2020 Ford Bilstein Parts
Choose a Model for your 2020 Ford
Image
Product
Price
- B8 5160 - Suspension Shock Absorber
- Fits Vehicles With 4-6" Front Lift
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 654.0
- Reservoir: Yes
- Segment: Light Truck
- Billet Reservoir Clamp Included: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 405.4
- Boot Included: No
- Lower Mount Type: Eye 14.4mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Remote reservoir increases shock oil capacity for greater heat dissipation
- Self-adjusting deflective disc valving reacts immediately to surface changes enabling maximum vehicle control
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
25-177435, 25-285321, 66513R, 985-24-133, BR5-H743, F4-BR5-H743-H0
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2020 - Ford F-350 Super Duty | Front | XL | 4WD |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 0-1" Rear Lift
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Eye 12mm
- Extended Length (MM): 709.5
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 431.0
- Boot Included: Black Bellows
- Lower Mount Type: Eye 12mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
RS77149
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2020 - Ford F-150 | Rear | Platinum | RWD |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 1.5-3" Rear Lift
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Eye 16mm
- Extended Length (MM): 802.7
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 510.0
- Boot Included: Black Bellows
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
985-24-152
Additional Fitment Information:
| Vehicle | Position | Sub Model | Body | Drive Type |
|---|---|---|---|---|
| 2020 - Ford F-350 Super Duty | Rear | XLT | Crew Cab Pickup | 4WD |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 0-1" Rear Lift
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Eye 12mm
- Extended Length (MM): 730.0
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 445.0
- Boot Included: Black Bellows
- Lower Mount Type: Eye 12mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
985-24-029, RS77316
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2020 - Ford F-150 | Rear | Limited | 4WD |
- B8 6112 - Suspension Kit
- Provides 0-2" Front Lift
- Front Suspension Kit
- B8 6112
- Product Attributes:
- Boot Included: No
- Internal Design: Monotube
- Reservoir: No
- Segment: Light Truck
- Body Design: Snap Ring Grooved Body (coilover)
- Body Diameter (ID): 60mm
- Spring Seat Included: Yes
- PartType: Suspension Kit
- Prop 65 (Y/N): Y
-
Features:
- 60mm digressive piston improves ride comfort and control over rough terrain
- Vehicle specific tuning
- Large 60mm body for increased oil capacity, cooling, and long-term durability
- Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
This Part Fits the Following OEM/Substitute Numbers:
47-256958, 91711
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2020 - Ford F-150 | Front | Lariat | 4WD |
- B8 6112 - Suspension Kit
- Provides 0-1.5" Front Lift
- Front Suspension Kit
- B8 6112
- Product Attributes:
- Boot Included: No
- Internal Design: Monotube
- Reservoir: No
- Segment: Light Truck
- Body Design: Snap Ring Grooved Body (coilover)
- Body Diameter (ID): 60mm
- Spring Seat Included: Yes
- PartType: Suspension Kit
- Prop 65 (Y/N): Y
-
Features:
- 60mm digressive piston improves ride comfort and control over rough terrain
- Vehicle specific tuning
- Large 60mm body for increased oil capacity, cooling, and long-term durability
- Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2020 - Ford F-150 | Front | Lariat | 4WD |
- B6 - Suspension Shock Absorber
- 46mm Monotube Shock Absorber
- B6
- Product Attributes:
- Boot Included: Blue Straight
- Internal Design: Monotube
- Lower Mount Type: Eye 19.1mm
- Upper Mount Type: Eye 19.1mm
- Segment: Heavy Duty
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
-
Features:
- Uses OEM springs and mounting hardware
- Specific tuning for stock height vehicles
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B6 shock absorbers and struts are the ideal choice for improving the performance of any vehicle. These shock absorbers and struts feature a monotube design which provides consistent fade free performance. Bilstein B6 shock absorbers and struts utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions to provide consistent fade free performance. All B6 shock absorbers and struts are tuned for each specific application to assure optimal performance is achieved. Bilstein B6 shock absorbers and struts offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24-187039, 24234511
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2020 - Ford F-53 Motorhome Chassis | Front | Base |
- B6 4600 - Suspension Shock Absorber
- 46mm Monotube Shock Absorber
- B6 4600
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Eye 12mm
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Boot Included: Blue Bellows
- Lower Mount Type: Eye 12mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Uses OEM springs and mounting hardware
- Specific tuning for stock height vehicles
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
985-24-029, FL3Z 18125-D, FL3Z 18125-E, FL3Z 18125-F, FL3Z 18125-L, GL3Z 18125-F, ML3Z 18125-AA, ML3Z 18125-AM, ML3Z 18125-AN, ML3Z 18125-AQ, ML3Z 18125-AR, ML3Z 18125-AT, ML3Z 18125-AV, ML3Z 18125-BF, ZX2119
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2020 - Ford F-150 | Rear | XL | 4WD |
- B6 4600 - Suspension Shock Absorber
- Without Tremor Off-Road Package
- 46mm Monotube Shock Absorber
- B6 4600
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Boot Included: Blue Straight
- Lower Mount Type: Eye 14.4mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Uses OEM springs and mounting hardware
- Specific tuning for stock height vehicles
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
HC3Z 18124-AC, HC3Z 18124-H, HC3Z 18124-J, HC3Z 18124-K, HC3Z 18124-L, HC3Z 18124-M, HC3Z 18124-N, HC3Z 18124-P, HC3Z 18124-Q, HC3Z 18124-R, HC3Z 18124-S, HC3Z 18124-T, HC3Z 18124-U, HC3Z 18124-V, HC3Z 18124-W, LC3Z 18124-A, LC3Z 18124-B, LC3Z 18124-C...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model | Body | Drive Type |
|---|---|---|---|---|
| 2020 - Ford F-250 Super Duty | Front | XL | Crew Cab Pickup | 4WD |
- B1 (Components) - Suspension Shock Absorber Reservoir Mount
- Optional Billet Reservoir Clamp Mount for 5160-series shocks only
- Reservoir Bracket Assembly
- B1 (Components)
- Product Attributes:
- Segment: Miscellaneous
- PartType: Components
- Prop 65 (Y/N): Y
-
Features:
- Original Bilstein service parts are built to high OE quality standards
- Manufactured to perfectly fit with Bilstein shock absorbers
- Broad ranges of support bearings for virtually any type of car
- Bilstein B1 (Components) Shock Absorber Reservoir Mounts are engineered to work in conjunction with Bilstein B8 5160 and B8 5165 shock absorbers. These billet aluminum mounts secure the reservoir to the shock absorber body ensuring it stays positioned perfectly, even during off-road use. The clamp divides into two separate pieces to make installation extremely easy, and is connected by two heavy duty stainless steel bolts. Finished in black anodized coating to protect against harsh off-road elements, these reservoir mounts will provide safety and convenience in an attractive package.
This Part Fits the Following OEM/Substitute Numbers:
11176015, A00-H601, F4-A00-H601-H0
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2020 - Ford F-150 | King Ranch | RWD |
Showing 1 - 10 of 32 products
Loading...