Mounts are engineered to work in conjunction with Bilstein B8 5160 and B8 5165 shock absorbers. These billet aluminum mounts secure the reservoir to the shock absorber body ensuring it stays positioned perfectly, even during off-road use. The clamp divides into two separate pieces to make installation extremely easy, and is connected by two heavy duty stainless steel bolts. Finished in black anodized coating to protect against harsh off-road elements, these reservoir mounts will provide safety and convenience in an attractive package.
This Part Fits the Following OEM/Substitute Numbers:
11176015, A00-H601, F4-A00-H601-H0
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2015 - Jeep Wrangler | Unlimited Rubicon |
- B6 - Suspension Strut Assembly
- Twintube Strut Assembly
- B6
- Product Attributes:
- Boot Included: No
- Internal Design: Twintube
- Lower Mount Type: Base Cup
- Upper Mount Type: Stem
- Reservoir: No
- Segment: Tuning
- Adjustable Damping: Non-adjustable
- Spring Seat Included: Yes - Fixed
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- Uses OEM springs and mounting hardware
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Specific tuning for stock height vehicles
- Bilstein B6 shock absorbers and struts are the ideal choice for improving the performance of any vehicle. Bilstein B6 shock absorbers and struts utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions to provide consistent fade free performance. All B6 shock absorbers and struts are tuned for each specific application to assure optimal performance is achieved. Bilstein B6 shock absorbers and struts offer a significant improvement in ride quality, handling, and comfort.
This Part Fits the Following OEM/Substitute Numbers:
5274 530AE, 5274 530AF, 5274 532AE, 5274 532AF, 5274530AE, 5274530AF, 5274532AE, 5274532AF, 6838 1242AC, 6838 1242AD
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2015 - Jeep Cherokee | Front Right | Trailhawk |
- B4 OE Replacement - Suspension Strut Assembly
- With Jeep Active Drive II (4WD) With Off-Road Suspension
- Twintube Strut Assembly
- B4 OE Replacement
- Product Attributes:
- Boot Included: No
- Internal Design: Twintube
- Lower Mount Type: Base Cup
- Upper Mount Type: Stem
- Segment: Spare Parts
- Spring Seat Included: Yes - Fixed
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- High OE quality
- High power reserves for maximum safety
- Restores original driving comfort, handling and safety
- Bilstein B4 OE Replacement dampers are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
This Part Fits the Following OEM/Substitute Numbers:
5274 530AE, 5274 530AF, 5274 532AE, 5274 532AF, 5274530AE, 5274530AF, 5274532AE, 5274532AF
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2015 - Jeep Cherokee | Front Right | Latitude | AWD |
- B8 TerraSport - Suspension Strut Assembly
- Provides 1" Rear Lift
- Twintube Strut Assembly
- B8 TerraSport
- Product Attributes:
- Boot Included: No
- Internal Design: Twintube
- Lower Mount Type: Bracket
- Upper Mount Type: Stem
- Reservoir: No
- Segment: Tuning
- Adjustable Damping: Non-adjustable
- Spring Seat Included: Yes - Fixed
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- No spacers required. Shocks lift vehicle 1-2 inches, depending on application
- Utilizes vehicle‘s factory coil springs and OEM mounting locations, for a direct fit, easy installation
- Direct fit shocks are designed to increase ground clearance and improve off-road capabilities
- Bilstein B8 TerraSport direct fit shocks are designed to increase ground clearance and improve off-road capability for CUVs. Enthusiasts will gain 1-2” of lift depending on application, allowing them to safely navigate back-country terrain, while enhancing day-to-day ride quality. Like all Bilstein products, B8 TerraSport shocks have been tested and tuned for each application, and always with the end user in mind. Whether you’re traversing your way up a snow packed summit, or loaded up with gear and looking for that epic camping spot, B8 TerraSport gives you the confidence to push further when the pavement ends, and the durability to get you back home.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2015 - Jeep Renegade | Rear Left | Limited | AWD |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 1.5-3" Front Lift
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 625.5
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 380.6
- Boot Included: Black Bellows
- Lower Mount Type: Eye 12.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
217753, 24146708, 980-24-887, BE5-E670, F4-BE5-E670-H0, RS77326
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2015 - Jeep Wrangler | Front | Unlimited Sahara |
Showing 1 - 10 of 34 products
Loading...