2015 Subaru CURT Parts

Choose a Model for your 2015 Subaru


Showing 1 - 10 of 25 products
Image
SKU
Product
Rating
Price

CURT
  • Class 3 Hitch; 2in. Receiver; Select Subaru Legacy; Outback (Exposed Main Body)
  • 4000lbs. Gross Trailer Weight; 600lbs. Tongue Weight Round Main Body~Drilling Required~Visibility: Exposed~Install Time 45 Minutes
  • CURT 13390 Class 3 Trailer Hitch; 2-Inch Receiver; Exposed Main Body; Fits Select Subaru Legacy; Outback
  • Class III 2 in. Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 4000 Lbs.
    • Visibility: Exposed
    • Weight Carrying Capacity: 4000
    • Body Shape: Round
    • WARNING CA Proposition 65: No
    • Drilling Required: Yes
    • Install Time: 45 Minutes
    • WC Tongue Weight: 600
    • Receiver Tube Size: 2.000 In.
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Constructed w/A Sleek Round-Tube Main Body
    • Protected By A Durable High-Gloss Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Strengthened w/A Cast Welded Seamless Collar
    • Equipped w/An Open-Back Receiver For Easy Cleaning
    • Made in USA [may include imported hardware]
  • Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Subaru Legacy and Outback (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 600 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2015 - Subaru Legacy H 2498 Rear 4 Cyl 2.5L 152

CURT
  • Custom 4-Flat; Select Subaru Vehicles; OEM Tow Package Required
  • Circuit Protected And Powered; 3-Wire System; 4-Way Flat; Tail Light Circuit 6.0 Amps; Turn And Brake Circuit 3.0 Amps Install Time 10 Minutes
  • CURT 56040 Vehicle-Side Custom 4-Pin Trailer Wiring Harness; Fits Select Subaru Ascent; Forester; Outback; Crosstrek; XV
  • Custom Wiring Connector
  • Product Attributes:
    • Output Type: 4-way Flat
    • Electrical System Type: 3w
    • Converter Type: Circuit Protected Powered
    • WARNING CA Proposition 65: Yes
    • Install Time: 10 Minutes
    • Turn and Brake Circuits: 3.0 Amp
    • Tail Light Circuits: 6.0 Amp
  • Features:
    • Plugs Into Existing Vehicle Socket To Provide 4-Way Flat Socket
    • Simple Plug-And-Play Design Eliminates The Need For Splicing
    • 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
    • Equipped w/A Powered 3-Wire To 2-Wire Tail Light Converter
    • Constructed w/Smt Circuitry For Better Performance And Durability
    • Dust Cover Included To Keep Connector Clean When Not In Use
    • Backed By A Limited One-Year Warranty
    • Made In USA
  • CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Although this special socket is not equipped on every vehicle, a CURT custom wiring connector -- also called a T-connector -- utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicles wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard, universal vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular plug-in connector provides a 4-way flat socket and is designed to be a custom wiring option for certain years of the Subaru Ascent, Forester, Outback, Crosstrek and XV Crosstrek (factory tow package required; to verify your vehicle compatibility, see application info). It comes with all necessary hardware to establish a solid connection. It also comes with a dust cover to keep the connector socket clean when not in use. To ensure long-lasting reliability, all CURT custom wiring connectors are thoroughly tested for optimal functionality. Stress is the last thing you should feel when towing a trailer -- whether youre hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it.

