Image
Product
Price
- Powered Converter Wiring Kit (10 Amps)
- Powered Converter; 20 Ft. Length; For Use w/Battery Powered Taillight Converters; Requires PN[56146]
- CURT 55151 Powered Converter Wiring Kit for Tail Light Converter; 10 Amps
- Wiring Kit
- Product Attributes:
- Connector Style: 4 Flat
- WARNING CA Proposition 65: Yes
- Connector Type: Vehicle Side
-
Features:
- Routes Power From Vehicle Battery To Powered Converter
- Designed For Use w/Battery-Powered Electrical Converters
- 20 ft. Of 12 Gauge Cross-Linked Wire For Flexible Installation
- Made In USA
- When your vehicle does not readily provide an electrical connection for hooking up your trailer, CURT electrical converts offer the solution. Working tail lights on your trailer are absolutely essential any time you tow, and a converter provides an effective way to properly equip your vehicle for safe towing. A CURT electrical converter, much like our custom vehicle-to-trailer wiring harnesses, provides a trailer connector on your vehicle by slicing into the vehicles electrical system. Electrical converters are designed to splice directly into the taillight wiring, rather than plugging into various sockets, giving them the nickname 'taillight converters'. Though it requires a little extra work compared to a custom wiring harness, a tail light converter offers a reliable, long-term connector solution. This converter wiring kit is intended to be used with various CURT powered taillight converters. Powered converters require a direct connection to the vehicles battery, and the powered converter wiring kit #55151 provides all of the components needed to establish a secure connection. The kit includes 20 feet of 12 gauge wire, a 10-amp fuse, an in-line fuse holder, a 3/8 in. ring terminal, a butt connector, a 14-1/2 in. cable tie and eight 6 in. cable ties. This wiring kit is rated at 10 amps and comes included with CURT powered electrical converters #59146, #59187, #59190, #59200 and #59201.
Additional Fitment Information:
| Vehicle |
|---|
| 1989 - Jaguar XJ12 |
- Powered 3-to-2-Wire Taillight Converters (30-Pack)
- Protected; Powered; 4 Way Output; Tail Light Circuit 6.0 ; Turn And Brake Circuit 3.0; Req. PN[55151] Converter Or Similar; Bulk 30 Pack
- CURT 56146030 Powered 3-to-2-Wire Splice-in Trailer Tail Light Converter; 4-Pin Wiring Harnesses; 30-Pack
- Powered 3-To-2-Wire Taillight Converter
- Product Attributes:
- Output Type: 4-way Flat
- WARNING CA Proposition 65: Yes
- Turn and Brake Circuits: 3.0 Amp
- Tail Light Circuits: 6.0 Amp
-
Features:
- Converts 3-Wire Vehicle System To Standard 2-Wire Trailer Wiring
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Constructed w/Smt Circuitry For Better Performance/Durability
- Color-Coded Wires For Easier Installation
- Snap Locks Included For Fast Secure Splicing
- No Heavy-Duty Flasher Required
- Dust Cover Included To Keep Connector Clean When Not In Use
- Made In USA
- When your vehicle does not readily provide an electrical connection for hooking up your trailer, CURT electrical converts offer the solution. Working tail lights on your trailer are absolutely essential any time you tow, and a converter provides an effective way to properly equip your vehicle for safe towing. A CURT electrical converter, much like our custom vehicle-to-trailer wiring harnesses, provides a trailer connector on your vehicle by slicing into the vehicles electrical system. Electrical converters are designed to splice directly into the taillight wiring, rather than plugging into various sockets, giving them the nickname "taillight converters". Though it requires a little extra work compared to a custom wiring harness, a tail light converter offers a reliable, long-term connector solution.This package contains 30 converters. These CURT electrical converters are designed to convert a 3-wire system to a 2-wire system and provide a standard 4-way flat connector socket to plug in your trailer. They are made with cutting-edge surface-mount technology (SMT) circuitry, featuring electrical components that are mounted directly to the surface of the board rather than being inserted into a series of holes. SMT circuits have longer life cycles, lower resistance, reduced heat generation and are more reliable than through-hole-mounted components.
Additional Fitment Information:
| Vehicle |
|---|
| 1989 - Jaguar XJ12 |
- Class 1 Trailer Hitch; 1-1/4in. Ball Mount; Select Jaguar XJ6; XJ12; XJS
- Includes Std Ball Mount/Pin/Clip; 2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Flat Main Body~Drilling Required~Visibility: Concealed~Fascia Trimming Required~Install Time 30 Minutes
- CURT 117333 Class 1 Trailer Hitch with Ball Mount; 1-1/4-In Receiver; Fits Select Jaguar XJ6; XJ12; XJS
- Class I 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 2000
- Body Shape: Flat
- WARNING CA Proposition 65: No
- Drilling Required: Yes
- Install Time: 30 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- 1 1/4 In. X 1 1/4 In. Ball Mount Features A 3/4 In. Hole
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Jaguar XJ6, XJ12 and XJS (see application info to verify fitment). The hitch integrates with the vehicles frame and provides a useful and dependable 1-1/4 in. x 1-1/4 in. receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4 in. trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid Bonderite for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where youre headed or which season of the year you're towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1989 - Jaguar XJS | V | 5343 | Rear | 12 Cyl 5.3L | - |
Showing 1 - 3 of 3 products
Loading...