Additional Fitment Information:
Vehicle Sub Model
2015 - Subaru XV Crosstrek Base

CURT
  • Class 1 Trailer Hitch; 1-1/4in. Receiver; Select Subaru Impreza; WRX; STI
  • 2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 35 Minutes~Under Car Trimming Required
  • CURT 11408 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Subaru Impreza; WRX; STI
  • Class I 1.25 in. Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 2000 Lbs.
    • Visibility: Exposed
    • Weight Carrying Capacity: 2000
    • Body Shape: Square
    • WARNING CA Proposition 65: No
    • Drilling Required: No
    • Install Time: 35 Minutes
    • WC Tongue Weight: 200
    • Receiver Tube Size: 1.250 In.
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Protected By A Durable High-Gloss Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Strengthened w/A Cast Welded Seamless Collar
    • Equipped w/An Open-Back Receiver For Easy Cleaning
    • Backed By A Limited Lifetime Warranty
    • Made in USA [may include imported hardware]
  • However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Subaru Impreza, WRX and WRX STI (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model Body CID
2015 - Subaru Impreza H 1995 Rear 4 Cyl 2.0L Base Sedan -

CURT
  • Class 3 Hitch; 2in. Receiver; Select Subaru Outback (Exposed Main Body; Drilling
  • 4000lbs. Gross Trailer Weight; 600lbs. Tongue Weight; Drilling Required Round Main Body~Drilling Required~Visibility: Exposed~Install Time 45 Minutes~Heat Shield Trimming Required~Hole Enlargement Required~Temporarily Lower Exhaust For Installation~Temporarily Remove Heat Shield For Installation
  • CURT 13206 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Exposed Main Body; Drilling; Subaru Outback
  • Class III 2 in. Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 4000 Lbs.
    • Visibility: Exposed
    • Weight Carrying Capacity: 4000
    • Body Shape: Round
    • WARNING CA Proposition 65: No
    • Drilling Required: Yes
    • Install Time: 45 Minutes
    • WC Tongue Weight: 600
    • Receiver Tube Size: 2.000 In.
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Constructed w/A Sleek Round-Tube Main Body
    • Protected By A Durable High-Gloss Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Strengthened w/A Cast Welded Seamless Collar
    • Equipped w/An Open-Back Receiver For Easy Cleaning
    • Made in USA [may include imported hardware]
  • Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Subaru Outback (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 600 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
2015 - Subaru Outback H 3630 Rear 6 Cyl 3.6L 3.6R Limited -

CURT
  • Class 1 Trailer Hitch; 1-1/4in. Receiver; Select Scion FR-S; Subaru BRZ; Toyota
  • 1000lbs. Gross Trailer Weight; 150lbs. Tongue Weight Round Main Body~Drilling Required~Visibility: Exposed~Install Time 45 Minutes
  • CURT 11379 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Scion FR-S; Subaru BRZ; Toyota 86
  • Class I 1.25 in. Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 1000 Lbs.
    • Visibility: Exposed
    • Weight Carrying Capacity: 1000
    • Body Shape: Round
    • WARNING CA Proposition 65: No
    • Drilling Required: Yes
    • Install Time: 45 Minutes
    • WC Tongue Weight: 150
    • Receiver Tube Size: 1.250 In.
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Constructed w/A Sleek Round-Tube Main Body
    • Protected By A Durable High-Gloss Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Strengthened w/A Cast Welded Seamless Collar
    • Equipped w/An Open-Back Receiver For Easy Cleaning
    • Made in USA [may include imported hardware]
  • However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Scion FR-S, Subaru BRZ and Toyota 86 (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 1,000 lbs. GTW and 150 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2015 - Subaru BRZ H 1998 Rear 4 Cyl 2.0L 122

CURT
  • Class 2 Trailer Hitch; 1-1/4in. Receiver; Select Subaru Legacy; Outback
  • 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight Round Main Body~Drilling Required~Visibility: Exposed~Install Time 45 Minutes
  • CURT 12290 Class 2 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Subaru Legacy; Outback
  • Class II 1.25 in. Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 3500 Lbs.
    • Visibility: Exposed
    • Weight Carrying Capacity: 3500
    • Body Shape: Round
    • WARNING CA Proposition 65: No
    • Drilling Required: Yes
    • Install Time: 45 Minutes
    • WC Tongue Weight: 350
    • Receiver Tube Size: 1.250 In.
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Constructed w/A Sleek Round-Tube Main Body
    • Protected By A Durable High-Gloss Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Strengthened w/A Cast Welded Seamless Collar
    • Equipped w/An Open-Back Receiver For Easy Cleaning
    • Made in USA [may include imported hardware]
  • Whatever the next checkpoint is on your adventure -- whether its getting your bike on the trail before sunrise or making it to the campground before dark -- CURT class 2 hitches let you Bring It with confidence. These receiver hitches are made to handle most light-duty towing applications and offer a custom fit for your vehicle. Typically used on full-size cars, crossovers, compact SUVs, minivans or even compact pickup trucks, a CURT class 2 trailer hitch complements the design of smaller vehicles. This particular class 2 hitch is made to be a custom hitch for certain years of the Subaru Legacy and Outback (to verify vehicle compatibility, see application info). It offers a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. Class 2 trailer hitches can typically be used to tow a variety of lightweight trailers, such as a small utility trailer, small fishing boat trailer or popup camper (NOTE: Never exceed the lowest weight capacity of any towing component). They are also perfect for adding cargo space to your vehicle with a bike rack or cargo carrier. This class 2 hitch features a 1-1/4 in. receiver tube to accept a ball mount shank or other hitch-mounted accessory. For safety, it is tested in accordance with SAE J684. A custom trailer hitch design requires extra care, and as such, CURT class 2 hitches are engineered using real vehicles and hands-on research. We use high-strength steel, robotic welding and rigorous testing to produce hitches that are built to fit your lifestyle. To ensure that each hitch will be a reliable extension of your vehicle, we also finish our hitches in a co-curing of liquid Bonderite and black powder coat, giving them long-lasting rust and wear resistance.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2015 - Subaru Legacy H 2498 Rear 4 Cyl 2.5L 152

CURT
  • Class 1 Trailer Hitch; 1-1/4in. Receiver; Select Subaru Impreza; XV Crosstrek
  • 2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Square Main Body~Drilling Required~Visibility: Exposed~Install Time 30 Minutes
  • CURT 11286 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Subaru Impreza; XV Crosstrek
  • Class I 1.25 in. Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 2000 Lbs.
    • Visibility: Exposed
    • Weight Carrying Capacity: 2000
    • Body Shape: Square
    • WARNING CA Proposition 65: No
    • Drilling Required: Yes
    • Install Time: 30 Minutes
    • WC Tongue Weight: 200
    • Receiver Tube Size: 1.250 In.
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Protected By A Durable High-Gloss Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Strengthened w/A Cast Welded Seamless Collar
    • Equipped w/An Open-Back Receiver For Easy Cleaning
    • Backed By A Limited Lifetime Warranty
    • Made in USA [may include imported hardware]
  • However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Subaru Impreza and XV Crosstrek (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2015 - Subaru XV Crosstrek H 1995 Rear 4 Cyl 2.0L -

CURT
  • Class 2 Trailer Hitch; 1-1/4in. Receiver; Select Subaru Outback
  • 3500lbs. Gross Trailer Weight; 525lbs. Tongue Weight Round Main Body~Drilling Required~Visibility: Exposed~Install Time 45 Minutes~Heat Shield Trimming Required~Hole Enlargement Required~Temporarily Lower Exhaust For Installation~Temporarily Remove Heat Shield For Installation
  • CURT 12136 Class 2 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Subaru Outback
  • Class II 1.25 in. Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 3500 Lbs.
    • Visibility: Exposed
    • Weight Carrying Capacity: 3500
    • Body Shape: Round
    • WARNING CA Proposition 65: No
    • Drilling Required: Yes
    • Install Time: 45 Minutes
    • WC Tongue Weight: 350
    • Receiver Tube Size: 1.250 In.
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Protected By A Durable High-Gloss Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Strengthened w/A Cast Welded Seamless Collar
    • Equipped w/An Open-Back Receiver For Easy Cleaning
    • Backed By A Limited Lifetime Warranty
    • Made in USA [may include imported hardware]
  • Whatever the next checkpoint is on your adventure -- whether its getting your bike on the trail before sunrise or making it to the campground before dark -- CURT class 2 hitches let you Bring It with confidence. These receiver hitches are made to handle most light-duty towing applications and offer a custom fit for your vehicle. Typically used on full-size cars, crossovers, compact SUVs, minivans or even compact pickup trucks, a CURT class 2 trailer hitch complements the design of smaller vehicles. This particular class 2 hitch is made to be a custom hitch for certain years of the Subaru Outback (to verify vehicle compatibility, see application info). It offers a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. Class 2 trailer hitches can typically be used to tow a variety of lightweight trailers, such as a small utility trailer, small fishing boat trailer or popup camper (NOTE: Never exceed the lowest weight capacity of any towing component). They are also perfect for adding cargo space to your vehicle with a bike rack or cargo carrier. This class 2 hitch features a 1-1/4 in. receiver tube to accept a ball mount shank or other hitch-mounted accessory. For safety, it is tested in accordance with SAE J684. A custom trailer hitch design requires extra care, and as such, CURT class 2 hitches are engineered using real vehicles and hands-on research. We use high-strength steel, robotic welding and rigorous testing to produce hitches that are built to fit your lifestyle. To ensure that each hitch will be a reliable extension of your vehicle, we also finish our hitches in a co-curing of liquid Bonderite and black powder coat, giving them long-lasting rust and wear resistance.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
2015 - Subaru Outback H 2498 Rear 4 Cyl 2.5L 2.5i Touring 152

CURT
  • Class 3 Trailer Hitch; 2in. Receiver; Select Subaru Outback (Concealed Main Body
  • 4000lbs. Gross Trailer Weight; 600lbs. Tongue Weight; No Drilling Required No Drilling Required~Visibility: Concealed
  • CURT 13410 Class 3 Trailer Hitch; 2-In Receiver; Concealed Main Body; Fits Select Subaru Outback
  • Class III 2 in. Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 4000 Lbs.
    • WARNING CA Proposition 65: No
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Concealed Main Body For OE Look
    • Seamless Integration With The Vehicle
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Protected By A Durable High Gloss Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Equipped With An Open Back Receiver For Easy Cleaning
    • Limited Lifetime Warranty
    • Made in USA [may include imported hardware]
  • Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Subaru Outback (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 600 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
2015 - Subaru Outback H 2498 Rear 4 Cyl 2.5L 2.5i Limited 152

CURT
  • Custom Wiring Harness; 4-Way Flat Output; Select Subaru WRX
  • Circuit Protected And Powered; 3-Wire System; 4 Way Flat; Tail Light Circuit 6.0 Amps; Turn And Brake Circuits 3.0 Amps Install Time 45 Minutes
  • CURT 56259 Vehicle-Side Custom 4-Pin Trailer Wiring Harness; Fits Select Subaru WRX
  • Custom Wiring Harness
  • Product Attributes:
    • Output Type: 4-way Flat
    • Electrical System Type: 3w
    • Converter Type: Circuit Protected Powered
    • WARNING CA Proposition 65: Yes
    • Install Time: 45 Minutes
    • Turn and Brake Circuits: 3.0 Amp
    • Tail Light Circuits: 6.0 Amp
  • Features:
    • Plugs Into Tail Light Assembly To Provide A 4-Way Flat Socket
    • Simple Plug-And-Play Design Eliminates The Need For Splicing
    • 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
    • Equipped w/A Powered 3-Wire To 2-Wire Tail Light Converter
    • Constructed w/Smt Circuitry For Better Performance And Durability
    • Dust Cover Included To Keep Connector Clean When Not In Use
    • Backed By A Limited One-Year Warranty
    • Made In USA
  • If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Subaru WRX (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe its the boat landing at your favorite fishing spot, maybe its a campsite that overlooks one of natures masterpieces, or maybe its the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

Additional Fitment Information:
Vehicle Sub Model Body
2015 - Subaru Impreza Limited Sedan
Showing 1 - 10 of 25 products

Loading...